% \iffalse meta-comment
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% memoize-ext.dtx
% Additions and changes Copyright (C) 2024-2026 Clea F. Rees.
% Code from skeleton.dtx Copyright (C) 2015-2024 Scott Pakin (see below).
%
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either version 1.3c
% of this license or (at your option) any later version.
% The latest version of this license is in
%   https://www.latex-project.org/lppl.txt
% and version 1.3c or later is part of all distributions of LaTeX
% version 2008-05-04 or later.
%
% This work has the LPPL maintenance status 'muaintained'.
%
% The Current Maintainer of this work is Clea F. Rees.
%
% This work consists of all files listed in manifest.txt.
%
% The file memoize-ext.dtx is a derived work under the terms of the
% LPPL. It is based on version 2.4 of skeleton.dtx which is part of
% dtxtut by Scott Pakin. A copy of dtxtut, including the
% unmodified version of skeleton.dtx is available from
% https://www.ctan.org/pkg/dtxtut and released under the LPPL.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \fi
%
% \iffalse
%<*driver>
\GetIdInfo $Id: memoize-ext-expl3.dtx 11978 2026-06-25 01:01:43Z cfrees $ {Extensions for Memoize}
\ProvidesExplFile{\ExplFileName}{\ExplFileDate}{v0.4.3 \ExplFileVersion}{\ExplFileDescription}
\begin{document}
\let\MakePrivateLetters\MyMakePrivateLetters
\DocInput{\filename}
\end{document}
%</driver>
% \fi
%
% \title{\ExplFileName}
% \date{\ExplFileVersion~\ExplFileDate}
% \maketitle
%
% \begin{abstract}
%   \noindent Provides \pkg{memoize-ext-expl3} and \pkg{memoize-ext-expl3-common}.
%   Part of \pkg{memoize-ext}.
% \end{abstract}
%
% \tableofcontents
% 
% 
% \MaybeStop{%
% \PrintChanges
% \PrintIndex
% }
% 
% ^^A \section{Implementation}
%
%<@@=mmzx>
% ^^A common <<<
%<*common>
%    \begin{macrocode}
\GetIdInfo $Id: memoize-ext-expl3.dtx 11978 2026-06-25 01:01:43Z cfrees $ {Extensions for Memoize for expl3 code}
%<!debug>    \ProvidesExplPackage{\ExplFileName-common}{\ExplFileDate}{v0.0 %
%<!debug>     \ExplFileVersion}{\ExplFileDescription}
%<debug>    \ProvidesExplPackage{\ExplFileName-common-debug}{\ExplFileDate}{v0.0 %
%<debug>      \ExplFileVersion}{\ExplFileDescription}
%
%<!debug>    \disable@package@load {memoize-ext-expl3-common-debug}
%<debug>    \disable@package@load {memoize-ext-expl3-common}
{ Only~one~of~memoize-ext-expl3-common~and~memoize-ext-expl3-common-debug~
  should~be~loaded.
  Since~
%<!debug>    memoize-ext-expl3-common
%<debug>    memoize-ext-expl3-common-debug
  ~has~been~loaded,~I~will~ignore~your~request~for~
%<debug>    memoize-ext-expl3-common
%<!debug>    memoize-ext-expl3-common-debug
.}
%    \end{macrocode}
%    \begin{macrocode}
%<!debug>    \RequirePackage{memoize-ext}
%<debug>    \RequirePackage{memoize-ext-debug}
%
%    \end{macrocode}
% We don't want inconsistent names in hooks.
%    \begin{macrocode}
\SetDefaultHookLabel{memoize-ext}
%    \end{macrocode}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \begin{var}{\l_@@_replicating_bool}
%   Internal variable to track whether currently replicating.
%    \begin{macrocode}
\bool_new:N \l_@@_replicating_bool
\bool_set_false:N \l_@@_replicating_bool
%    \end{macrocode}
% \end{var}
% \begin{fn}{%
%   \@@_if_replicating:TF,
%   \@@_if_replicating_p:,
% }
%    \begin{macrocode}
\prg_new_conditional:Npnn \@@_if_replicating: {p,T,TF,F}
{
  \if_bool:N \l_@@_replicating_bool
%<debug>    \@@_debug:n {Replicating~true.} 
    \prg_return_true: 
  \else:
%<debug>    \@@_debug:n {Replicating~false.} 
    \prg_return_false: 
  \fi:
}
%    \end{macrocode}
% \end{fn}
% \begin{macro}{\AdviceRunIfNotReplicating}
%   Run condition.
