# changelog

author: Jeremy Katz <katzj@redhat.com> 0.91-3
changelog:
  - include patch from Denis Kitzmen to fix typo causing several options to 
    never be defined (in upstream CVS)
  - include patch from upstream CVS to make displaymem always use hex for 
    consistency
  - add patch from GRUB mailing list from Keir Fraser to add a --once flag to
    savedefault function so that you can have the equivalent of lilo -R 
    functionality (use 'savedefault --default=N --once' from the grub shell)
  - back to autoconf


author: Jeremy Katz <katzj@redhat.com> 0.91-2
changelog:
  - don't ifdef out the auto memory passing, use the configure flag instead
  - add a patch so that grub respects mem= from the kernel command line when 
    deciding where to place the initrd (#52558)


author: Jeremy Katz <katzj@redhat.com> 0.91-0.20020102cvs
changelog:
  - update to current CVS snapshot to fix some of the hangs on boot related
    to LBA probing (#57503, #55868, and others)


author: Jeremy Katz <katzj@redhat.com> 0.90-13
changelog:
  - include additional patch from Erich to add sync calls in grub-install to 
    work around updated images not being synced to disk
  - fix segfault in grub shell if 'password --md5' is used without specifying
    a password (#55008)


author: Jeremy Katz <katzj@redhat.com> 0.90-12
changelog:
  - Include Erich Boleyn <erich@uruk.org>'s patch to disconnect from the 
    BIOS after APM operations.  Should fix #54375


author: Jeremy Katz <katzj@redhat.com> 0.90-11
changelog:
  - grub-install: if /boot/grub/grub.conf doesn't exist but /boot/grub/menu.lst 
    does, create a symlink


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - pull in patch from upstream CVS to fix md5crypt in grub shell (#52220)
  - use mktemp in grub-install to avoid tmp races


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - update to current CVS 
  - forward port VGA16 patch from Paulo César Pereira de 
    Andrade <pcpa@conectiva.com.br>
  - add patch for cciss, ida, and rd raid controllers
  - don't pass mem= to the kernel


author: Petr Sabata <psabata@redhat.com> 1.2.1-10
changelog:
  - Initscript changed to reset to default values if no minimal or maximal
    CPU speed is defined in configuration
  - Resolves: rhbz#616524


author: Jarod Wilson <jarod@redhat.com> 1.2.1-9
changelog:
  - Start cpuspeed after syslog on boot so its messages are logged (#516244)
  - Don't load acpi-cpufreq by default on Intel 7100 series processors,
    due to a hardware bug that can lead to a lockup (#449004)
  - Minor initscript exit status fixups (#495049)


author: Jarod Wilson <jarod@redhat.com> 1.2.1-8
changelog:
  - Revert fixes for #488924, they unfortunately lead to cpuspeed
    never starting on boot on xen kernels, since cpuspeed starts
    before xend (#498406)


author: Jarod Wilson <jarod@redhat.com> 1.2.1-7
changelog:
  - Handle case under kernel-xen where xm is unavailable and/or
    we can't communicate with xend (additional fix for #488924)


author: Jarod Wilson <jarod@redhat.com> 1.2.1-6
changelog:
  - Don't try loading speedstep-centrino if acpi-cpufreq already
    successfully loaded, it causes p-state issues (#485480)
  - If we're running on a Xen kernel and the number of virtual cpus
    doesn't match the number of physical cpus, we could end up
    scaling the wrong physical cpu due to migration, so in the
    vcpus != pcpus case, don't do freq scaling (#488924)


author: Jarod Wilson <jarod@redhat.com> 1.2.1-5
changelog:
  - Support for speedstep-centrino module fallback if
    new-and-improved acpi-cpufreq doesn't work (#463488)


author: Jarod Wilson <jwilson@redhat.com> 1.2.1-3
changelog:
  - Disable freq scaling by default on AMD rev F and earlier
    cpus when running xen, due to clock instability (#435321)


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Fix up exit codes for LSB compliance (#237940)
  - Try loading acpi-cpufreq even on systems that don't
    report enhanced speedstep support (#216702)
  - Indentation and variable usage cleanup


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Fix error-suppression for systems that report support
    for est, but have it disabled in the bios (#220200)


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Fix up documentation in config file (#219926)
  - Fall back cleanly to userspace governor on
    non-centrino/powernow-k8/p4-clockmod systems
  - Update description to reflect support for
    kernel-space freq scaling


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Turn on ia64 builds (#216702)
  - Fix status on xen kernels
  - Move config file to /etc/sysconfig/cpuspeed, more
    appropriate for initscript configs (#152305)
  - Manify 'cpuspeed --help' along with other details (#172655)
  - Tweak cpuspeed default thresholds (#147565)
  - Let non-centrino/powernow-k8 systems also use other
    validated governors (#219926)
  - Fix cpuspeed daemon options settings (#221829)
  - Fix status and condrestart for centrino/powernow-k8 (#219926)
  - Give feedback when loading/unloading a cpufreq governor
  - Rework config file and initscript to make it much easier
    for end-users to adjust frequency scaling setup (#151761)
  - Log start/stop events with useful info
  - Don't start on xen kernels (freq scaling not supported)
  - Set lock file for centrino/powernow-k8 so status 
    indicates we do have scaling working 
  - Fix up centrino/powernow-k8 stop function (#213999)


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Spec tweaks to bring in line with Fedora packaging guidelines
  - Add docs to package
  - Mark config file as noreplace
  - Be sure to stop service before uninstall


author: Dave Jones <davej@redhat.com>
changelog:
  - Merge patch from Michal Jaegermann <michal@harddata.com>
    that solves the acpi-cpufreq problem in an improved
    way and fixes several other nits.


author: Dave Jones <davej@redhat.com>
changelog:
  - Only load acpi-cpufreq on speedstep capable machines.
  - Unload acpi-cpufreq if BIOS tables didn't exist or
    other acpi-cpufreq failures occured.


author: Dave Jones <davej@redhat.com>
changelog:
  - Remove a bunch of no-longer needed gunk from the initscript.
  - Use on-demand governor on centrino/core based systems for now,
    as it seems to have a better effect.


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-83
changelog:
  - make net-tools actually build after dist-git conversion
  - correct 'netstat --sctp -n' output (#982179)
  - 'netstat --sctp -n' was crashing on bad input (#982638)


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-82
changelog:
  - hostname -s returns short host name even if the host name doesn't resolve (#319981)
  - mii-tool now checks only generic MII registers defined in <linux/mii.h> (#531980)
  - fixed statistics.c to use unsigned long long (instead of int)
    to handle 64 bit integers (#622734)
  - prevent 'netstat -nr -A inet6' from smashing stack
    when /proc/net/ipv6_route is broken (#668047)
  - Improve route(8) man page saying that 'route mss' actually sets MTU (#699698)
  - patch netstat to separate basename of -p only if it is absolute path in order
    to make argv[0]="sshd pty/0" display as sshd, and not as /0 (#707427)
  - plipconfig man page and usage output fixes (#707460)
  - improved netstat_stop_trim.patch to not truncate IPV6 UDP sockets (#732983)


author: Jiri Popelka <jpopelka@redhat.com> - 1.60-79
changelog:
  - fixed warning: Interface eth0 still in ALLMULTI mode (#477876)
  - fixed german man page for arp (#322901)
  - fixed tcp timers info in netstat (#466845)
  - fixed ifconfig's man page (#453918)
  - fixed buffers lengths in statistics.c (#493314)


author: Radek Vokál <rvokal@redhat.com> - 1.60-76
changelog:
  - make sctp quiet on systems without sctp and also add description to netstat.8
  - fixed arp unaligned access error
  - netplugd init script fixed
  - Resolves: #242916, #220438, #229232


author: Radek Vokal <rvokal@redhat.com> 1.60-57
changelog:
  - add note to hostname man page about gethostbyname() (#166581)
  - don't ship any rarp man page (#170537)


author: Radek Vokal <rvokal@redhat.com> 1.60-52
changelog:
  - don't show "duplicate line" warning (#143933)
  - netstat has new statistcs (#133032)
  - /etc/neplug is owned by net-tools (#130621)


author: Radek Vokal <rvokal@redhat.com> 1.60-50
changelog:
  - added mii-diag tool
  - added newer ether-wake
  - remove useless -i option from ifconfig
  - stop trimming interface names (#152457)


author: Radek Vokal <rvokal@redhat.com> 1.60-48
changelog:
  - behaviour of netstat -i option changed (#115987)
  - netstat -i shows all interface, -I<Iface> only one


author: Radek Vokal <rvokal@redhat.com> 1.60-44
changelog:
  - net-plug-1.2.9 - no changes, upstream included Red Hat patches
  - ether-wake-1.08 - few changes in implementation (#145718)


author: Radek Vokal <rvokal@redhat.com> 1.60-43
changelog:
  - don't report statistics for virtual devices (#143981) <kzak@redhat.com>
  - fixing translation headers - content type format
  - kill bitkeeper warning messages