%    \begin{macrocode}
\cs_new:Npn \AdviceRunIfNotReplicating 
{
  \@@_if_replicating:F 
  { 
%<debug>    \@@_debug:n {Not~replicating,~so~proceeding.}
    \ifmemoizing \AdviceRuntrue \fi 
  }
}
%    \end{macrocode}
% \end{macro}
% \begin{pgfkey}{auto/run~if~not~replicating}
%   Style.
%    \begin{macrocode}
\mmzset{
  auto/run~if~not~replicating/.style = {
    run~conditions={\AdviceRunIfNotReplicating},
  },
}
%    \end{macrocode}
% \end{pgfkey}
% Constants
%    \begin{macrocode}
\cctab_const:Nn \c_@@_expl_at_cctab {
  \cctab_select:N \c_code_cctab 
  \makeatletter
}
\cctab_const:Nn \c_@@_nexpl_at_cctab {
  \cctab_select:N \c_code_cctab 
  \makeatletter
  \int_set:Nn \tex_endlinechar:D { 13 }
  \char_set_catcode_space:n      { 9 }
  \char_set_catcode_space:n      { 32 }
  \char_set_catcode_active:n     { 126 } % tilde
}
%    \end{macrocode}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% expl3, memoizing côd ynddo
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% hooks instead of \texse[David Carlisle]{a/748807/}
% \begin{var}{\l_@@_expl_bool}
% A boolean to track whether \texttt{expl3} syntax is active or not.
% \texseans[yn lle ateb \textbar{} in place of]{748807}[David Carlisle]
%    \begin{macrocode}
\bool_new:N \l_@@_expl_bool
%    \end{macrocode}
% \end{var}
% \begin{fn}{%
%   \@@_restore_ccmemo_input:,
%   \@@_saved_mmzxExplAtBegin:,
%   \@@_saved_mmzxExplAtEnd:, 
% }
%   Initialise.
%    \begin{macrocode}
\cs_new_protected_nopar:Npn \@@_restore_ccmemo_input: {}
\cs_new_protected_nopar:Npn \@@_saved_mmzxExplAtBegin: {}
\cs_new_protected_nopar:Npn \@@_saved_mmzxExplAtEnd: {}
%    \end{macrocode}
% \end{fn}
% Auto-switching for \texttt{expl3} syntax.
%    \begin{macrocode}
\hook_gput_code:nnn {begindocument/end}{.}
{
  \bool_set_false:N \l_@@_expl_bool
}
%    \end{macrocode}
%    \begin{macrocode}
\hook_gput_code:nnn {begindocument/end}{.}
{
%<debug>    \@@_debug:n {Tracking~expl3~syntax~changes.}
  \bool_set_false:N \l_@@_expl_bool
  \hook_gput_code:nnn {cmd/ExplSyntaxOn/before} { . }
  {
    \bool_if:NF \l_@@_expl_bool
    {
      \bool_set_true:N \l_@@_expl_bool
      \ifmmz@direct@ccmemo@input
        \relax
      \else
        \cs_set_protected_nopar:Npn \@@_restore_ccmemo_input:
        {
          \mmz@direct@ccmemo@inputfalse
        }
      \fi
      \mmz@direct@ccmemo@inputtrue
      \cs_set_eq:NN \@@_saved_mmzxExplAtBegin: \mmzxExplAtBegin
      \cs_set_eq:NN \@@_saved_mmzxExplAtEnd: \mmzxExplAtEnd
      \@@_expl_at_start:
    }
  }
%    \end{macrocode}
% \cs{ExplSyntaxOn} rewrites \cs{ExplSyntaxOff}, so it doesn't work to add hook code to \cs{ExplSyntaxOff} directly.