author: Radek Vokal <rvokal@redhat.com> 1.60-40
changelog:
  - mii-tool(8) fixed, labeled as obsolete, added info (#138687)
  - netstat crashing on i64 fixed (#138804) Patch by <Andreas.Hirstius@cern.ch>


author: Radek Vokal <rvokal@redhat.com> 1.60-39
changelog:
  - IBM patch for netstat -s returning negative values on 64bit arch (#144064)
  - broadcast calulated if only netmask provided (#60509)


author: Radek Vokal <rvokal@redhat.com> 1.60-38
changelog:
  - fixed fail to assign the specified netmask before adress is assigned
  - patch by Malita, Florin <florin.malita@glenayre.com>


author: Phil Knirsch <pknirsch@redhat.com> 1.60-27
changelog:
  - Fixed compiler warning/error in netplug.
  - Updated to netplug-1.2.6 for security update and fixes.


author: Phil Knirsch <pknirsch@redhat.com> 1.60-19
changelog:
  - Fixed trailing blank bug in hostname output (#101263).
  - Remove -O2 fir alpha (#78955).
  - Updated netstat statistic output, was still broken.


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Added inet6-lookup patch from John van Krieken (#84108).
  - Fixed outdated link in ifconfig manpage (#91287).


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Fixed incorrect address display for ipx (#46434).
  - Fixed wrongly installed manpage dirs (#50664).


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - fix nstrcmp() to be correct in the case where there are many devices 
    of the same type, eg, "eth10" > "eth1"  (#61436)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 1.57.
  - MTU (and other) option(s) not parsed correctly (#9215).
  - allow more granularity iwth --numeric (#9129).


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 1.50.
  - added slattach/plipconfig/ipmaddr/iptunnel commands.
  - enabled translated man pages.


author: Jan Synáček <jsynacek@redhat.com> -2:2.3.14-18
changelog:
  - Fix leaking file descriptors (#852274)
  - Fix: Service disabled due to bind failure (#811000)
  - CVE-2012-0862 xinetd: enables unintentional services over tcpmux port (#788795)


author: Vojtech Vitek (V-Teq) <vvitek@redhat.com> - 2:2.3.14-16
changelog:
  - Add additional missing patch to fix log message flooding (#754444)
  - Add additional missing patch to fix no_files limit (#639447)


author: Vojtech Vitek (V-Teq) <vvitek@redhat.com> - 2:2.3.14-14
changelog:
  - Add poll.patch - replace select() by poll() (#639447)
  - Change License field to xinetd
  - Change order of patches, rename contextmerge.patch to contextconf.patch
    (and adapt) for fedora/RHEL-6 patches compatibility


author: Vojtech Vitek (V-Teq) <vvitek@redhat.com> - 2:2.3.14-13
changelog:
  - Fix rpmlint errors: Prereq tag substituted with Requires tag,
    removed config mark from /etc/rc.d/init.d/xinetd executable


author: Vojtech Vitek (V-Teq) <vvitek@redhat.com> - 2:2.3.14-11
changelog:
  - Fix return values of xinetd.init script (LSBC Specification 3.2)
    Resolves: #498119
  - Avoid possible hang while logging an unexpected signal
    Resolves: #501604
  - Move documentation of xinetd.log to the right man section
    Resolves: #428811
  - Fix crash when application's logfile hit size limit
    Resolves: #438986
  - Let RPC services bind to a specific port
    Resolves: #624800


author: James Antill <james.antill@redhat.com> - 2:2.3.14-10.el5
changelog:
  - Use SC_SERVER instead of SC_SERVER_ARGV
  - Fix getpeercon() for LABELED networking MLS environments
  - Resolves: rhbz#209379


author: Jay Fenlason <fenlason@redhat.com> 2:2.3.14-2
changelog:
  - Upgrade to new upstream version.  This obsoletes the -libwrap,
    -rpc, -banner, -bug140084 and -gcc4 patches.


author: Jay Fenlason <fenlason@redhat.com> 2:2.3.13-4
changelog:
  - Added patch committed to upstream CVS to fix bz#140084
    (error logging accidentally using one of [012] as the syslog
    descriptor)


author: Jay Fenlason <fenlason@redhat.com>
changelog:
  - Add patch to allow multiple rpc services to cooexist as long as they're
    different program numbers or different versions.


author: Jay Fenlason <fenlason@redhat.com> 2.3.13-1
changelog:
  - Upgrade to new upstream version, which obsoletes most patches.
  - Add new tcp_rpc patch, to turn on the nolibwrap flag on tcp rpc services,
    since libwrap cannot be used on them.


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - use new technology to filter python dep for inetdconvert instead
    of changing the -x bit on file permissions