%    \begin{macrocode}
  \hook_gput_code:nnn {cmd/ExplSyntaxOn/after} { . }
  {
    \hook_gput_code:nnn {cmd/ExplSyntaxOff/before} { . }
    {
      \bool_set_false:N \l_@@_expl_bool
      \cs_set_eq:NN \mmzxExplAtBegin \@@_saved_mmzxExplAtBegin:
      \cs_set_eq:NN \mmzxExplAtEnd \@@_saved_mmzxExplAtEnd:
      \@@_restore_ccmemo_input:
    }
  }
}
%    \end{macrocode}
% fns mewnol
% \begin{fn}{\@@_cctab_end:}
% just for symmetry \dots
%    \begin{macrocode}
\cs_new_eq:NN  \@@_cctab_end: \cctab_end:
%    \end{macrocode}
% \end{fn}
% \begin{fn}{%
%   \@@_expl_at_begin:,
%   \@@_nexpl_at_begin:,
%   \@@_expl_at_start:,
%   \@@_nexpl_at_start:,
%   \@@_cctab_stop:,
% }
%   Convenience wrappers for cat code changes.
%    \begin{macrocode}
\cs_new_protected_nopar:Npn \@@_expl_at_begin: 
{
  \cctab_begin:N \c_@@_expl_at_cctab
}
\cs_new_protected_nopar:Npn \@@_nexpl_at_begin: 
{
  \cctab_begin:N \c_@@_nexpl_at_cctab
}
\cs_new_nopar:Npn \@@_expl_at_start:
{
  \cs_set_nopar:Npn \mmzxExplAtBegin {@@_expl_at_begin:}
  \cs_set_nopar:Npn \mmzxExplAtEnd {@@_cctab_end:}
}
\cs_new_nopar:Npn \@@_nexpl_at_start:
{
  \cs_set_nopar:Npn \mmzxExplAtBegin {@@_nexpl_at_begin:}
  \cs_set_nopar:Npn \mmzxExplAtEnd {@@_cctab_end:}
}
\cs_new_protected_nopar:Npn \@@_cctab_stop:
{
  \cs_set_nopar:Npn \mmzxExplAtBegin {relax}
  \cs_set_nopar:Npn \mmzxExplAtEnd {relax}
}
%    \end{macrocode}
% \end{fn}
% toks memoize (cyhoeddus yn unig)
%
% The code here is constant but the meaning changes, so what is added to the memos reflects the configuration at the time.
% \changes{v0.3.2}{2026-03-14}{Modified \cs{xtoksapp} means all engines can use the same code here.}
%    \begin{macrocode}
\appto\mmzAtBeginMemoization{
%<debug>    \@@_debug:n {Appending~expl~begin~to~ccmemo~at~end~
%<debug>      \string\mmzAtBeginMemoization.}
  \xtoksapp\mmzCCMemo
  {
    \exp_not:N \csname \mmzxExplAtBegin \exp_not:N \endcsname
  }
%<debug>    \exp_args:No \@@_debug:n {\the\mmzCCMemo}
}
%<debug>    \cs_log:N \mmzAtBeginMemoization 
\preto\mmzAtEndMemoization{
%<debug>    \@@_debug:n {Appending~expl~end~to~ccmemo~at~start~
%<debug>      \string\mmzAtEndMemoization.}
  \xtoksapp\mmzCCMemo
  {
    \exp_not:N \csname \mmzxExplAtEnd \exp_not:N \endcsname
  }
}
%<debug>    \cs_log:N \mmzAtEndMemoization 
%    \end{macrocode}
% init
%
% ^^A If tagging, we allow \texttt{expl3} syntax and \verb|@|, but don't switch spaces or new lines as that would screw up marked content.
%    \begin{macrocode}
\hook_gput_code:nnn { begindocument/end } {mmzx}
{
% ^^A   \tag_if_active:TF
% ^^A   {
% ^^A %<debug>    \@@_debug:n {Enabling~direct~ccmemo~input~and~cat~code}
% ^^A %<debug>    \@@_debug:n {management~required~for~tagging.}
% ^^A     \mmz@direct@ccmemo@inputtrue
% ^^A     \@@_nexpl_at_start:
% ^^A   } {
% ^^A %<debug>    \@@_debug:n {Tagging~not~active.~Adjusting~cat~code~management.}
    \@@_cctab_stop:
% ^^A   }
}
%    \end{macrocode}
%</common>
% ^^A >>>
%
% ^^A sty <<<
%<*sty>
%    \begin{macrocode}
\GetIdInfo $Id: memoize-ext-expl3.dtx 11978 2026-06-25 01:01:43Z cfrees $ {Extensions for Memoize for replicating expl3 functions and variables}
%<!debug>    \ProvidesExplPackage{\ExplFileName}{\ExplFileDate}
%<!debug>     {v0.4.3 \ExplFileVersion}{\ExplFileDescription}
%<debug>    \ProvidesExplPackage{\ExplFileName-debug}{\ExplFileDate}
%<debug>      {v0.4.3 \ExplFileVersion}{\ExplFileDescription}
%
%<!debug>    \disable@package@load {memoize-ext-expl3-debug}
%<debug>    \disable@package@load {memoize-ext-expl3}
{ Only~one~of~memoize-ext-expl3~and~memoize-ext-expl3-debug~
  should~be~loaded.
  Since~
%<!debug>    memoize-ext-expl3
%<debug>    memoize-ext-expl3-debug
  ~has~been~loaded,~I~will~ignore~your~request~for~
%<debug>    memoize-ext-expl3
%<!debug>    memoize-ext-expl3-debug
.}
%    \end{macrocode}
%    \begin{macrocode}
%<!debug>    \RequirePackage{memoize-ext}
%<debug>    \RequirePackage{memoize-ext-debug}
%<!debug>    \RequirePackage{memoize-ext-expl3-common}
%<debug>    \RequirePackage{memoize-ext-expl3-common-debug}
%
%    \end{macrocode}
% We don't want inconsistent names in hooks.
%    \begin{macrocode}
\SetDefaultHookLabel{memoize-ext}
%    \end{macrocode}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% expl3 replicators
%
% todo: figure out how to maintain correct grouping \dots
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% \begin{var}{%
%   \g_@@_expl_replicate__bb_tl,
%   \g_@@_expl_replicate__ba_tl,
%   \g_@@_expl_replicate__tb_tl,
% }
% Variables
%    \begin{macrocode}
\tl_new:N \g_@@_expl_replicate__bb_tl 
\tl_new:N \g_@@_expl_replicate__ba_tl 
\tl_new:N \g_@@_expl_replicate__tb_tl 
\tl_gput_right:NV \g_@@_expl_replicate__bb_tl \c_left_brace_str
\tl_gput_right:Nn \g_@@_expl_replicate__bb_tl {#}
\tl_gput_right:NV \g_@@_expl_replicate__ba_tl \c_right_brace_str
\tl_gput_right:Nn \g_@@_expl_replicate__tb_tl {#}
%    \end{macrocode}
% \end{var}
% \begin{fn}{%
%   \@@_expl_replicate_fn_aux:nnN,
%   \@@_expl_replicate__aux:n, 
% }
% Generic auxiliary functions for replication.
% The first does the actual replicating; the second delegates details according to the argument specification.
%    \begin{macrocode}
\cs_new:Npn \@@_expl_replicate_fn_aux:nnN #1#2#3
{
  \cs_if_exist:cF { __mmzx_rep_#1:#2 } 
  { 
    \int_zero:N \l_@@_tmpa_int
    \tl_clear:N \l_@@_tmpa_tl
    \tl_clear:N \l_@@_tmpc_tl
    \tl_map_function:nN {#2} \@@_expl_replicate__aux:n
    \cs_if_exist:cF { __mmzx_rep_#1:\l_@@_tmpc_tl }
    {
      \cs_gset_protected:ce {__mmzx_rep_#1:\l_@@_tmpc_tl} 
      {
        \xtoksapp\mmzCCMemo{ 
          \exp_after:wN \exp_not:N \cs:w #1:#2 \cs_end: \l_@@_tmpa_tl
        }
        \exp_not:N \expandonce \exp_not:N \AdviceOriginal \l_@@_tmpa_tl
        \exp_not:N \group_end:
        \@@_tmp_cctab_stop:
      }
    }
    \str_if_eq:eeF {#2}{\l_@@_tmpc_tl}
    { % ych!
      \cs_new_eq:cc {__mmzx_rep_#1:#2} {__mmzx_rep_#1:\l_@@_tmpc_tl}
    }
  }
  \use:c { __mmzx_rep_#1:#2 }
}
\cs_new:Npn \@@_expl_replicate__aux:n #1
{
  \int_incr:N \l_@@_tmpa_int
  \str_case:nnF { #1 }
  {
    {c} { \@@_expl_replicate__b: }
    {e} { \@@_expl_replicate__b: }
    {o} { \@@_expl_replicate__b: }
    {p} { }  
    {n} { \@@_expl_replicate__b: }
    {v} { \@@_expl_replicate__b: }
    {D} { }  
    {F} { \@@_expl_replicate__b: }
    {N} { \@@_expl_replicate__t: }
    {T} { \@@_expl_replicate__b: }
    {V} { \@@_expl_replicate__t: }
    {w} { \@@_expl_replicate__e: }  
  }{                                         
    \@@_expl_replicate__e:
  }
}
%    \end{macrocode}
% \end{fn}
% \begin{fn}{%
%   \@@_expl_replicate__b:,
%   \@@_expl_replicate__t:,
%   \@@_expl_replicate__e:,
% }
% Type-specific auxiliaries.
% We don't need to be very specific here.
% We just need to distinguish argument specifiers which expect braced groups from those which expect single tokens and from those we cannot automate.
%    \begin{macrocode}
\cs_new_nopar:Npn \@@_expl_replicate__b:
{
  \tl_put_right:Nn \l_@@_tmpc_tl {n}
  \tl_put_right:NV \l_@@_tmpa_tl \g_@@_expl_replicate__bb_tl
  \tl_put_right:Ne \l_@@_tmpa_tl { \int_to_arabic:n { \l_@@_tmpa_int } }
  \tl_put_right:NV \l_@@_tmpa_tl \g_@@_expl_replicate__ba_tl
}
\cs_new_nopar:Npn \@@_expl_replicate__t: 
{
  \tl_put_right:Nn \l_@@_tmpc_tl {N}
  \tl_put_right:NV \l_@@_tmpa_tl \g_@@_expl_replicate__tb_tl
  \tl_put_right:Ne \l_@@_tmpa_tl { \int_to_arabic:n { \l_@@_tmpa_int } }
}
\cs_new_nopar:Npn \@@_expl_replicate__e:
{
  \PackageError{mmzx}{No~do,~sorry.~Use~replicate~with~args~instead.}{}
}
%    \end{macrocode}
% \end{fn}
% \begin{fn}{%
%   \@@_expl_replicate_fn:,
%   \@@_tmp_cctab_stop:,
% }
% \begin{macro}{\mmzx@expl@replicate@fn}
% For replicating \texttt{expl3} \emph{functions}.
% \changes{v0.3.3}{2026-03-14}{Switch cat codes if necessary.}
%    \begin{macrocode}
\cs_new_eq:NN \@@_tmp_cctab_stop: \@@_noop:
\cs_new:Npn \@@_expl_replicate_fn:
{
  \bool_set_false:N \l_@@_tmpa_bool
  \str_if_eq:eeT {\mmzxExplAtEnd} {relax}
  {
    \bool_set_true:N \l_@@_tmpa_bool
    \@@_nexpl_at_start:
    \xtoksapp\mmzCCMemo {
      \exp_not:N \csname \mmzxExplAtBegin \exp_not:N \endcsname
    }
    \cs_set:Npn \@@_tmp_cctab_stop:
    {
      \xtoksapp\mmzCCMemo {
        \exp_not:N \csname \mmzxExplAtEnd \exp_not:N \endcsname
      }
      \@@_cctab_stop:
    }
  }{
    \cs_set_eq:NN \@@_tmp_cctab_stop: \@@_noop:
  }
  \group_begin:
    \bool_set_true:N \l_@@_replicating_bool
    \exp_last_unbraced:Ne \@@_expl_replicate_fn_aux:nnN 
      { \exp_args:NV \cs_split_function:N \AdviceReplaced }  
}
\cs_new_eq:NN \mmzx@expl@replicate@fn \@@_expl_replicate_fn:
%    \end{macrocode}
% \end{macro}
% \end{fn}
% \begin{pgfkey}{%
%   mmz/auto/replicate~expl~fn,
%   mmz/auto/replicate~expl~var,
% }
% By default we handle |\tex_savepos:D| since this commonly requires replication in the kinds of environments typically subject to memoization.
% Another candidate is |\int_gincr:N|, but that results in a large number of additions and it is not at all clear these are generally required or desirable.
% Don't do this.
% It breaks stuff.
%    \begin{macrocode}
\mmzset{% config <<<
  auto/replicate~expl~fn/.style={
    run~if~not~replicating,
    outer~handler=\mmzx@expl@replicate@fn,
  },
}% >>>
%    \end{macrocode}
% ^^A   auto~csname={tex_savepos:D}{replicate~expl~fn,},
% \end{pgfkey}
%</sty>
% ^^A >>>
% 
%\Finale
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 
%^^A vim: et:tw=0:sw=2:ts=2:foldmethod=marker:fmr=<<<,>>>:
