# changelog

author: Bill Nottingham <notting@redhat.com>
changelog:
  - lock only needs to be a gid
  - don't set dspmbyte=euc here; do it in lang.csh, and only if necessary (#50318)


author: Nalin Dahyabhai <nalin@redhat.com> 2.4.15-1
changelog:
  - reorder /etc/services to match comments again
  - protocol 118 is stp, not st
  - update URLs in /etc/protocols and /etc/services


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.4.10-1
changelog:
  - Fix bugs #24159 and #30634 again; whoever moved bashrc from bash
    to setup used an old version. :((


author: Bill Nottingham <notting@redhat.com>
changelog:
  - overhaul /etc/protocols (#18530)
  - add port 587 to /etc/services (#25001)
  - add corbaloc (#19581)
  - don't set /usr/X11R6/bin in $PATH if it's already set (#19968)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Clean up /etc/services, separating registered numbers from unregistered
    ("squatted") numbers, and adding some.


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Add smtps (465/tcp) and submission (587/tcp) to /etc/services for TLS
    support (postfix >= 20001030-2)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - split csh.login into csh.login and csh.cshrc (#various)
  - fix pop service names (#6206)
  - fix ipv6 protocols entries (#6219)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - rename /etc/csh.cshrc to /etc/csh.login (#2931).
  - (note: modified /etc/csh.cshrc should end up in /etc/csh.cshrc.rpmsave)


author: Erik Troan <ewt@redhat.com>
changelog:
  - removed /etc/inetd.conf, /etc/rpc
  - flagged /etc/securetty as missingok
  - fixed buildroot stuff in spec file


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - do not check with "id" if running as root (/usr/bin/id)
  - link statically against -lwrap (from /usr/lib)


author: Daniel J Walsh <dwalsh@redhat.com> 4.0-50
changelog:
  - Change spec file to stop building auxilliary files
  - Fix Makefile to build correctly on x86-64
  - Fix strerror.c to build correctly on x86-64


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - fix manpage (#13218)
  - gettextize 
  - exit if /etc/sysconfig/network doesn't exist
    and make sure it works when networking is off (#23757)


author: Philipp Knirsch <pknirsch@redhat.com>
changelog:
  - Fixed a build warning for daemon.c (missing <stdlib.h> include)
  - Portmap now running under user rpc if possible (#12427)


author: Than Ngo <than@redhat.de>
changelog:
  - /etc/rc.d/init.d -> /etc/init.d
  - condrestart in %postun
  - fix initscript
  - add requires initscript
  - remove links from packaging


author: Erik Troan <ewt@redhat.com>
changelog:
  - added restart, status commands to init script
  - added chkconfig support
  - uses a buildroot and %attr tags


author: Akira TAGOH <tagoh@redhat.com> - 1.2.0-5
changelog:
  - scim-anthy-fix-kana-conversion.patch: fix direct kana conversion feature
    to get that work correctly. (#215692)


author: Akira TAGOH <tagoh@redhat.com> - 1.2.0-2
changelog:
  - scim-anthy-libtool-export.patch: fix a typo.
  - scim-anthy-fix-pending-state.patch: fix not composing roman character
    properly when any characters are still in pending queue after deleting.
    (#208074)
  - scim-anthy-dict-encoding.patch: revert the default dictionary encoding to
    EUC-JP.


author: Akira TAGOH <tagoh@redhat.com> - 1.2.0-1
changelog:
  - New upstream release.
  - scim-anthy-1.0.0-pseudo-ascii*.patch: merged into upstream.
    removed from srpm.


author: Akira TAGOH <tagohr@edhat.com> - 1.0.0-4
changelog:
  - scim-anthy-1.0.0-pseudo-ascii.patch,
    scim-anthy-1.0.0-pseudo-ascii-insert-space.patch: applied to allow the ASCII
    characters with the capital letter without even turning off the IME. (#187721)


author: Akira TAGOH <tagoh@redhat.com> - 1.0.0-1
changelog:
  - New upstream release.
    - can input numerals when the candidate window doesn't appear. (#185934)
  - scim-anthy-symbol-style.patch: removed.
  - add Requires: gettext-devel
  - run aclocal and autoconf as well to regenerate Makefile properly.


author: Akira TAGOH <tagoh@redhat.com> - 0.9.0-3
changelog:
  - scim-anthy-symbol-style.patch: applied a backport patch from upstream CVS to
    add an UI for the symbol style. (#178400)


author: Jens Petersen <petersen@redhat.com> - 0.9.0-2
changelog:
  - build conditionally with libstdc++so7 preview library (#166041)
    - add with_libstdc_preview switch and tweak libtool to link against newer lib
  - add scim-anthy-helper-moduledir.patch to tweak the helper module install dir,
    since scim.pc now returns moduledir with api-version
  - remove anthy-imengine-helper.la


author: Akira TAGOH <tagoh@redhat.com> - 0.8.0-2
changelog:
  - scim-anthy-wide-latin.diff: applied to fix a problem that the input character
    appears twice with the full size alphanumeric mode.


author: Akira TAGOH <tagoh@redhat.com> - 0.5.3-4
changelog:
  - Import into Core.
  - relying the file dependencies instead of the explicit package dependency
    of anthy since anthy-libs was gone.
  - clean up the spec file.


author: Ryo Dairiki <ryo-dairiki@mbm.nifty.com>
changelog:
  - add xinput.d alternatives setup in %post and %postun
  - provide scim-ja_JP and only uninstall xinput.d-ja_JP alternative if
    no scim-ja_JP left


author: Johnny Hughes <johnny@centos.org> - 2.16.0-1.el4.centos
changelog:
  - Modifed the spec file to change "Red Hat, Inc" to "CentOS" for the
    --with-gnome-distributor= configure variable.


author: Ray Strode <rstrode@redhat.com> - 2.10.0-5
changelog:
  - Let's try this gettext patch one more time--maybe, just
    maybe, I'll get it right this time (bug 155659).


author: Mark McLoughlin <markmc@redhat.com> 2.5.90-1
changelog:
  - Update to 2.5.90
  - Remove hack to get rid of GNOME_COMPILE_WARNINGS and
    use --disable-compile-warnings instead.
  - Package the (L)GPL/FDL and gnome-feedback docs


author: Havoc Pennington <hp@redhat.com>
changelog:
  - also obsolete gnome-core-devel
  - require redhat-artwork and redhat-menus
  - build require Xft/fontconfig


author: Dan Horák <dhorak@redhat.com> 2.2.4-22.el5_4.1
changelog:
  - fixed CKR_TEMPLATE_INCOMPLETE exception on an unwrap of an AES key (#540471)
  - fixed MAC computing during offload of MAC-hashing to CPACF using PKCS11 (#540474)
  - Resolves: #540471, #540474


author: Phil Knirsch <pknirsch@redhat.com> 2.2.4-22.el5
changelog:
  - Fixed memcmp problem for pkcsconf validation of PINs (#415931)
  - Fixed double free problem in key store (#435462)


author: Phil Knirsch <pknirsch@redhat.com> 2.2.4-17.el5
changelog:
  - Added the CCA STDLL for s390(x) arch (#253059)
  - Fixed a file descriptor leak for spin locks (#371021)


author: Phil Knirsch <pknirsch@redhat.com> - 2.2.4-12.el5
changelog:
  - Moved the .so lib to the devel package (#219242)
  - Added proper multilib requirements for devel package (#219242)


author: Phil Knirsch <pknirsch@redhat.com> - 2.2.4-5.el5
changelog:
  - Added the other archs according to #184631
  - Split out the devel parts of openCryptoki in a devel subpackage (#184631)


author: Phil Knirsch <pknirsch@redhat.com> 2.1.5-6.10
changelog:
  - Fixed quite a few warnings and actual errors (#143768)
  - Fixed the initscript for failed startups (#154495)


author: Phil Knirsch <pknirsch@redhat.com> 2.1.3-8
changelog:
  - Included updated initscript from IBM (#112542).
  - Changed permission of /etc/init.d/pkcsslotd to be executable (#112542).


author: Phil Knirsch <pknirsch@redhat.com> 2.1.3-4
changelog:
  - Fixed some smaller build problems.
  - Included and fixed new initscript for pkcs11 startup.
  - Fixed filelist.


author: Jindrich Novy <jnovy@redhat.com> 10.35.58-7.el5
changelog:
  - rebase to 10.35.58 (#479017)
  - fix ppmfade, ppmrainbow
  - fix doublefree corruption and couple of memleaks in pnmtofiasco
  - fix cmuwmtopbm and other utilities by making endianess
    functions work correctly on 64bit systems (#476863)
  - fix ppmdfont and ppmddumpfont and svgtopam (thanks to Jiri Moskovcak)
  - add BR: ghostscript
  - use correct macro arguments (#246707)
  - fix segfault in ximtoppm (#482867)
  - fix options in pamperspective, pbmtoepson, ppmpat, pamaddnoise,
    cameratopam, fiascotopnm so that they match their man pages
    (#483011, #483070, #483243, #483245, #482829, #482839)
  Resolves: #246707, #479017, #476864, #476867, #483011, #483070
  Resolves: #483243, #483245, #482867, #482829, #482839


author: Jindrich Novy <jnovy@redhat.com> 10.35-1
changelog:
  - update to 10.35
  - drop .pnmtopng, .rgbtxt patches, fixed upstream
  - sync .xwidfix, .ppmtompeg patches
  - regenerate man pages


author: Jindrich Novy <jnovy@redhat.com> 10.34-8
changelog:
  - readd pbmtols, author claims it's LGPL (#202519)
  - add .l1 suffixes to tarball names to reflect legal fixes
    in the upstream release with the same NVR


author: Jindrich Novy <jnovy@redhat.com> 10.34-6.fc6
changelog:
  - regenerate man pages so that makewhatis isn't confused (#204991)
    (upstream makeman script was broken -> now fixed)


author: Jindrich Novy <jnovy@redhat.com> 10.34-4.fc6
changelog:
  - legal fixes (#202519):
  - remove pbmtols, spottopgm, jbig and hpcd stuff from source
    and doc tarballs


author: Jindrich Novy <jnovy@redhat.com> 10.34-3.fc6
changelog:
  - pamscale won't waste all system resources by usage of uninitialized
    variables for output image resolution (#199871)
  - use %{?dist}


author: Jindrich Novy <jnovy@redhat.com> 10.34-1
changelog:
  - update to 10.34
  - drop .ppmtogif, .nstring patches
  - remove some overflow checks from .security patch, it's
    now resolved in the new upstream version
  - don't use svgalib by default (don't compile/ship ppmsvgalib)
  - don't compile svgtopam because of the libxml dependency
  - add BuildRequires libX11-devel
  - fix build on x86_64 and ppc64


author: Jindrich Novy <jnovy@redhat.com> 10.33-2
changelog:
  - fix image corruption in ppmtogif, thanks to Gilles Detillieux (#188597)
  - fix nsting.h to let pnmtopng and other utilities using seekable opening
    mode work on x86_64 (#188594)


author: Jindrich Novy <jnovy@redhat.com> 10.33-1
changelog:
  - update to 10.33
  - drop upstreamed .ppmdepth patch
  - fix segfault in ppmtompeg when encoding jpeg images (#185970)


author: Jindrich Novy <jnovy@redhat.com> 10.32-1
changelog:
  - update to 10.32
  - drop .msbmp patch, applied upstream
  - sync the rest of the patches
  - regenerate man pages


author: Jindrich Novy <jnovy@redhat.com> 10.31-3
changelog:
  - fix segfault caused by usage of uninitialized variables while
    parsing cmdline arguments in pnmtopng (#179645)
  - add validity check for date/time in pnmtopng
  - fix unchecked sscanf reads


author: Jindrich Novy <jnovy@redhat.com> 10.30-1
changelog:
  - update to 10.30
  - update manpath, gcc4 patches
  - update security patch - fixed length problem in rle_addhist
  - update partly upstreamed bmptopnm, pnmtopng patches
  - drop manpath patch
  - regenerate man pages


author: Jindrich Novy <jnovy@redhat.com> 10.29-1
changelog:
  - update to 10.29
  - drop upstreamed .libpm, .pnmtojpeg, .pbmtolj patches
  - update .CAN-2005-2471 patch


author: Jindrich Novy <jnovy@redhat.com> 10.28-2
changelog:
  - fix segfault in pbmtolj caused by unchecked assertions
    caused by definition of NDEBUG (#160429)
  - drop hunk from .security patch causing dual inclusion
    of string.h in pbmtolj.c


author: Jindrich Novy <jnovy@redhat.com> 10.28-1
changelog:
  - update to 10.28
  - regenerated man pages
  - sync .security, .security2, .badlink, .libpm, .gcc4 patches
  - drop upstreamed .pngtopnm, .pnmcolormap patches


author: Jindrich Novy <jnovy@redhat.com> 10.27-2
changelog:
  - fix invalid strcmp condition in bmptopnm, typo in pnmtojpeg
    (David Constanzo, #157106, #157118)
  - proper read longs and shorts in libpm.c (David Constanzo, #157110)
  - fix segfault in bmptopnm caused by freeing an uninitialized pointer


author: Jindrich Novy <jnovy@redhat.com> 10.27-1
changelog:
  - update to the new 10.27 release
  - update .security2, .security patch
  - regenerate man pages
  - remove jbig, hpcd
  - remove config_template from /usr
  - don't create symlink to pamtopnm


author: Jindrich Novy <jnovy@redhat.com> 10.26.4-3
changelog:
  - fix overflow checking of integers with incompatible endianess
    causing problems using xwdtopnm (#147790)


author: Jindrich Novy <jnovy@redhat.com> 10.26.4-2
changelog:
  - add .gcc4 patch to fix some missing declarations of headers,
    some pointer signedness mismatches, remove xmalloc2
  - rebuilt with gcc4


author: Jindrich Novy <jnovy@redhat.com> 10.26.4-1
changelog:
  - update to netpbm-10.26.4, remove jbig, hpcd
  - this version fixes #149924
  - regenerate man pages (don't include man pages without binaries - #146863)


author: Jindrich Novy <jnovy@redhat.com> 10.26-1
changelog:
  - update to netpbm-10.26-1, remove jbig, hpcd
  - regenerate man pages, remove man pages for non existent binaries
  - update security patch, additional fixes
  - drop upstreamed misc patch, merge malloc patch with security patch


author: Jindrich Novy <jnovy@redhat.com> 10.25-3
changelog:
  - include man pages in troff format, thanks to Michal Jaegerman (#136959)
  - drop bmpbpp patch, fixed upstream
  - remove pcdovtoppm, ppmsvgalib, vidtoppm man pages because binaries
    for them are not present (#136471)


author: Jindrich Novy <jnovy@redhat.com> 10.25-1
changelog:
  - update to latest upstream 10.25
  - drop initvar patch
  - update security, misc patch
  - add bmpbpp patch to use only appropriate bit depths for BMP (#135675)


author: Jindrich Novy <jnovy@redhat.com> 10.23-1
changelog:
  - updated to netpbm-10.23 upsteam (and removed jbig, hpcd)
  - $TMPDIR patch removed, obsolete
  - updated gcc34 patch
  - removed nestedfunc patch, already applied in upstream version
  - updated security patch to conform to 10.23 (mostly in ppmtompeg/frame.c)


author: Phil Knirsch <pknirsch@redhat.com> 10.22-2
changelog:
  - Fixed Zero byte allocation error in bmptopnm (#123169)
  - Honour the $TMPDIR in ppmfade (#117247)
  - Fixed nested function bug (#117377)
  - Fixed several uninitialized variables (#117377)


author: Phil Knirsch <pknirsch@redhat.com> 10.22-1
changelog:
  - Update to latest upstream version 10.22 (also for docs).
  - Removed jbig and hdcp code from tarball.


author: Phil Knirsch <pknirsch@redhat.com> 10.19-4
changelog:
  - Fixed several tmp vulnerabilities in scripts and apps. Based on Debian
    security fix for netpbm-9.24.


author: Phil Knirsch <pknirsch@redhat.com> 10.19-3
changelog:
  - Included doc tarball with manpages (#114755).
  - Fixed small manpage incorrectness (#84922).
  - Fixed message from giftopnm (#114756).


author: Phil Knirsch <pknirsch@redhat.com> 9.24-3
changelog:
  - Fixed a possible gcc compiler problem for inline struct parameters (#62181).
  - Added missing .map files to progs files selection (#61625).


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Updated to netpbm version 9.14
  - Removed pnmtotiff resize patch as it is now part of the original package
  - Removed pstopnm csh fix as it is now part of the original package
  - Removed asciitopgm memcpy fix as it is now part of the original package
  - Removed manpages patch as it is now part of the original package


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - Fixed bugzilla bug #19487 where asciitopgm dumped core on Alpha. Actually
    dumped core everywhere


author: Philipp Knirsch <pknirsch@redhat.de>
changelog:
  - update to 9.9
  - Due to patent infringement problems removed the jbig support from the tarball
    (pnm/jbig + Makefile changes) and created a new tarball


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 9.8
  - make sure shhopt.h is included in the -devel package (#19672)
  - rename shhopt.h to pbmshhopt.h because it's not the same as the normal
    shhopt.h that other things (like util-linux) expect


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - move netpbm-progs to the Applications/Multimedia group
  - reintroduce patches from the old libgr package


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - make sure all man pages are included (#9328)
  - fix pstopnm bomb when xres == yres (#9329)
  - add libjpeg and libz because libtiff now needs them


author: Michael Johnson <johnsonm@redhat.com>
changelog:
  - removed old png.h header file that was causing png utils to die
  - build png in build instead of install section...


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - altered install so that the package installs now even if a previous
    version was not installed on the system


author: Donnie Barnes <djb@redhat.com>
changelog:
  - changed copyright from "distributable" to "freeware"
  - added some missing scripts that existed in netpbm
  - added some binaries that weren't getting built
  - added patch to build tiff manipulation progs (requires libtiff)


author: Donnie Barnes <djb@redhat.com>
changelog:
  - updated to 2.0.13
  - dropped libjpeg and libtiff (those should come from home sources)
  - removed glibc patch (new version appears to have it!)
  - added i686 as a valid arch type to config.guess


author: Peter Bieringer <pb@bieringer.de>
changelog:
  - Add doc directory also to %files to make sure the directory will be removed
     on update or deinstall
  - change install permissions for entries in doc directory
  - change "make install" to "make installonly" (make test should be only executed once"


author: Joe Orton <jorton@redhat.com> 1.2.2-2
changelog:
  - avoid linking against -lrt
  - don't print -L${libdir} in --libs output
  - don't export -lcrypt/-luuid in .la file


author: Joe Orton <jorton@redhat.com> 0.9.6-6
changelog:
  - don't override CFLAGS at build time
  - allow setting TCP_NODELAY and TCP_CORK concurrently
  - use _exit() not exit() in child if exec*() fails (upstream #30913)


author: Joe Orton <jorton@redhat.com> 0.9.6-5
changelog:
  - add from 0.9.x branch:
   * fix for apr_{uid,gid}_* error handling (r239592)
   * fix for apr_file_ write flushing (r267192)
  - add backport for use of readdir64_r (r265032, r265681, r265684)


author: Joe Orton <jorton@redhat.com> 0.9.4-22
changelog:
  - backport fixes from HEAD:
   * correct implementation of nested mutexes
   * support for POSIX semaphores on LP64 platforms


author: Joe Orton <jorton@redhat.com> 0.9.4-15
changelog:
  - add support for setuid/setgid/sticky bits (André Malo)
  - add apr_threadattr_{guardsize,stacksize}_set() (latter by Jeff Trawick)


author: Joe Orton <jorton@redhat.com> 0.9.4-14
changelog:
  - enable posixsem and process-shared pthread mutex support, but
    ensure that sysvsem remains the default mechanism


author: Joe Orton <jorton@redhat.com> 0.9.4-13
changelog:
  - entirely remove 2Gb file size limit from apr_file_copy();
    fixes "svnadmin hotcopy" on repos with >2Gb strings table
  - work around getnameinfo bugs with v4-mapped addresses
  - fix apr_time_exp_get() for dates in 2038 (Philip Martin)


author: Joe Orton <jorton@redhat.com> 0.9.4-10
changelog:
  - fix configure check for mmap of /dev/zero
  - just put -D_GNU_SOURCE in CPPFLAGS not _{BSD,SVID,XOPEN}_SOURCE


author: Joe Orton <jorton@redhat.com> 0.9.4-6
changelog:
  - define apr_off_t as int/long/... to prevent it changing
    with _FILE_OFFSET_BITS on 32-bit platforms


author: Joe Orton <jorton@redhat.com> 0.9.3-7
changelog:
  - use AI_ADDRCONFIG in getaddrinfo() support (#73350)
  - include a working libtool script rather than relying on
   /usr/bin/libtool (#97695)


author: Nalin Dahyabhai <nalin@redhat.com> 2.7-3
changelog:
  - properly terminate an alloca'ed string in yppasswd which would lead to
    improper rejection of the request if the user's pw_passwd was visible


author: Alex Larsson <alexl@redhat.com> 2.6-3
changelog:
  - Add patch that handles MD5 passwords and HPU/X password aging.
  - This should hopefully fix #19045 and #22667


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - put yppasswd again in the package, 'cause it is the right thing to do
    (sorry djb!)
  - obsoletes old, unmaintained yppasswd package


author: Donnie Barnes <djb@redhat.com>
changelog:
  - pulled from contrib into distribution (got fresh sources).  Thanks
    to Thorsten Kukuk <kukuk@vt.uni-paderborn.de> for the original.
  - used fresh sources


author: David Cantrell <dcantrell@redhat.com> - 3.11-3
changelog:
  - Remove com32/include/time.h and com32/include/sys/times.h
  - Replace CLK_TCK macros with CLOCKS_PER_SEC


author: Peter Jones <pjones@redhat.com> - 3.06-1
changelog:
  - update to 3.06 , which should fix the directory parsing bug that wedges it
    with diskboot.img
  - change README to README* in doc, to include README.menu and README.usbkey


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - lss16toppm and ppmtolss16 are both perl scripts... turn off find-requires
    so we don't suck in perl as a dependency for syslinux


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - update to 1.75
  - include tools to create graphical image format needed by syslinux
  - include isolinux 
  - include pxelinux (#64942)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - use %{_tmppath}
  - change application group (Applications/Internet doesn't seem
    right to me)
  - added BuildRequires


author: Miloslav Trmač <mitr@redhat.com> - 2.9.7-1.1.el5.2
changelog:
  - Use the maximum of atime, mtime and ctime when checking whether a file is
    obsolete
    Resolves: #373301


author: Miloslav Trmac <mitr@redhat.com> - 2.9.7-1.1.el5.1
changelog:
  - Fix some format string mismatches (backport from 2.9.8)
  - Automatically exclude aquota.{group,user} files in filesystem root
    directories (backport from 2.9.10)
    Resolves: #213654


author: Miloslav Trmac <mitr@redhat.com> - 2.9.6-1
changelog:
  - Add --exclude-user (original patch by Brett Pemberton)
  - Fix too long line in /etc/cron.daily/tmpwatch


author: Miloslav Trmac <mitr@redhat.com> - 2.9.3-1
changelog:
  - Silently ignore ENOENT if somebody removes files faster than us (#154960)
  - Handle failures to exec fuser
  - Fix check for negative grace periods


author: Miloslav Trmac <mitr@redhat.com> - 2.9.1-1
changelog:
  - Add --exclude, use it to preserve X socket directories (#107069)
  - Allow multiple directory arguments with relative paths (#91097)
  - Don't manually strip the binary


author: Mike A. Harris <mharris@redhat.com> 2.9.0-1
changelog:
  - Added Solaris/HPUX support to tmpwatch via patch from Paul Gear (#71288)
  - Rebuild in rawhide as 2.9.0-1


author: Mike A. Harris <mharris@redhat.com> 2.8.3-1
changelog:
  - Added support for large files with 64bit offsets by adding to CFLAGS
    -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 bug (#56961)


author: Preston Brown <pbrown@redhat.com> 2.8-1
changelog:
  - added a "nodirs" option which inhibits removal of empty directories.
  - Integrated race condition fixes from Martin Macok (#50148)
  - do not try to remove ext3 journal files (#50522)


author: Preston Brown <pbrown@redhat.com>
changelog:
  - Patch from enrico.scholz@informatik.tu-chemnitz.de allows concurrent 
    usage of mtime, ctime, and atime checking (#19550).


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - use execle() instead of system() to get the correct return code, fixes from
    Jeremy Katz <katzj@linuxpower.org>


author: Preston Brown <pbrown@redhat.com>
changelog:
  - support for CTIME from jik@kamens.brookline.ma.us
  - fixes for fuser checks from Ian Burrell <iburrell@digital-integrity.com>.
  - remove directories when empty without --all flag, to be consistent w/docs.


author: Paul Gear <paulgear@bigfoot.com>
changelog:
  - HP-UX port (including doco update)
  - Tweaked Makefile to allow installation into different base directory
  - Got rid of GETOPT_... defines which didn't do anything, so that short
    equivalents for all long options could be defined.
  - Fixed bug in message() where 'where' file handle was set but unused
  - Changed most fprintf() calls to message()


author: Preston Brown <pbrown@redhat.com>
changelog:
  - I am the new maintainer
  - fixed cleanup of directories
  - added --quiet flag
  - freshen manpage
  - nice patch from Kevin Vajk <kvajk@ricochet.net> integrated


author: Erik Troan <ewt@redhat.com>
changelog:
  - added man page to package
  - uses a buildroot and %attr
  - fixed error message generation for directories
  - fixed flag propagation


author: Roman Rakus <rrakus@redhat.com> - 1.4.3-13
changelog:
  - There are some nonsense warnings and errors while using usermod,
    so ignore them.
    Resolves: #458144


author: Roman Rakus <rrakus@redhat.com> - 1.4.3-10
changelog:
  - Set home dir for user ident to /
    Resolves: #458144
  - Identify right error in get_tok_uint and similar functions
    Resolves: #438787
  - Work rigth with valist when logging is on.
    Resolves: #446844


author: Adrian Havill <havill@redhat.com> - 1.4.2-8
changelog:
  - tweak setting of uid/gid for key file so systems with no prior
    ident user/group don't generate a warning (#135837)


author: Adrian Havill <havill@redhat.com> - 1.4.2-4
changelog:
  - slightly better error checking for insane cases
  - tweak of the openssl requires dependency loop (#131291)
  - as ident.key is created in %post, tweak so verify passes (#131530)
  - make the uid/gid for ident conform to the past (#135752)


author: Adrian Havill <havill@redhat.com> - 1.4.0-1
changelog:
  - revise makefile; don't over-optimize as gcc can produce bad code
  - ptr cleanup when multiquery and missing /proc/net/tcp*
  - improve create_opt (error handling, debugging, identifiers)
  - add --prefix option for matching IPv4 to IPv6


author: Adrian Havill <havill@redhat.com> - 1.3.4-1
changelog:
  - retry reading proc with pauses to reduce false negatives
  - match IPv4 addresses against IPv6 compatibility addresses


author: Adrian Havill <havill@redhat.com> - 1.3.1-1
changelog:
  - increase default connections-per-sec/max-instances for HP
  - more doc cleanup
  - remove unnecessary rootdir check for -N/--ident


author: Adrian Havill <havill@redhat.com> - 1.3.0-1
changelog:
  - add unknown-error only -e option
  - edit readme, add rfc to docdir
  - code cleanup; remove static buffers, orthagonalize id names
  - ipv6 hybrid addr zero run correction
  - extra eight bits added to random key


author: Adrian Havill <havill@redhat.com> - 1.2.7-1
changelog:
  - added Provides to satisfy HP pkg rpm dep (#121447, #111640)
  - more code cleanup; minimize --resolve dns lookups


author: Adrian Havill <havill@redhat.com> - 1.2.4-1
changelog:
  - code vet and minor changes re alan@'s comments
  - default operating mode to alias all usernames as 'nobody'
    to prevent noobies from getting their mail addr harvested
  - clean up README documentation


author: Adrian Havill <havill@redhat.com> - 1.2.3-1
changelog:
  - mark xinetd conf file as a noreplace config file
  - more robust error checking for proper rfc1413 tokens


author: Adrian Havill <havill@redhat.com> - 1.2.0-1
changelog:
  - A few tweaks in the cmdline options for orthagonality
  - minor bug fix regarding reading from stdin in some multiquery cmdline cases
  - add --resolve


author: Adrian Havill <havill@redhat.com> - 1.0.0-2
changelog:
  - Obsolete pidentd -- authd and pidentd can't/shouldn't coexist on FC/RHEL
  - license tweak to allow openssl under any condition
  - no spec url needed; package is not worthy enough.


author: Peter Vrabec <pvrabec@redhat.com> 3.22-17
changelog:
  - fix truncation of mailbox when running into a disk quota or a
    full partition. Patch from Solar Designer.


author: Trond Eivind Glomsrød <teg@redhat.com> 3.22-4
changelog:
  - Add Telsa Gwynne's procmailrc as a doc file - it's
    excellently commented, and is a great example


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Change to "License: GPL or artistic" from "Copyright: distributable"
  - Fix man page (#35825)
  - 3.15.1
  - redo config patch


author: Tim Waugh <twaugh@redhat.com> 0.19-20.2
changelog:
  - Prevent eggcups crash when hostnames contain an underscore
    (bug #436919).
  - Fixed last patch (bug #434879).


author: Colin Walters <walters@redhat.com>
changelog:
  - New upstream version
  - Disable session cupsd
  - Add evil find+perl command to change namespace back to com.redhat
    until we adapt Fedora cups patch


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Fixed up signal names that were looking for org.redhat in the
    cvs backport.  Change to read com.redhat.  This should change to
    upstream's org.gnome in the near future.


author: Colin Walters <walters@redhat.com> 0.18-1
changelog:
  - New upstream version
    - Drop upstreamed patch int-gsize
    - Drop upstreamed patch no-help
    - Drop upstreamed patch use-usb-if-null
    - Drop upstreamed patch use-printer-uri


author: John (J5) Palmieri <johnp@redhat.com> 0.17-3
changelog:
  - use_usb_if_null patch makes sure that the make and model of the 
    printer is never null even if hal does not populate the
    printer.vendor and info.product fields.  (Bug #136666)


author: Colin Walters <walters@redhat.com> 0.17-2
changelog:
  - Backport patches from CVS:
    - eggcups-int-gsize.patch (fixes type conflict on x86_64)
    - eggcups-no-help.patch (rh bug 135919)


author: John (J5) Palmieri <johnp@redhat.com> 0.15.2-2
changelog:
  - Added patch that fixes the values placed in gconf for
    configuring printer.
    - Values now represent the make and model the user selected
      and not what hal reports


author: Colin Walters <walters@redhat.com> 0.15.2-1
changelog:
  - Update to new upstream 0.15.2:
    - Does not crash when run as root
    - Does not crash if you have no printers (workaround HAL bug)


author: Colin Walters <walters@redhat.com> 0.14-1
changelog:
  - Update to new upstream 0.14
    + Try to re-set drivers on startup
    + Avoid multiple copies by using DBus activation


author: Colin Walters <walters@redhat.com> 0.12-1
changelog:
  - Update to new upstream 0.12
    + Fixes several serious bugs in driver prompt
    + Also installs policy to make sure we do not get kicked
      off D-BUS
  - Disable GConf schema install


author: Colin Walters <walters@redhat.com> 0.10.2-3
changelog:
  - Remove removal of eggcups.desktop.
  - Install eggcups-upgrade.desktop in session-upgrades directory to ensure
    eggcups runs in the user session after an upgrade.


author: Colin Walters <walters@redhat.com> 0.10-1
changelog:
  - Update to 0.10.1
  - Enable session CUPS daemon
  - Require hal-cups-utils per j5 request
  - Nuke eggcups_version variable, just use version
  - Remove unneeded deps on perl, gnome-utils, file
  - Remove upstreamed dbus-header-fix patch


author: Colin Walters <walters@redhat.com> 0.9.5-2
changelog:
  - Kill off tryprint.pl
  - Fix description to reflect current reality
  - TODO: kill off this package entirely and just put eggcups
    in its own package.  If importing a new package wasn't
    so annoying...


author: Colin Walters <walters@redhat.com> 0.9-1
changelog:
  - Insert my tendrils into this package
  - Bump version 0.9, just for fun
  - Update to eggcups 0.9
  - Remove desktop file link and stuff, we don't need it
  - Remove deps on system-config-printer, etc
  - Remove upstreamed eggcups patches
  - Change description to remove "Nautilus"
  - Bump dbus deps to >= 0.20


author: Tim Waugh <twaugh@redhat.com> 0.1.10-26
changelog:
  - Don't poll cupsd; rely on D-BUS for notifications.  This prevents cups
    generating never-ending useless log messages.


author: Tim Waugh <twaugh@redhat.com> 0.1.10-17
changelog:
  - Drop the kprinter requirement; fall back to redhat-config-printer's
    simple print dialog app (bug #97178).


author: Havoc Pennington <hp@redhat.com> 0.1.10-10
changelog:
  - rebuild for dbus 0.9
  - tweak dbus patch to use dbus_message_name_is(), 
    also DBUS_ERROR_DISCONNECT should not need detecting
    (you always get the DBUS_MESSAGE_LOCAL_DISCONNECT on disconnect)


author: Tim Waugh <twaugh@redhat.com> 0.1.5-5
changelog:
  - Remove tmpfile vulnerability from debug logging.
  - s/printconf/redhat-config-printer-gui/.
  - Use redhat-config-printer-gui in preference to CUPS HTTP configuration.


author: Norm Murray <nmurray@redhat.com>
changelog:
  - big updates to the tryprint.pl script to save file sniff info and 
    to handle a double-click by bringing up a printer configuration tool


author: Caius Chance <cchance@redhat.com> - 0.3.0-8.el5
changelog:
  - Resolves: rhbz#219431 (Up arrow button in candidate window doesn't work.)
  - Resolves: rhbz#220290 (Candidate list (symbol) page change inaccuracy.)
  - Resolves: rhbz#218565 (Candidate list not cleared before re-display.)
    <<< rhbz#220288 is replaced by rhbz#218565.


author: Elliot Lee <sopwith@redhat.com> 3.1-3
changelog:
  - Fix mozilla building/notbuilding to consistently use mozilla_archs macro
  - Remove -O0 cflags from November


author: Than Ngo <than@redhat.com> 3.0.3-1.1
changelog:
  - Added missing requires kdelibs-devel in kdebindings-devel (bug #73992)
  - Fixed typo bug (bug #51669)
  - Added Buildprereq arts-devel instead kdelibs-sound
  - Fixed to build on s390/s390x/x86_64


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.2-0.cvs20020614
changelog:
  - Update to current stable branch to make it work with Qt 3.0.4
  - Enable building Java bindings (with jdkgcj)


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-1
changelog:
  - 3.0.0 final
  - Disable building C, Java and Objective-C bindings for now, they require
    a real C++ compiler rather than a something-between-C-and-C++-compiler


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.0-0.cvs20020130.1
changelog:
  - Update
  - Get the qt java bindings to build with gcj
  - Temporarily disable building KDE-C, KDE-Java, DCOP-perl and DCOP-python
    bindings; they don't compile.


author: Mike A. Harris <mharris@redhat.com> 2.1.10
changelog:
  - Updated libXft to version 2.1.10
  - Specify freetype dependencies as >= 2.1.9-1
  - Futureproof builds by adding release number to fontconfig dependencies.


author: Mike A. Harris <mharris@redhat.com> 2.1.8.1-1
changelog:
  - Updated libXft to version 2.1.8.1 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.
  - Added "Requires: libXrender-devel" to -devel subpackage for (#175465)


author: Mike A. Harris <mharris@redhat.com> 2.1.7-4
changelog:
  - Added "BuildRequires: fontconfig-devel >= 2.2" dependency that was
    previously missed.  Also added "Requires: fontconfig >= 2.2" runtime
    dependency.
  - Added missing defattr to devel subpackage.


author: Tomas Smetana <tsmetana@redhat.com> - 1:5.38-1
changelog:
  - upgrade to 5.38
  - fix #438556 - upgrade request
  - fix #456471 - SELinux prevents smartd from monitoring 3ware RAID


author: Tomas Smetana <tsmetana@redhat.com> - 1:5.36-4
changelog:
  - fix #232168 - wrong exit status of the init script
  - fix #326551 - smartctl hangs the system when run on PERC controller


author: Tomas Mraz <tmraz@redhat.com> - 1:5.36-3.1
changelog:
  - set cloexec on device descriptor so it doesn't leak to sendmail (#214182)
  - fixed minor bug in initscript (#213683)
  - backported SATA disk detection from upstream


author: Tomas Mraz <tmraz@redhat.com> - 1:5.36-2
changelog:
  - kudzu is deprecated, replace it with HAL (#195752)
  - moved later in the boot process so haldaemon is already running
    when drives are being detected


author: Tomas Mraz <tmraz@redhat.com> - 1:5.33-5
changelog:
  - add default /etc/sysconfig/smartmontools file
  - ignore errors on startup (#186130)
  - test drive for SMART support before adding it to smartd.conf


author: Tomas Mraz <tmraz@redhat.com> 1:5.33-3
changelog:
  - add libata disks with -d ata if the libata version
    is new enough otherwise do not add them (#145859, #174095)


author: Tomas Mraz <tmraz@redhat.com> 1:5.33-2
changelog:
  - Spec file cleanup by Robert Scheck <redhat@linuxnetz.de> (#170959)
  - manual release numbering
  - remove bogus patch of non-installed file
  - only non-removable drives should be added to smartd.conf
  - smartd.conf should be owned (#171498)


author: Jiri Moskovcak <jmoskovc@redhat.com> - 2.2.39-5
changelog:
  - rpmdiff fixes
  - don't zip changelog
  - libacl-devel requires specific libacl version
  - Resolves: #500095


author: Jiri Moskovcak <jmoskovc@redhat.com> - 2.2.39-4
changelog:
  - fixed exitcodes rhbz#368451
  - fixed segfault with -- --file rhbz#430458
  - fixed symlink handling when -P is used rhbz#436070
  - fixed problems with hebrew chars rhbz#507747
  - fixed handling of relative symlinks rhbz#500095
  - Resolves: #368451, #430458, #436070, #507747, #500095


author: Thomas Woerner <twoerner@redhat.com> 2.2.39-1
changelog:
  - new version 2.2.39
  - fixed usage of long UTF-8 filenames (#183181)
    Thanks to Andrey for the initial patch.


author: Stephen C. Tweedie <sct@redhat.com> 2.2.7-3
changelog:
  - Add /usr/include/acl to files manifest
  - Fix location of doc files, add main doc dir to files manifest


author: Michael K. Johnson <johnsonm@redhat.com> 2.0.11-1
changelog:
  - Initial Red Hat package
    Made as few changes as possible relative to upstream packaging to
    make it easier to maintain long-term.  This means that some of
    the techniques used here are definitely not standard Red Hat
    techniques.  If you are looking for an example package to fit
    into Red Hat Linux transparently, this would not be the one to
    pick.
  - acl-devel -> libacl-devel


author: Warren Togami <wtogami@redhat.com> 0.10.0-1
changelog:
  - upgrade to 0.10.0
  - Spec cleanups
  - Remove INSTALL, add NEWS
  - Add new binaries
  - libtool, auto* not needed


author: Peter Jones <pjones@redhat.com> - 1.8.1-4
changelog:
  - Flush devices from parted's device cache, or else they become stail when
    devices are renamed (removes destroy() call).
  - Resolves: #219965


author: David Cantrell <dcantrell@redhat.com> - 1.8.1-2
changelog:
  - Add parted.PedDevice.destroy() call to ped_device_destroy() in libparted.
    Needed to remove cached devices from the device list so future get()
    calls return correct info.
  - Related: rhbz#218861


author: David Cantrell <dcantrell@redhat.com> - 1.8.1-1
changelog:
  - Rebuild for GNU parted-1.8.1
  - Determine Python version to use in %build so the source RPM is more
    easily moved between distribution releases.
  - Resolves: rhbz#218087


author: David Cantrell <dcantrell@redhat.com> - 1.8.0-1
changelog:
  - Bump version to 1.8.0 and require parted >= 1.8.0
  - Remove python-abi Requires line since rpm handles that automatically


author: Jeremy Katz <katzj@redhat.com> - 1.6.8-1
changelog:
  - update for new parted ABI
    - device -> heads, sectors, cylinders now refer to the bios geometry
  - require parted >= 1.6.12


author: Jeremy Katz <katzj@redhat.com>
changelog:
  - Initial build split out into separate source from the parted package.
  - Don't build on ppc64 right now due to parted build problems (#118183)


author: Karsten Hopp <karsten@redhat.com> - 4.1.10-2.fc6
changelog:
  - buildrequire intltool which was previously pulled in by scrollkeeper but
    dropped this requirement because of bz #203606


author: Tim Waugh <twaugh@redhat.com> 4.13b-57.2
changelog:
  - Build requires psutils.  This fixes processing of input files in
    PostScript format (bug #241855).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Build requires ImageMagick for a2ps.cfg to use convert(1) (bug #215982).
  - Build requires groff-perl for a2ps.cfg to use grog(1) (bug #215982).


author: Tim Waugh <twaugh@redhat.com> 4.13b-43
changelog:
  - Fixed font path (bug #142294).
  - Fixed problems in make_fonts_map script (bug #142299).  Patch from
    Michal Jaegermann.


author: Tim Waugh <twaugh@redhat.com> 4.13b-42
changelog:
  - Fixed configure.in.
  - Fixed m4 files.
  - Apply patch from bug #122699 to fix "too many includes" error.


author: Tim Waugh <twaugh@redhat.com> 4.13b-31
changelog:
  - Build requires gperf.
  - Fix problems in .y file spotted by stricter bison.
  - Fix reference to a2ps binary (bug #112930).


author: Tim Powers <timp@redhat.com>
changelog:
  - rebuild on all arches
  - remove lingering files from the buildroot that we aren't shipping
  - pass %{_libdir} and %{_datadir} to configure so that we are lib64'ized
  - fix bad perms on some files


author: Tim Waugh <twaugh@redhat.com> 4.13b-24
changelog:
  - Prevent configure from going interactive (bug #70333).
  - Try to cope with UTF-8 a little bit (bug #70057).


author: Tim Waugh <twaugh@redhat.com> 4.13b-18
changelog:
  - Fix a2ps-4.13-conf.patch (bug #31360).
  - Add documentation about the default behaviour concerning LC_PAPER
    (bug #43829).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Fix build with newer compiler.
  - s/Copyright:/License:/.
  - Use C locale's decimal point style (bug #53715).


author: SATO Satoru <ssato@redhat.com>
changelog:
  - support Japanese
  - bzip2-ed all patches
  - replace macros (%makeinstall, %configure) with traditional 
    commands to avoid some troubles those macros caused.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Using letter is as weird as oz, fl. oz, Fahrenheit, lb etc. 
    Add a patch for using the glibc media type for giving US
    letter for en_US (only locale with this paper), and A4
    for everyone else.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - New-style prereq line.
  - %post script requires fileutils (mv) and sh-utils (true).  This
    should fix bug #24251).


author: Tim Powers <timp@redhat.com>
changelog:
  - update to 4.13b to fix some bugs, thanks to czar@acm.org for giving me a
    heads up on this (bug #15679)


author: Tim Powers <timp@redhat.com>
changelog:
  - fixed bug 12451 which was a stupid mistake by me.
  - quiet the post section
  - added patches from michal@ellpspace.math.ualberta.ca and did some spec file
    magic he suggested as well.


author: Tim Powers <timp@redhat.com>
changelog:
  - fixed bug 5876, was not setting the paper size to Letter again :(
  - man pages and info pages to /usr/share, FHS compliant.
  - used macros wherever possible


author: Tim Powers <timp@redhat.com>
changelog:
  - had to be more specific since the i18n stuff was removed from the package.
  	There is a new a2ps-i18n package which treats the
  	/usr/share/a2ps/afm/fonts.map file as a config file


author: Jindrich Novy <jnovy@redhat.com> 394-2
changelog:
  - apply better fix for #120916 from Avi Kivity (#177819)
    to avoid flickering when '>' is pressed multiple times


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - fix korean #79977
  - add new less.sh from #89780, s/ko/korean/ and write .csh script
  - add patch from #91661: /japanses/japanese-euc/


author: Karsten Hopp <karsten@redhat.de> 378-5
changelog:
  - removed older, unused patches
  - add patch from Yukihiro Nakai to fix display of japanese text
    (#79977)


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - less-378
  - added some debian patches
  - show image info instead of binary garbage when viewing images


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - update URLs
  - Copyright -> License
  - fix #43348 (crashes when searching for /<)
  - fix #39849 (
    _ ignores LESSCHARDEF in displaying characters,
    _ prefaces sequences of one or "high" characters with a capital "A")


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix up messed output if a user outputs anything in ~/.bashrc or the
    likes (Bug #9443)
  - handle RPM_OPT_FLAGS


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update to v346
  - Update download URL
  - use the configure marcro
  - strip binary
  - fix up lesspipe stuff (Bug #8750 and a couple of non-reported bugs)
    (Karsten, did I mention I'll kill you when you return from SAP? ;) )


author: Ville Skyttä <ville.skytta at iki.fi> - 1.58-1
changelog:
  - #121168
  - Update to 1.58.
  - Require perl(:MODULE_COMPAT_*).
  - Handle ParserDetails.ini parser registration.
  - BuildRequires libxml2-devel.
  - Own installed directories.


author: Mike A. Harris <mharris@redhat.com> 2.4.0-3
changelog:
  - Added "Requires: libGL-devel libGLU-devel" to fix bug (#179464)
  - Change file based GL header build dep to BuildRequires: libGL-devel


author: Mike A. Harris <mharris@redhat.com> 2.4.0-1
changelog:
  - Updated to freeglut-2.4.0
  - Removed unneeded patches:
    - freeglut-2.2.0-gcc4-fix-invalid-lvalue-in-assignment-cvsps-392-393.patch
  - Use "-p /sbin/ldconfig" in post/postun scripts instead of a separate script.


author: Mike A. Harris <mharris@redhat.com> 2.2.0-16
changelog:
  - Added freeglut-2.2.0-gcc4-fix-invalid-lvalue-in-assignment-cvsps-392-393.patch
    to fix "invalid lvalue in assignment" bugs reported by gcc 4
  - Added "-Wall" to CFLAGS in specfile.


author: Mike A. Harris <mharris@redhat.com> 2.2.0-11
changelog:
  - Updated "Obsoletes: glut" to be "Obsoletes: glut <= 3.7" and
    "Obsoletes: glut-devel" to be "Obsoletes: glut-devel <= 3.7" as per
    suggestion from Matthias Saou in comment #14 of bug (#107228)


author: Mike A. Harris <mharris@redhat.com> 2.2.0-10
changelog:
  - Initial Red Hat packaging created by taking the ATrpms src.rpm package from
    http://tinyurl.com/2goog as suggested in bugzilla bug (#107228)
  - Bumped the Release field to "10" so our package is newer when people
    upgrade to it, as requested in bug (#107228)
  - Removed redundant version/release macros from top of specfile
  - Versioned buildroot directory
  - Add --enable-warnings arg to ./configure script
  - Add HTML documentation to main package
  - Made "glut" virtual provides be "glut = 3.7"
  - Do not include *.la files


author: Mike A. Harris <mharris@www.linux.org.uk> 1.3-0.20020125.2
changelog:
  - Oddly, when I build this on my workstation, it only builds static libs, but
    when I build it in the buildsystem it builds shared and static libs.  Must
    be a twilight zone thing going on.  Add shared libs to file lists.


author: Mike A. Harris <mharris@www.linux.org.uk> 1.3-0.20020125.1
changelog:
  - Added -L/usr/X11R6/lib configure script invocation and CFLAGS so lib64
    is treated properly on x86_64/ppc64/s390x architectures


author: Thomas Woerner <twoerner@redhat.com> 4.62-3.el5
changelog:
  - fixed buildroot for package review
  - dropped CVS from config.samples
  - fixed permissions of spec and tar files


author: David Woodhouse <dwmw2@redhat.com> 4.62-2
changelog:
  - Bump release to work around the fact that 'make tag' _still_ doesn't
    make sure that the common directory is up to date, just like it didn't
    half an hour ago.


author: Adrian Havill <havill@redhat.com> 2.00.0-17
changelog:
  - fix error handling for the case when you attempt to "goto" a dir
    that doesn't exist. (#103902)
  - updated URL in spec file


author: Adrian Havill <havill@redhat.com> 2.00.0-14
changelog:
  - removed static buffers that limit multi-file zmodem functionality (#98654)
  - removed assertions from above patch, massage out conflicts with rh patch


author: Mike A. Harris <mharris@redhat.com> 2.00.0-9
changelog:
  - Added find_lang macro andlang files to package, also avoiding 
    _unpackaged_files_terminate_build
  - Added with_desktop_menu_entry macro to disable minicom.desktop by default


author: Mike A. Harris <mharris@redhat.com> 2.00.0-1
changelog:
  - Updated to version 2.00.0-0, which now uses GNU autoconf for everything,
    to ease portability and internationalization issues.  Hold on for the
    ride, as there's bound to be some bumps on the way.  ;o)  On the up side,
    the packaging is likely to be MUCH more maintainable in the future, which
    is very nice to see.
  - Disabled most patches as they are either included now, not needed, or
    it has yet to be determined.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - rebuild against unzigged lockdev-1.0.0-11 (#51577).
  - add BuildPrereq: on lockdev-devel, not /usr/include/baudboy.h.


author: Mike A. Harris <mharris@redhat.com> 1.83.1-12
changelog:
  - Added minicom-1.83.1-disable-message.patch to disable warning message and
    delay when running minicom as root since root-only is the only supported
    method of running minicom now due to security issues.


author: Mike A. Harris <mharris@redhat.com> 1.83.1-8
changelog:
  - Changed minicom to disable SGID/SUID operation completely as it was
    never designed to be secure, and likely never will be. (#35613)
  - Updated the format string patch I made to fix more format string abuses.
  - Added Czeck cs_CZ locale translations.


author: Mike A. Harris <mharris@redhat.com>
changelog:
  - Fixed format string vuln in usage of do_log()  (bug #35613)
  - Fixed misc other format string abuse with werror().
  - Changed main tarball to bzip2 compression
  - Corrected Buildroot to use _tmppath


author: Bob Relyea <rrelyea@redhat.com> - 1.2.1-1
changelog:
  - Pick up ccid 1.2.1
  - use pcscd 'hotplug' feature instead of restarting the daemon
  - add enable_udev


author: Petr Machata <pmachata@redhat.com> - 2010e-1.el5
changelog:
  - Upstream 2010d
    - The DST change in Bangladesh takes place a minute earlier
    - Fiji to end DST on 2010-03-28 at 03:00, about a month earlier
    - Samoa to observe DST this year; they didn't observe DST last year
    - DST in Chile extended to 3 April
    - Resolves: #571538
  - Upstream 2010e:
    - Fix a typo in Bangladesh DST rule


author: Petr Machata <pmachata@redhat.com> - 2010c-1.el5
changelog:
  - Upstream 2010a
    - Source code cleanups
  - Upstream 2010b
    - Northern Mexico's border cities share the DST schedule with the
      United States
  - Upstream 2010c
    - Paraguay DST now in effect from 2nd Sunday of April to 1st Sunday
      of October
  - Resolves: #568667


author: Petr Machata <pmachata@redhat.com> - 2009u-1.el5
changelog:
  - Upstream 2009p
    - Argentina does not enter DST on October 18
    - San Luis switched from UTC-4 to UTC-3 on October 11th
  - Upstream 2009q
    - Change DST end in Syria from November 1 to last Friday in October
    - Changes to past Hong Kong transitions
    - Kemerovo oblast' in Russia will change current time zone on March 28, 2010.
      Asia/Novokuznetsk is the new time zone name
  - Upstream 2009r
    - Changes to local times of three Australian research stations in Antarctica
  - Upstream 2009s
    - Fiji plans to re-introduce DST from November 29th 2009 to April 25th 2010
  - Upstream 2009u
    - Bangladesh changed their clock back to Standard Time on December 31, 2009
    - Resolves: #550570
  - Dropped tzdata-2009o-argentinas.patch


author: Petr Machata <pmachata@redhat.com> - 2009o-2.el5
changelog:
  - San Luis (Argentina) entered DST on October 11 (tzdata-2009o-argentinas.patch)
  - Resolves: #529427


author: Petr Machata <pmachata@redhat.com> - 2009o-1.el5
changelog:
  - Upstream 2009o
    - Bangladesh won't go back to Standard Time from October 1, 2009
    - Pakistan leaves DST on October 1, 2009
  - Dropped tzdata-2009m-karachi.patch
  - Argentina does not enter DST on October 18 (tzdata-2009o-argentinas.patch)
  - Resolves: #529427


author: Petr Machata <pmachata@redhat.com> - 2009m-1.el5
changelog:
  - Upstream 2009m
    - Palestine will will revert back to winter time on Friday, 2009-09-04
    - Samoa passed the DST Bill that fixes DST dates for 2009 and 2010
  - Drop Egypt patch
  - Add markers for autoupdate of spec file
  - Pakistan leaves the period of DST on October 1
  - Resolves: #524198


author: Petr Machata <pmachata@redhat.com> - 2009k-1.el5
changelog:
  - Upstream 2009j
    - DST switch for Bangladesh will occur an hour earlier than was
      thought (we can drop Bangladesh patch).
  - Upstream 2009k
    - Mauritius will not continue to observe DST the coming summer
    - Arbitrarily end DST at the end of 2009 so that a POSIX-style time
      zone string can appear in the Dhaka binary file
  - Egypt starts winter time on August 21.
  - Resolves: #517009


author: Petr Machata <pmachata@redhat.com> - 2009i-2.el5
changelog:
  - Official announcement is for the Bangladesh change to occur at 23:00
    of local time, not 24:00.  Add upstream patch implementing the same.
  - Resolves: #503832


author: Petr Machata <pmachata@redhat.com> - 2009i-1.el5
changelog:
  - Upstream 2009i
    - Bangladesh introduces DST 2009-06-20
  - Upstream 2009h
    - Convert use of 00:00 stamps to 24:00 of the previous day
    - Clarify that the data is Public Domain
  - Drop Cairo patch
  - Resolves: #503832


author: Petr Machata <pmachata@redhat.com> - 2009f-1.el5
changelog:
  - Upstream 2009a
    - Fix Asia/Kathmandu spelling
    - Historical timestamps for Switzerland and Cuba
    - DST update for America/Resolute
  - Upstream 2009d
    - Morocco will observe DST from 2009-06-01 00:00 to 2009-08-21 00:00
    - Tunisia will not observe DST this year.
    - Syria will start DST on 2009-03-27 00:00 this year
    - Cuba will start DST on midnight between 2009-03-07 and 2009-03-08
    - Province of San Luis, Argentina, went to UTC-04:00 on 2009-03-15
  - Upstream 2009e
    - Historical changes for Jordan
    - Palestine will start DST on 2009-03-26 and end 2009-09-27
  - Upstream 2009f
    - Pakistan will observe DST between 2009-04-15 and (probably) 2009-11-01
  - Resolves: #495470
  - Egypt ends DST on 2009-09-24
  - Resolves: #492263


author: Petr Machata <pmachata@redhat.com> - 2008i-1.el5
changelog:
  - Upstream 2008g
    - Fixed future DST transitions for Brazil
  - Upstream 2008h
    - Fix exact DST transition hour for Mauritius
    - Syria will leave the period of DST on Nov 1
    - Fix coordinates of Pacific/Niue
  - Upstream 2008i
    - Updates for Argentina: Drop DST in zones America/Argentina/Jujuy,
      La_Rioja, San_Juan, Catamarca, Mendoza, Rio_Gallegos, Ushuaia; new
      zone America/Argentina/Salta (for provinces SA, LP, NQ, RN).
  - Resolves: #467188


author: Petr Machata <pmachata@redhat.com> - 2008f-1
changelog:
  - Upstream 2008f
    - Gaza strip runs on different clocks during Ramadan
    - Argentina and Brazil will start DST on Sunday October 19, 2008
  - Drop Pakistan & Morocco patches
  - Resolves: #462707


author: Petr Machata <pmachata@redhat.com> - 2008e-1
changelog:
  - Upstream 2008c
    - Mongolia changes zone
    - Pakistan DST is scheduled until Sep/1, instead of Aug/31
  - Upstream 2008d
    - Changes for Brazil and Mauritius
  - Upstream 2008e
    - Changes for Mauritius
    - Leap second coverage for 31/Dec 2008
    - Corrections of historical dates
  - Drop Morocco and Pakistan patches that are superseded by upstream
  - Pakistan DST is scheduled until Oct/31
  - Morocco DST is scheduled until Aug/31
  - Resolves: #460059 #460365 #452679


author: Petr Machata <pmachata@redhat.com> - 2008b-2
changelog:
  - Upstream 2008b
    - DST changes for Syria, Cuba; Iraq abandons DST
    - Saigon zone renamed Ho_Chi_Minh; backward link provided
    - Add America/Argentina/San_Luis information
  - Pakistan introduces DST
  - Resolves: #447270


author: Petr Machata <pmachata@redhat.com> - 2007j-1
changelog:
  - Upstream 2007j
    - New links America/St_Barthelemy and America/Marigot
    - Venezuela is changing their clocks on December 9 at 03:00
  - Upstream 2007i
    - Syria DST will take place at Midnight between Thursday and Friday.
    - Cuba will end DST on the last Sunday of October.
  - Update tst-timezone.c from glibc CVS
  - Resolves: #410101


author: Petr Machata <pmachata@redhat.com> - 2007h-1
changelog:
  - Upstream 2007h
    - Brazil will observe DST from 2007-10-14 to 2008-02-17
    - Egypt and Gaza switched earlier than we expected
    - Iran will resume DST next year
    - Venezuela is scheduled to change TZ to -4:30 on January 1
  - Resolves: #296801
  - Resolves: #266861


author: Petr Machata <pmachata@redhat.com> - 2007g-1
changelog:
  - Upstream 2007g
    - Egypt switches the September 7, not September 28
    - Daviess, Dubous, Knox, Martin, and Pike Counties, Indiana, switch
      from central to eastern time in November
    - South Australia, Tasmania, Victoria, and New South Wales are
      changing their DST rules effective next year
    - Several Antarctic station's rules weren't properly updated to account
      for this year's change to the New Zealand daylight saving rules
  - Venezuela timezone changes from -4:00 to -4:30 at 24 September
  - Resolves: #296801
  - Resolves: #266861


author: Petr Machata <pmachata@redhat.com> - 2007f-1
changelog:
  - Upstream 2007f
    - New Zealand is extending DST, starting later this year.
    - Haiti no longer observes DST.
    - The Turks and Caicos switch at 02:00, not at 00:00, and have
      adopted US DST rules.
  - Upstream 2007e
    - Syria switched to summer time at Mar/29.
    - Honduras will not enter DST this year.
  - Resolves: #240786


author: Petr Machata <pmachata@redhat.com> - 2007d-1
changelog:
  - Upstream 2007d
    - Mongolia has abolished DST.
    - Turkey will use EU rules this year, changing at 01:00 UTC rather
      than 01:00 standard time.
    - Cuba observed DST starting Sunday.
    - Resolute, Nunavut switched from Central to Eastern time last
      November.


author: Petr Machata <pmachata@redhat.com> - 2007c-1
changelog:
  - Upstream 2007c
    - Pulaski County, Indiana, switched back to eastern time.
    - Turkey switches at 01:00 standard time, not at 01:00 UTC.
  - Upstream 2007b
    - Changes to the commentary in "leapseconds".
  - Resolves: #230089


author: Petr Machata <pmachata@redhat.com> - 2007a-1
changelog:
  - Upstream 2007a:
    - Cuba has ended its three years of permanent DST.
    - Western Australia DST trial changes
    - Updates to Bahamas, they will be in sync with 2007 US DST change
  - Resolves: #228732


author: Petr Machata <pmachata@redhat.com> - 2006m-2
changelog:
  - Proposed upstream patch (#210058)
    - Jordan will switch to winter time on October 27, not September 29
    - Brazil's DST this year is the first Sunday in November to the last
      Sunday in February.  (Thanks to Frederico A. C. Neves.)
    - ISO 3166 codes for Serbia and Montenegro, zone Europe/Podgorica
    - Commentary and past timestamps changes


author: Petr Machata <pmachata@redhat.com> - 2006m-1
changelog:
  - Upstream 2006m:
    - Adjustments for Egypt, Palestine, Uruguay
    - Better description of `until' field in zic (8) manpage


author: Petr Machata <pmachata@redhat.com> - 2006l-1
changelog:
  - Upstream 2006k, 2006l:
    - Adjustments for Egypt, Palestine, Cuba, Honduras
    - Documentation changes


author: Petr Machata <pmachata@redhat.com> - 2006j-1
changelog:
  - Upstream 2006j
    - Honduras stopped observing DST on Monday at 00:00
    - America/Bermuda will follow the US's lead next year
    - America/Moncton will use US-style rules next year
    - New Zone America/Blanc-Sablon, for Canadians who observe AST all
      year
    - New zone: America/Atikokan instead of America/Coral_Harbour
    - New zones: Europe/Jersey, Europe/Guernsey, Europe/Isle_of_Man
    - Historical changes
    - Commentary updates
  - Upstream 2006i
    - localtime.c fixes
  - Upstream 2006h
    - zic leapsecond fix


author: Petr Machata <pmachata@redhat.com> - 2006f-1
changelog:
  - Upstream 2006f
    - America/Guatemala observes DST between Apr/30 and Oct/1
    - Historical changes for Nicaragua
    - Update of America/Indiana/Vincennes in zone table


author: Petr Machata <pmachata@redhat.com> - 2006d-1
changelog:
  - Upstream 2006d
    - Haiti observes DST
    - Sri Lanka change actually took effect Apr/15
    - All Canada is now scheduled for 2007 US DST rules
    - Some historical fixes


author: Petr Machata <pmachata@redhat.com> - 2006c-1
changelog:
  - Upstream 2006c
    - Time-related changes:
      - dozens of historical and commentary changes
      - Iran stopped observing DST
      - Sri Lanka switches from UTC+6 to UTC+5:30
      - America/Thule and America/Edmonton will adopt new US rules,
        starting 2007
      - Tunisia is adopting regular DST
    - Code:
      - asctime.c: Chages in format strings to silent gcc warnings
      - removing K&R notation from function signatures
      - few fixes across the code


author: Petr Machata <pmachata@redhat.com> 2006b-1
changelog:
  - Upstream 2006b:
    - using tz64code version, as 32 is legacy according to tzdata ML
    - new manual pages for ctime, strftime, tzset
    - some source code reorganizations
    - no timezone/dst rule updates


author: Petr Machata <pmachata@redhat.com> 2006a-1
changelog:
  - Upstream 2006a:
    - private.h(scheck): changing char* to char const*
    - Rule changes for Palestine, zone changes for Indiana/US, both
      changes for Canada.
    - Many related doc changes.
  - Naming scheme in spec file doesn't use %{name}, but tzdata.


author: Petr Machata <pmachata@redhat.com> 2005r-3
changelog:
  - 2005r-3
    - Meta changes.  Renaming tzdata.tar.bz2 file to tzdata$ver-base,
      so that it won't clash across updates.


author: Petr Machata <pmachata@redhat.com> 2005r-2
changelog:
  - 2005r
    - Zones EST, MST, HST, EST5EDT, CST6CDT, MST7MDT, PST8PDT moved to
      northamerica to guard against old files with obsolete information
      being left in the time zone binary directory.
    - Changes for countries that are supposed to join 2007 US DST
      change.  This includes most of Canada, however entries already in
      the database (Alberta, British Columbia, Newfoundland, Northwest
      Territories, and Yukon) were left alone for the time being.
    - Fixes in zdump.c (abbrok): conditions are chained, and the string
      is checked for emptiness.


author: Jakub Jelinek <jakub@redhat.com> 2005q-2
changelog:
  - 2005q
    - changes for Georgia, Azerbaijan, Jordan, Palestine, Cuba, Nicaragua
    - SystemV timezone changes


author: Jakub Jelinek <jakub@redhat.com> 2005n-2
changelog:
  - 2005n
    - changes for Kyrgyzstan and Uruguay
  - fix a typo in the Makefile (used TZDATA env var instead of TZDIR during
    make check), update tst-timezone.c from glibc CVS (#172102)


author: Jakub Jelinek <jakub@redhat.com> 2005m-2
changelog:
  - 2005m
    - changes for USA (extending DST by 4 weeks since 2007), Tunisia,
      Australia, Kazakhstan
    - historical timezone data changes for Japan, Poland, Northern Ireland and
      Mali
    - timezone name change for East Timor


author: Jakub Jelinek <jakub@redhat.com> 2005g-2
changelog:
  - 2005g
    - fixes for Uruguay
  - include README and Theory from tzcode tarball in /usr/share/doc;
    Theory includes a good summary of how the timezone data files
    are supposed to be named


author: Paul Nasrat <pauln@truemesh.com> - 0:0.12.3-0.fdr.1
changelog:
  - Revert to imakefile and XFree86-sdk
  - Include missing sdk headers - push upstream
  - don't build synclient and syndaemon for now


author: Mike A. Harris <mharris@redhat.com> 1.0.1-3
changelog:
  - Add BuildRequires on autoconf/automake for brew.
  - Use "make install DESTDIR=..." instead of makeinstall macro.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-1
changelog:
  - Updated all tarballs to version 1.0.0 from X11R7 RC4.
  - Changed manpage dir from man1x to man1 to match RC4 default.


author: Mike A. Harris <mharris@redhat.com> 0.99.1-2
changelog:
  - Add "Obsoletes: XFree86, xorg-x11", as these utils used to be there in
    in monolithic X packaging.


author: Mike A. Harris <mharris@redhat.com> 0.99.1-1
changelog:
  - Initial build of xfwp, proxymngr, xfindproxy from X11R7 RC2.
  - Added "BuildRequires: lbxproxy" for proxymngr.


author: Mike A. Harris <mharris@redhat.com> 0.5.0.4-1
changelog:
  - Updated xorg-x11-drv-ark to version 0.5.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 0.5.0-1
changelog:
  - Set "ExclusiveArch: i386 i486 i586 i686 pentium3 pentium4 athlon" to limit drivers to what is sensible on each
    architecture.
  - Update BuildRoot to use Fedora Packaging Guidelines


author: Zack Cerza <zcerza@redhat.com> - 0.5.4-1
changelog:
  - Remove all Requires
  - Add package versions to this changelog
  - Add new description
  - Use official Fedora Extras BuildRoot
  - Change the group to Development/Languages


author: Nalin Dahyabhai <nalin@redhat.com> - 1.1.33-9
changelog:
  - add /usr/sbin/useradd as a prereq for the -sendfax subpackage, because
    we call it during the -sendfax %pre scriptlet (#203266)


author: Jason Vas Dias <jvdias@redhat.com> 1.1.33-3_FC5
changelog:
  - fix bug 162174: prevent uninterruptable hang on exit() when
                    direct line disconnected (kernel bug 164002)
  		  do tcflush(1,TCOFLUSH) before exit() in sig_goodbye()
  	  	  block signals before entering syslog()
    workaround build system 'buffer overflow checks' bug:
                    use memcpy instead of sprintf in record.c, line 53


author: Jason Vas Dias <jvdias@redhat.com> 1.1.31-2
changelog:
  - Fixed bug: 115261 - let faxspool work if acroread isn't installed
  - or gs can't understand its level3 output .


author: Nalin Dahyabhai <nalin@redhat.com> 1.1.28-7
changelog:
  - rotate mgetty.log.unknown and mgetty.log.callback (#68049)
  - don't logrotate already-rotated logs (#68422)


author: Nalin Dahyabhai <nalin@redhat.com> 1.1.28-3
changelog:
  - rotate the mgetty and vgetty logs by default, specifying them with
    wildcards in the logrotate configs (#62159)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 1.1.26
  - add logrotate.vm and logrotate.vgetty (note from Heiner Kordewiner)
  - add voice/{Announce,Changelog,Readme} to documentation set


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - change the default group in the vgetty configuration file from phone to uucp,
    which matches the settings for faxes


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 1.1.25
  - ditch the elsa patch in favor of the current vgetty patch
  - don't need to strip binaries, buildroot policies do that
  - add docs to the voice subpackage


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - back out quoting patch
  - change Copyright: distributable to License: GPL
  - add URL
  - remove logging changes from excl patch, based on input from Gert
  - rework ia64 patch, break out gets/fgets change based on input from Gert


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - make sure all scripts quote variables where possible (#17179)
  - make sure all scripts use mktemp for generating temporary files


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - forcibly strip binaries (#12431)
  - change dependency on libgr-progs (which is gone) to netgr-progs (#10819)
  - change dependency on giftoppm to giftopnm (#8088)
  - attempt to plug some potential security problems (#11874)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - Overhaul for FHS fixes.
  - Stop removing logs in postun.
  - Stop stripping everything.
  - ia64 fixes.


author: Jos Vos <jos@xos.nl>
changelog:
  - Use a patch for creating policy.h using policy.h-dist.
  - Add viewfax subpackage (X11 fax viewing program).
  - Add logrotate config files for mgetty and sendfax log files.
  - Properly define ECHO in Makefile for use with bash.
  - Add optional use of dialin.config (for modems supporting this).
  - Change default notification address to "root" (was "faxadmin").
  - Change log file names according to better defaults.
  - Change default notify program to /etc/mgetty+sendfax/new_fax (was
    /usr/local/bin/new_fax).


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - add faxrunqd man page (problem #850)
  - add missing pbm2g3 (and man page); remove unnecessary "rm -f pbmtog3"
  - delete redundant ( cd tools; make ... )


author: Peter Vrabec <pvrabec@redhat.com> 1.07-10
changelog:
  - revert fix from 1.07-9
  - fix truncation of values on 32b platforms where statvfs64
    is being called on a large file system (#153259)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - build against lockdev-1.0.0-14, with
  -   swap egid and gid for lockdev's access(2) device check (#52029).
  - add (noreplace) to all config files.


author: Jeff Johnson <jbj@redhta.com>
changelog:
  - move per-system lock to 755 uucp.uucp /var/lock/uucp directory.
  - use baudboy.h to create per-device lock(s) in /var/lock.
  - comment out compress/strip, rely on rpm brp-* scripts.
  - check uuxqt arguments more carefully.


author: Florian La Roche <Florian.LaRoche@redhat.com>
changelog:
  - change perms to be root:root for the config files and
    0640,root:uucp for config files containing passwords
  - add patch from #6151 (division by zero, SIGFPE)
  - make %post work also for simple sh-versions


author: Erik Troan <ewt@redhat.com>
changelog:
  - Brian Candler fixed /usr/lib/uucp/uucico symlink
  - Added "create" entries to log file rotation configuration
  - Touch log files on install if they don't already exist to allow proper
    rotation


author: Erik Troan <ewt@redhat.com>
changelog:
  - symlinked /usr/sbin//uucico into /usr/lib/uucp
  - (all of these changes are from Brian Candler <B.Candler@pobox.com>)
  - sgid bit added on uucico so it can create lock files
  - log files moved to /var/log/uucp/ owned by uucp (so uucico can create them)
  - log rotation added
  - uses /etc/uucp/oldconfig instead of /usr/lib/uucp for old config files
  - package creates /etc/uucp and /etc/uucp/oldconfig directories
  - man pages reference the correct locations for spool and config files


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - remove '-g %{RADVD_GID}' when creating the user, which may be problematic
    if the user didn't exist before.


author: Bernhard Rosenkraenzer <bero@redhat.com> 0.7.1-1
changelog:
  - 0.7.1 (bugfix release, #61023), fixes:
    - Check that forwarding is enabled when starting radvd
      (helps avoid odd problems) 
    - Check configuration file permissions (note: in setuid operation, must not
      be writable by the user.group) 
    - Cleanups and enhancements for radvdump
    - Ensure NULL-termination with strncpy even with overlong strings
      (non-criticals, but better safe than sorry) 
    - Update config.{guess,sub} to cope with some newer architectures 
    - Minor fixes and cleanups


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - License unfortunately is BSD *with* advertising clause, so to be pedantic,
    change License: to 'BSD-style'.


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - update to 0.62pl1.  Bye bye patches!
  - Require: initscripts (should really be with a version providing IPv6)
  - clean up the init script, make condrestart work properly
  - Use a static /etc/rc.d/init.d; init.d/radvd required it anyway.


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - add patch to chroot (doesn't work well yet, as /proc is used directly)
  - clean up droproot patch, drop the rights earlier; require user-writable
  pidfile directory
  - set up the pidfile directory at compile time.


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - add select/kill signals patch from Nathan Lutchansky <lutchann@litech.org>.
  - add address syntax checked fix from Marko Myllynen <myllynen@lut.fi>.
  - add patch to check the pid file before fork.
  - add support for OPTIONS sourced from /etc/sysconfig/radvd, provide a nice
  default one.
  - add/delete radvd user, change the pidfile to /var/run/radvd/radvd.pid.
  - fix initscript NETWORKING_IPV6 check.


author: Tim Powers <timp@redhat.com>
changelog:
  - applied patch supplied by Pekka Savola in #30508
  - made changes to initscript as per Pekka's suggestions


author: Tim Powers <timp@redhat.com>
changelog:
  - use %configure and %makeinstall, just glob the manpages, cleans
    things up
  - fixed initscript so that it can be internationalized in the future


author: Pekka Savola <pekkas@netcore.fi>
changelog:
  - Create a single package(source) for glibc21 and glibc22 (automatic
  Requires can handle this just fine).
  - use %{_mandir} and friends
  - add more flesh to %doc
  - streamline %config file %attrs
  - streamline init.d file a bit:
     * add a default chkconfig: (default to disable for security etc. reasons; 
       also, the default config isn't generic enough..)
     * add reload/condrestart
     * minor tweaks
     * missing: localization support (initscripts-5.60)
  - use %initdir macro


author: Miroslav Lichvar <mlichvar@redhat.com> - 5:1.8.0-5
changelog:
  - remove dependency on slib, provide support through triggers
  - fix multilib -devel conflicts in guile-snarf and scmconfig.h (#192684)


author: Miroslav Lichvar <mlichvar@redhat.com> - 5:1.8.0-3
changelog:
  - don't package .la files and static libraries (#191595)
  - move module .so files from devel to main package


author: Miroslav Lichvar <mlichvar@redhat.com> - 5:1.8.0-1
changelog:
  - update to guile-1.8.0
  - fix slib.scm for slib-3a3
  - install guile-tut info
  - move guile.m4 to devel package
  - spec cleanup


author: Phil Knirsch <pknirsch@redhat.com> 5:1.6.7-2
changelog:
  - bump release and rebuild with gcc 4
  - Fixed problem with ltdl and gcc 4 rebuild
  - Add BuildPreReq for libtool-ltdl-devel


author: Phil Knirsch <pknirsch@redhat.com> 5:1.6.4-16
changelog:
  - Moved info files to base package as they are not devel related (#139948)
  - Moved static guilereadline and guile-srfi-srfi libs to devel package (#140893)
  - Fixed guile-tools not finding guile lib dir (#142642)
  - Added some nice tools (#142642)
  - Removed smp build, seems to be broken atm


author: Phil Knirsch <pknirsch@redhat.com> 1.6.0-1
changelog:
  - Make it build on x86_64.
  - Integrated and fixed Than's update to 1.6.0.
  - Fixed some things in the %files section.


author: Than Ngo <timp@redhat.com> 1.4.1-2
changelog:
  - fix to build on s390*/x86_64 -> include libguilereadline.so
  - fix to link libltdl
  - don't use rpath


author: Philipp Knirsch <Philipp.Knirsch@redhat.de>
changelog:
  - Fixed %files bug #20134 where the /usr/lib/libguilereadline.so didn't get
    installed for the non devel version.


author: Todd Larason <jtl@molehill.org>
changelog:
  - guile-devel does depend on guile
  - remove devel dependancy on m4
  - move guile-snarf from guile to guile-devel
  - Converted to rhcn


author: Tomasz Koczko <kloczek@idk.com.pl> (1.2-3)
changelog:
  - added %attr(-, root, root) for %doc, 
  - in %post, %postun ldconfig runed as parameter "-p",
  - removed /bin/sh from requires,
  - added %description,
  - changes in %files.


author: Tomasz Koczko <kloczek@rudy.mif.pg.gda.pl> (1.2-2)
changelog:
  - all rewrited for using Buildroot,
  - added %postun,
  - removed making buid logs,
  - removed "--inclededir", added "--enable-dynamic-linking" to configure
    parameters,
  - added striping shared libs and /usr/bin/guile,
  - added "Requires: /bin/sh" (for guile-snarf) in guile package and
    "Requires: m4" for guile-devel,
  - added macro 1.8.0 in "Source:" and %files,
  - added %attr macros in %files.


author: Steve Conklin <sconklin@redhat.com> - 0.13.1-3
changelog:
  - Added spec file changes to not save old scripts when patching
  - Changed permissions on source files to meet release criteria
  Related: rhbz#252332


author: Steve Conklin <sconklin AT redhat DOT com> - 0.13.1-1
changelog:
  - Rebased to upstream 0.13.1
  - This incorporates all previous Red Hat patches except the context buffer size change and dos line end removal
  Resolves: rhbz#252332


author: James Antill <jantill@redhat.com> - 0.12-1
changelog:
  - Moved to upstream 0.12 final.
  - More fixes for nomhash/etc.
  - Merged Steve's dbnames patch.
  - Merged Steve's memleak+perf patch.


author: James Antill <jantill@redhat.com> - 0.12_rc1-6
changelog:
  - Add LSPP audit watch rules to default config. file 
  - Remove /var/log/sa from default config. file, due to add/rm files daily.
  - Integrate audit patch from steve.


author: James Antill <jantill@redhat.com> - 0.12_rc1-3
changelog:
  - Move to latest upstream.
  - Massive amount of warning fixes.
  - Add acl/selinux/xattr support.
  - Add SHA256, SHA512, WHIRLPOOL hashes support.
  - Non-trivial DB/infrastructure changes for the above.


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 0.11-1
changelog:
  - Update to 0.11 release.
  - useless-includes patch merged upstream.
  - old Russian man pages not available anymore.
  - disable static linking.


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 0:0.10-0.fdr.1
changelog:
  - Update to 0.10 release.
  - memleaks patch merged upstream.
  - rootpath patch merged upstream.
  - fstat patch not needed anymore.
  - Updated URL.


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 0:0.10-0.fdr.0.1.cvs20031104
changelog:
  - Only tar.gz available upstream.
  - byacc not needed when bison -y is available.
  - Installed Russian manual pages.
  - Updated with changes from CVS (2003-11-04).
  - getopt patch merged upstream.
  - bison-1.35 patch incorporated upstream.


author: Johnny Hughes <johnny@centos.org> 13-1.el5.centos
changelog:
  - Modified to remove Red Hat branding from the SPEC file.
  - Modified to remove Red Hat branding from the Summaries and Descritpions
    using patch specspo-13-1.el5.centos.patch


author: Owen Taylor <otaylor@redhat.com> 2.7.1-3
changelog:
  - Update to real 2.7.1 tarball
  - Remove --enable-gtk-doc again
  - Add build requires for gtk-doc and gnome-icon-theme (#124935,
    Maxim Dzumanenko)


author: Colin Walters <walters@redhat.com> 2.7.0-1
changelog:
  - Update to 2.7.0 CVS
  - Pass --enable-gtk-doc to configure
  - Add current version of patch which handles dynamic updating
    from libgnomeprint.
  - Bump required libgnomeprint version.


author: Nalin Dahyabhai <nalin@redhat.com> 1.1.7-7
changelog:
  - remove a stray quote from configure.in that was causing a syntax error
    and breaking recompiles (upstream #1422089)


author: Nalin Dahyabhai <nalin@redhat.com> 1.1.6-6
changelog:
  - rebuild
  - install into /%{_lib}/security instead of /lib/security, so that we put the
    module in the right place on multilib systems


author: Miloslav Trmač <mitr@redhat.com> - 0.16-6.el5.4
changelog:
  - Drop the Python lock around operations that can block for a long time.
    Resolves: #472690
  - Only send the "selector" part of URL in requests sent over a proxy.  Patch by
    James Bowes <jbowes@redhat.com>.
    Resolves: #491674
  - Explicitly close sockets underlying https connections.
    Resolves: #460692


author: Miloslav Trmač <mitr@redhat.com> - 0.16-6.el5.2
changelog:
  - Send the Host: header when using a HTTP/1.1 proxy for https (patch by Karl
    Grindley)
    Resolves: #239034
  - Backport support of multiple CN values and multiple patterns in subjectAltName
    from m2crypto-0.18
    Resolves: #363591


author: Miloslav Trmac <mitr@redhat.com> - 0.16-6
changelog:
  - Add support for SSL socket timeouts (based on a patch by James Bowes
    <jbowes@redhat.com>)
    Resolves: #219966


author: Miloslav Trmac <mitr@redhat.com> - 0.16-5
changelog:
  - Backport the urllib2 wrapper (code by James Bowes <jbowes@redhat.com>)
    Resolves: #210956
  - Add proxy support for https using CONNECT (original patch by James Bowes
    <jbowes@redhat.com>)
    Resolves: #210963


author: Miloslav Trmac <mitr@redhat.com> - 0.16-4
changelog:
  - Drop Obsoletes: openssl-python, openssl-python was last shipped in RHL 7.1
  - Fix interpreter paths in demos


author: Miloslav Trmac <mitr@redhat.com> - 0.13-3
changelog:
  - Fix invalid Python version comparisons in M2Crypto.httpslib (#156979)
  - Don't ship obsolete xmlrpclib.py.patch
  - Clean up the build process a bit


author: Nalin Dahyabhai <nalin@redhat.com> 0.09-1
changelog:
  - Update to version 0.09
  - Build using bundled copy of SWIG
  - Pick up additional CFLAGS and LDFLAGS from OpenSSL's pkgconfig data, if
    there is any
  - Handle const changes in new OpenSSL
  - Remove unnecessary ldconfig calls in post/postun


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-evdev to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for evdev input driver generated automatically
    by my xorg-driverspecgen script.


author: Christopher Aillon <caillon@redhat.com> 0.46-2
changelog:
  - The .pc file should be installed in %{_datadir} instead of %{_libdir}
    since this is a noarch package.  64bit platforms will otherwise look in
    the 64bit version of the %{_libdir} and not find the .pc file and 
    cause them to not find iso-codes


author: Caius Chance <cchance@redhat.com> -0.3.1-11.el5
changelog:
  - Resolves: rhbz#220287 (Last candidate on lookup table is not a valid 
              candidate.)
    <<< Add logic to refit last look-up page.


author: Jens Petersen <petersen@redhat.com> - 0.2.1-5
changelog:
  - build conditionally with libstdc++so7 preview library (#166041)
    - add with_libstdc_preview switch and tweak libtool to link against newer lib
  - update filelist since module dir is now api-versioned


author: Jens Petersen <petersen@redhat.com> - 0.2.1-1
changelog:
  - initial build for Fedora Core
  - version 0.2.1 buildrequires libchewing 0.2.7 or later
  - spec file cleanup


author: Mike A. Harris <mharris@redhat.com> 7.1-1
changelog:
  - Bump the package version to 7.1 to have it match the X11 release that the
    tarballs came from going forward.
  - Update to xrefresh-1.0.2, xtrap-1.0.2 from X11R7.1
  - Remove build dependency on liblbxutil-devel, as LBX is no longer supported.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-1
changelog:
  - Updated all packages to version 1.0.0 from X11R7 RC4
  - Changed manpage dirs from man1x to man1 to match upstream RC4 default.
  - Updated lbxproxy-datadir-AtomControl-fix.patch
  - Updated rgb-1.0.0-datadir-rgbpath-fix.patch
  - Removed xvidtune-0.99.1-datadir-app-defaults-fix.patch, now unneeded.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-4
changelog:
  - Added lbxproxy-0.99.2-datadir-AtomControl-fix.patch to move architecture
    independent data files from libdir to datadir.
  - Added rgb-0.99.2-datadir-rgbpath-fix.patch to move architecture independent
    data files from libdir to datadir.
  - Added xvidtune-0.99.1-datadir-app-defaults-fix.patch to move app-defaults
    into datadir.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-2
changelog:
  - Added "Obsoletes: XFree86, xorg-x11", as these utilities came from there.
  - Rebuild against new libXaw 0.99.2-2, which has fixed DT_SONAME. (#173027)


author: David Malcolm <dmalcolm@redhat.com> - 2.1.4-1
changelog:
  - updated from 1.0.10 to 2.1.3
  - removed evolution-webcal.applications; this was removed in version 2.1.1
  - updated e-d-s requirement from 0.0.91 to 1.1.0


author: Mike A. Harris <mharris@redhat.com> 1.0.1-3
changelog:
  - Made package arch specific due to pkgconfig files being placed in lib64
    if the noarch packages manage to get built on x86_64/ppc64/s390x.


author: Mike A. Harris <mharris@redhat.com> 1.0.1-2
changelog:
  - Cleaned up file manifest.
  - Made package noarch, as it is just header files.
  - Disable debuginfo processing, as there are no ELF objects in package.


author: Mike A. Harris <mharris@redhat.com> 0.99.1-4
changelog:
  - Updated dep to "Requires(pre): xorg-x11-filesystem >= 0.99.2-3" for new fix.
  - Moved bitmap files back into the upstream default of _includedir (#173665).


author: Mike A. Harris <mharris@redhat.com> 1.0.0.5-1
changelog:
  - Updated xorg-x11-drv-penmount to version 1.0.0.5 from X11R7.0
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-penmount to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for penmount input driver generated automatically
    by my xorg-driverspecgen script.


author: Soren Sandmann <sandmann@redhat.com> 7.1-6.fc6
changelog:
  - Don't install xprint headers, as they are being moved to the libXp 
    package instead. Bug 175350.


author: Mike A. Harris <mharris@redhat.com> 7.1-5.fc6
changelog:
  - Don't install LBX protocol headers, as LBX is obsoleted in the 7.1 release
    and no longer supported.


author: Kristian Høgsberg <krh@redhat.com> 7.0-2
changelog:
  - Add glproto-texture-from-drawable.patch to add opcodes and tokens
    for GLX_texture_from_drawable extension.


author: Mike A. Harris <mharris@redhat.com> 7.0-1
changelog:
  - Update to damageproto-1.0.3, glproto-1.4.3, xf86driproto-2.0.2 from the
    X11R7.0 final release.
  - Bump package version to 7.0 to match the X11R7 version, for no particularly
    strong reason other than "it feels good".


author: Mike A. Harris <mharris@redhat.com> 0.99.1-2
changelog:
  - This package contains only C header files and pkg-config *.pc files,
    and does not contain any ELF binaries or DSOs, so we disable debuginfo
    generation.


author: Mike A. Harris <mharris@redhat.com> 0.99.1-1
changelog:
  - Update all tarballs to X11R7 RC1 release.
  - Remove panoramixproto, as it is now known as xineramaproto.
  - Remove glu.h and glx.h from file manifest, as they're provided by Mesa.
  - Added {_includedir}/GL/internal/dri_interface.h to file manifest.


author: Mike A. Harris <mharris@redhat.com> 0.0.1-1
changelog:
  - Changed for loop in build section to use "ls -1" instead of find "*proto*"
    when going through protocol dirs, as "evieext" just *HAD* to be named
    something completely different from everything else, in true X.Org
    inconsistency fashion.
  - Added Conflicts with XFree86-devel and xorg-x11-devel.


author: Mike A. Harris <mharris@redhat.com> 0.0.1-0
changelog:
  - Initial build of xproto from X.Org modular CVS checkout and "make dist".
  - Since there are no upstream tarballs yet, and "make dist" generates
    a "7.0" non-beta final version, I changed the version to 0.0 as I've no
    idea what the intention is and want to avoid using Epoch later.


author: Petr Machata <pmachata@redhat.com> - 2.5.4a-39
changelog:
  - fileno is defined in posix standard, so adding #define _POSIX_SOURCE
    to compile without warnings (#195687)
  - dropping 183098 test, since the original bug was already resolved


author: Petr Machata <pmachata@redhat.com> - 2.5.4a-38
changelog:
  - Caught the real cause of #183098.  It failed because the parser
    built with `flex -f' *sometimes* made it into the final package, and
    -f assumes seven-bit tables.  Solution has two steps.  Move `make
    bigcheck' to `%check' part, where it belongs anyway, so that flexes
    built during `make bigcheck' don't overwrite original build.  And
    change makefile so that `make bigcheck' will *always* execute *all*
    check commands.


author: Petr Machata <pmachata@redhat.com> 2.5.4a-36
changelog:
  - Applying Jonathan S. Shapiro's bugfix-fixing patch. More std:: fixes
    and better way to silent warnings under gcc.


author: Petr Machata <pmachata@redhat.com> 2.5.4a-35
changelog:
  - Adding `std::' prefixes, got rid of `using namespace std'. (#115354)
  - Dummy use of `yy_flex_realloc' to silent warnings. (#30943)
  - Adding URL of flex home page to spec (#142675)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix generation of broken code (conflicting isatty() prototype w/ glibc 2.2)
    This broke, among other things, the kdelibs 2.0 build
  - Fix source URL


author: Adrian Havill <havill@redhat.com> 1.0.1-1
changelog:
  - bumped version
  - make the dev rewrite work with ttys in the /dev/input subdir, not just
    the base level dir (#98160)


author: Nalin Dahyabhai <nalin@redhat.com> 1.0.0-16
changelog:
  - include liblockdev.so so that programs can link to a shared liblockdev
  - fix shared library version numbers


author: Bill Nottingham <notting@redhat.com>
changelog:
  - check that we can open the device r/w before locking
  - fix calling lockdev without any arguments
  - fix waitpid() call in baudboy.h
  - use umask(002), not umask(0)


author: Daniel Kopecek <dkopecek@redhat.com> 1.7.2p1-1
changelog:
  - rebase to 1.7.2p1
    Resolves: #469653
    Resolves: #497873
    Resolves: #500942
    Resolves: #512191
    Resolves: #519017
    Resolves: #521778
    Resolves: #521903
  - sudo-1.7.2p1-negation.patch, don't apply negation to an already
    negated Cmnd_Alias member. Backported from upstream development
    version of sudo.
    Resolves: #453045


author: Daniel Kopecek <dkopecek@redhat.com> 1.6.9p17-4
changelog:
  - audit patch rediff (one chunk failed to apply due to fuzz=0)
  - Fix for incorrect handling of groups in Runas_User (#481720)
    Resolves: #481821


author: Peter Vrabec <pvrabec@redhat.com> 1.6.9p17-1
changelog:
  - rebase 1.6.8 -> 1.6.9
  - patches from F10
  - compiled with secure path(80215)
  - patches for sudoers file provided by sudo are removed,
    because we deliver our own sudoers in sources1
  - compiled without selinux support since there was no 
    selinux support in previous release
    Resolves: #447408


author: Peter Vrabec <pvrabec@redhat.com> 1.6.8p12-11
changelog:
  - fix segfaults when using ldap on s390,
    Resolves: #305331
  - add audit support,
    Resolves: #320671


author: Karel Zak <kzak@redhat.com> 1.6.8p12-7
changelog:
  - fix #198755 - make login processes (sudo -i) initialise session keyring
    (thanks for PAM config files to David Howells)
  - add IPv6 support (patch by Milan Zazrivec)


author: Dan Walsh <dwalsh@redhat.com> 1.6.8p12-3
changelog:
  - Remove selinux patch.  It has been decided that the SELinux patch for sudo is
  - no longer necessary.  In tageted policy it had no effect.  In strict/MLS policy
  - We require the person using sudo to execute newrole before using sudo.


author: Karel Zak <kzak@redhat.com> 1.6.8p9-1
changelog:
  - new version 1.6.8p9 (resolve #161116 - CAN-2005-1993 sudo trusted user arbitrary command execution)


author: Colin Walters <walters@redhat.com> 1.6.7p5-24
changelog:
  - Enhance sesh.c to fork/exec children itself, to avoid
    having sudo reap all domains.
  - Only reinstall default signal handlers immediately before
    exec of child with SELinux patch


author: Nalin Dahyabhai <nalin@redhat.com> 1.6.6-2
changelog:
  - remove absolute path names from the PAM configuration, ensuring that the
    right modules get used for whichever arch we're built for
  - don't try to install the FAQ, which isn't there any more


author: Warren Togami <wtogami@redhat.com> 0.11.12-1
changelog:
  - upgrade to 0.11.12
  - remove upstreamed patches (0-2, 5-9)
  - remove patch3, clashes and probably not needed anymore
  - reverse patch4, because upstream merged this broken patch
  - test Novell's excessive malloc for new terminals patch v3 
    (GNOME #160993)


author: Ray Strode <rstrode@redhat.com> 0.11.11-13
changelog:
  - Don't copy blocks; use pointers to block array directly.
    (based on the debugging efforts of 
    Egmont Koblinger <egmong@uhulinux.hu>, bug 135537).


author: Ray Strode <rstrode@redhat.com> 0.11.11-11
changelog:
  - Fix keypad keys when numlock is on in application mode
    (Patch from <jylefort@brutele.be>, bug 126110).


author: Dan Williams <dcbw@redhat.com> 0.11.11-10
changelog:
  - Redraw background when unobscured visiblity event is received
  	(workaround, patch from Jon Nettleton) #rh100420#
  - Mad speed zoom zoom (patch from Soren Sandmann) #rh132770#


author: Ray Strode <rstrode@redhat.com> 0.11.11-7
changelog:
  - Add support for "scroll-up" and "scroll-down" control 
    sequences to make vte more xterm compatible (Patch
    from Nalin, #128375)


author: Ray Strode <rstrode@redhat.com> 0.11.11-5
changelog:
  - Do bottom row snapping yet another way to fix scrolling
    artifacts (bug 131798)
  - Add new debugging patch for keeping track of row numbers


author: Nalin Dahyabhai <nalin@redhat.com> 0.11.10-1
changelog:
  - fix vte_terminal_set_encoding() so that the Terminal/Character Coding
    menu works in gnome-terminal again
  - fix display of the character under the cursor in cases where it's too wide


author: Nalin Dahyabhai <nalin@redhat.com> 0.11.9-1
changelog:
  - fix saving/restoring the cursor with DECSET/DECRST
  - revert behavior wrt ambiguously-wide characters to be more like 0.10.x


author: Nalin Dahyabhai <nalin@redhat.com> 0.11.7-1
changelog:
  - make handling of 8-bit SS2 and SS3 coexist properly with UTF-8 and other
    encodings where valid text can't be mistaken for the control codes
  - fix keypad page down in application keypad mode
  - fix reference loop which prevented proper finalizing of the widget


author: Nalin Dahyabhai <nalin@redhat.com> 0.11.5-1
changelog:
  - pick up font settings from xrdb if GTK+ doesn't know anything
  - support CP437 as a national replacement charset


author: Nalin Dahyabhai <nalin@redhat.com> 0.11.4-1
changelog:
  - update transparent background faster when moving windows
  - fix bold
  - add an AtkComponent interface for accessibility


author: Nalin Dahyabhai <nalin@redhat.com> 0.10.22-2
changelog:
  - stop gratuitously resetting the IM (#81542)
  - be more careful about assuming the IM exists when it might not


author: Nalin Dahyabhai <nalin@redhat.com> 0.10.22-1
changelog:
  - be more careful about when we reset the IM (#81542)
  - always perform character centering
  - fix drawing of rows where the first exposed cell is the second half of a
    full-width character


author: Nalin Dahyabhai <nalin@redhat.com> 0.10.21-1
changelog:
  - report accessible focus-changed events properly
  - fix window_scroll optimization check (#83679)
  - fix ctrl-[2-8] (#83563)
  - grab focus on button 1 click (#84384)


author: Nalin Dahyabhai <nalin@redhat.com> 0.10.20-1
changelog:
  - don't mix up maintainer mode with debugging mode
  - coalesce data reads to spare the X server from too many small updates (#83472)
  - fix backtab


author: Nalin Dahyabhai <nalin@redhat.com> 0.10.18-1
changelog:
  - fix for uncertain finalize order between the terminal and its accessible peer
  - always update the cursor position on accessibe-changed events so that the
    accessibility layer doesn't ask for text past the end of the buffer


author: Nalin Dahyabhai <nalin@redhat.com> 0.10.15-1
changelog:
  - make mouse modes mutually-exclusive
  - update background immediately on realize
  - fix compile error on older versions of gcc
  - fix cursor hiding


author: Nalin Dahyabhai <nalin@redhat.com> 0.10.10-1
changelog:
  - add text that scrolls off of a restricted scrolling area which goes to the
    top of the visible screen to the scrollback buffer (#75900)


author: Nalin Dahyabhai <nalin@redhat.com> 0.10.9-1
changelog:
  - fix scrolling through the accessibility layer
  - stop heeding NumLock when mapping cursor keys
  - steal keypress events from the input method if Meta modifier is in effect


author: Nalin Dahyabhai <nalin@redhat.com> 0.10.8-1
changelog:
  - report changes to the accessibility layer when text is removed or moved
    around, still needs work
  - don't use XftNameUnparse, it might not always be there


author: Nalin Dahyabhai <nalin@redhat.com> 0.10.7-1
changelog:
  - distinguish line-drawing character set code points from the same code points
    received from the local encoding


author: Nalin Dahyabhai <nalin@redhat.com> 0.9.2-1
changelog:
  - fix the crash-on-resize bug (#75871)
  - add bold
  - implement sun/hp/legacy function key modes
  - recognize cs with no parameters
  - fix ring buffer manipulation bugs
  - cut down on overly-frequent invalidates


author: Nalin Dahyabhai <nalin@redhat.com> 0.8.20-1
changelog:
  - build fixups from Jacob Berkman
  - move the python module into the gtk-2.0 subdirectory, from James Henstridge


author: Nalin Dahyabhai <nalin@redhat.com> 0.8.10-1
changelog:
  - autoscroll (#70481)
  - only perform cr-lf substitutions when pasting (#72639)
  - bind GDK_ISO_Left_Tab to "kB" (part of #70340)


author: Nalin Dahyabhai <nalin@redhat.com> 0.8.3-1
changelog:
  - track changes to the style's font
  - always open fonts right away so that the metric information is correct
  - make audible and visual bell independent options


author: Nalin Dahyabhai <nalin@redhat.com> 0.8.0-1
changelog:
  - rework font handling to use just-in-time loading
  - handle iso-2022 escape sequences, perhaps as much as they might make sense
    in a Unicode environment


author: Nalin Dahyabhai <nalin@redhat.com> 0.7.4-1
changelog:
  - handle massive amounts of invalid data better (the /dev/urandom case)
  - munged up patch from Owen to fix language matching
  - fix initialization of new rows when deleting lines


author: Nalin Dahyabhai <nalin@redhat.com> 0.7.3-1
changelog:
  - more fixes for behavior when not realized
  - require bitmap-fonts
  - escape a control sequence properly


author: Nalin Dahyabhai <nalin@redhat.com> 0.7.2-1
changelog:
  - fix cursor over reversed text
  - fix character positioning in Xft1
  - add border padding
  - fix lack of shift-in when resetting


author: Nalin Dahyabhai <nalin@redhat.com> 0.7.1-1
changelog:
  - rework rendering with Pango
  - special-case monospaced Xft1 rendering, hopefully making it faster
  - modify pasting to use carriage returns instead of linefeeds


author: Nalin Dahyabhai <nalin@redhat.com> 0.5.0-1
changelog:
  - use gunichars internally
  - scroll regions more effectively
  - implement part of set-mode/reset-mode (maybe fixes #69143)
  - fix corner case in dingus hiliting (#67930, really this time)


author: Nalin Dahyabhai <nalin@redhat.com> 0.4.9-1
changelog:
  - check for iconv failures properly and report them more aggressively
  - guess at a proper default bold color (#68965)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix segfaulting during dingus highlighting when the buffer contains non-ASCII
    characters (#67930)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - rework default color selection
  - provide a means for apps to just set the foreground/background text colors
  - don't scroll-on-keystroke when it's just alt, hyper, meta, or super (#68986)


author: Nalin Dahyabhai <nalin@redhat.com> 0.4.5-1
changelog:
  - don't append spaces to multicolumn characters when reading the screen's
    contents (part of #67379)
  - fix overexpose of neighboring cells (part of #67379)
  - prevent backscroll on the alternate screen for consistency with xterm
  - bind F10 to "k;", not "k0" (#67133)


author: Nalin Dahyabhai <nalin@redhat.com> 0.4.4-1
changelog:
  - clear alternate buffer when switching screens (#67094)
  - fix setting of titles, but crept in when cleaning up GIConv usage (#67236)


author: Nalin Dahyabhai <nalin@redhat.com> 0.4.3-1
changelog:
  - correct referencing/dereferencing of I/O channels (#66248)
  - correct package description to not mention the sample app which is no longer
    included


author: Nalin Dahyabhai <nalin@redhat.com> 0.4.2-1
changelog:
  - fix "cursor mistakenly hidden when app exits" by making cursor visibility
    a widget-wide (as opposed to per-screen) setting


author: Nalin Dahyabhai <nalin@redhat.com> 0.3.26-1
changelog:
  - don't package up the test program
  - emit "child-exited" signals properly
  - try to allow building with either pangoxft-with-Xft1 or pangoxft-with-Xft2


author: Nalin Dahyabhai <nalin@redhat.com> 0.3.16-1
changelog:
  - hook up Insert->kI
  - convert scroll events to button 4/5 if an app wants mouse events
  - don't send drag events when apps only want click events
  - fix selection crashbug


author: Nalin Dahyabhai <nalin@redhat.com> 0.3.4-1
changelog:
  - try to speed up sequence recognition a bit
  - disable some window_scroll speedups that appear to cause flickering


author: Akira TAGOH <tagoh@redhat.com> - 7900-1
changelog:
  - New upstream release.
  - anthy-7900-fix-undef-non-weak-symbol.patch: fixed the undefined non-weak
    symbols issue. (#198180)
  - use dist tag.


author: Akira TAGOH <tagoh@redhat.com> - 7802-2
changelog:
  - exclude ppc64 to make anthy-el package. right now emacs.ppc64 isn't provided
    and buildsys became much stricter.


author: Akira TAGOH <tagoh@redhat.com> - 7622-1
changelog:
  - New upstream snapshot release.
    - removed unnecessary patches:
      - anthy-2832.patch
      - anthy-2834.patch


author: Akira TAGOH <tagoh@redhat.com> - 7500-1
changelog:
  - New upstream release.
    - larning words works now. (#178764)
  - anthy-2832.patch: patch from upstream that fixes wrong order of candidate list.
  - anthy-2834.patch: patch from upstream that fixes unexpected word segment.
  - anthy-gcanna-nakaguro.patch: added a word to dictionary to convert nakaguro to slash.


author: Akira TAGOH <tagoh@redhat.com> - 7013-1
changelog:
  - New upstream snapshot release.
  - removed the patches:
    - anthy-add-placename-dict.patch: isn't needed anymore.
    - anthy_base.t.diff: merged into upstream.
    - zipcode-20050831.tar.bz2: merged into upstream.


author: Akira TAGOH <tagoh@redhat.com> - 6829-3
changelog:
  - applied some patches from anthy-dev mailing list to improve the dictionaries.
    - anthy_base.t.diff
    - anthy_gcanna.ctd.diff
    - anthy_gcanna.ctd_20050918.diff
    - anthy_gcanna.ctd_20050920.diff
  - parameterize anthy-el-xemacs build.


author: Akira TAGOH <tagoh@redhat.com> - 6700b-1
changelog:
  - New upstream release.
  - Import into Core.
  - includes the libraries into anthy and added Obsoletes: anthy-libs.


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-cirrus to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.
  - Added cirrus_alpine.so, cirrus_laguna.so to the file manifest.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for cirrus video driver generated automatically
    by my xorg-driverspecgen script.


author: Ray Strode <rstrode@redhat.com> - 1:2.15.1.1-7
changelog:
  - don't require a display to build invest applet (bug 200970).
    Problem discovered by Nalin Dahyabhai <nalin@redhat.com>


author: Ray Strode <rstrode@redhat.com> - 2.14.0-3
changelog:
  - apply patch

   * Tue Mar 28 2006 Ray Strode <rstrode@redhat.com> - 2.14.0-2
  - export symbols in gswitchit applet so applet plugins 
    work (bug 187168)


author: Ray Strode <rstrode@redhat.com> - 1:2.12.1-3
changelog:
  - build correct command string for cpufreq-selection. Fix
    spotted by Ingo Schaefer <ingo@ingo-shaefer.de> (Bug 164147).


author: Ray Strode <rstrode@redhat.com> 1:2.11.91-2
changelog:
  - disable scrollkeeper database updates
  - add omf files to package list
  - require gnome-utils for gucharmap/charpick integration


author: Mark McLoughlin <markmc@redhat.com> 1:2.10.1-10
changelog:
  - Backport from HEAD patch to remove lame warning dialog when the
    mixer applet can't find a mixer device


author: Ray Strode <rstrode@redhat.com> 1:2.10.0-5
changelog:
  - Don't use %postun -p optimization now that we do more than
    just /sbin/ldconfig in %postun (bug 152236)


author: Mark McLoughlin <markmc@redhat.com> 2.8.0-2
changelog:
  - Remove the wireless applet and add patch to use the netstatus
    applet for backwards compat. bug #131652.


author: Mark McLoughlin <markmc@redhat.com> 2.7.2-2
changelog:
  - Run mc-install-default-macros in %post
  - Fixed small-volume patch from Nathan Fredrickson <nathan@silverorange.com>


author: Mark McLoughlin <markmc@redhat.com> 1:2.6.2.1-1
changelog:
  - Update to 2.6.2.1
  - Re-do the way we decide whether to build the battstat applet.
    Should fix 122379
  - Remove some patches that have gone upstream


author: Havoc Pennington <hp@redhat.com> 1:2.2.0-5
changelog:
  - rebuild with datadir/wireless-applet and datadir/gen_util, 
    someone got overzealous deleting unpackaged files instead 
    of packaging them. #82279


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Keep the CD device closed except when actually accessing it
    (bugzilla.gnome.org 91512)
  - Register CD player so we can start only one CD player
    for display from magicdev. (#39208)


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 2.0.1, and build with new gail
  - 69971 (use correct ppp on/off commands)
  - remove scrollkeeper dtd-compliance patch, 
    fixed upstream apparently (patch doesn't apply anymore)


author: Havoc Pennington <hp@redhat.com>
changelog:
  - rebuild with new libs
  - remove temporary hack for too-old libgnomeui
  - add /etc/sound stuff to file list


author: Havoc Pennington <hp@redhat.com>
changelog:
  - no apm on sparc, #60538
  - obsolete battstat_applet for Ximian compat, #51427
  - use ifup/ifdown ppp0 instead of pppon/pppoff for default 
    ppp command in modemlights, #54199


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 1.4.0.5, cross fingers
  - add gconf-devel buildreq, though this is dubious as hell
    (pulled in by gtik using gnome-vfs, but if gtik actually
     accessed gconf it would fail due to gnorba conflict)
  - patch totally busted charpick Makefile.am cflags override


author: Akira TAGOH <tagoh@redhat.com>
changelog:
  - Updated Japanese translation (ja.po, .desktop).
    Note: Please remove Source[23]: when release the next upstream version.


author: Bill Nottingham <notting@redhat.com> - 1:3.2.2-3
changelog:
  - remove shared/devel libs - nothing uses them (fixes #155724)
  - since they're not needed, turn off ppc build
  - fix debuginfo generation


author: Bill Nottingham <notting@redhat.com> - 1:3.2.2-2
changelog:
  - remove on_ac_power in favor of apm/acpi/etc neutral version
  - require pm-utils, where said version lives


author: Bill Nottingham <notting@redhat.com> -1:3.2.2-1
changelog:
  - update to 3.2.2 (#115650, #125561)
  - fix some ordering issues in apmscript (#92297)
  - make /usr/bin/apm return errors sanely (#128405)
  - fix obviously wrong sound code (#141463)


author: Bill Nottingham <notting@redhat.com> 1:3.0.2-19
changelog:
  - add support for laptop_mode in apmscript
  - make LOWPOWER_SERVICES not depend on POWER_SERVICES (#74935)
  - remove xapm manpage (#77900)
  - fix soundmodules bogosity (#90592)
  - fix ordering of network & services (#90512, #85436, <dberger@oubliette.org>)
  - own /etc/sysconfig/apm-scripts (#74026)
  - run anacron with -s (#65689)


author: Jeremy Katz <katzj@redhat.com> 1:3.0.2-14
changelog:
  - add CPUFREQ= to /etc/sysconfig/apmd
  - if CPUFREQ="yes" and /proc/cpufreq exists, use cpufreq to change between 
    performance and power-save when switching between ac and battery


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.2-6
changelog:
  - Fix up network device detection (#59447)
  - Adapt hwclock calls to current hwclock behavior (#59994)
  - Fix net device resume (#59009, #49918)
  - Re-add pre-{suspend,resume} hooks (#44603)
  - Move LOW_POWER notification file to /var/run/apmd (#56389)
  - Determine if X is running before anything else (#20892)
  - Run hwclock earlier on resume (#28234)
  - Change permissions on /etc/sysconfig/apmd, 0644 is sufficient (#54222)
  - Fix stab location (#56718)
  - Don't mess up terminal beep on resume (#57955)


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0.2-2
changelog:
  - Try to work around some more BIOS bugs
  - Log which network devices are up when entering suspend mode; the old
    way, only ONBOOT network devices would come back up.


author: Bernhard Rosenkraenzer <bero@redhat.com> 3.0final-36
changelog:
  - Add yet another workaround for broken BIOSes, #56368
  - Don't restart network/netfs unless it was running at suspend time, #54041


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - If we need to lock the screen at suspend and we're running KDE, use a DCOP call
    rather than launching xscreensaver
  - Add hooks to stop services when switching to battery power and to restart them when we
    return to line power
  - Add hooks to stop services when running short of battery power and to restart them when we
    return to line power
  - Add maestro and cs4281 to the default SOUNDMODULES, they're quite common


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Don't set umask(0) at startup! (#23133)
  - Add support for restarting the network on resume, especially
    useful for DHCP (#22994)
  - mark /etc/sysconfig/apmd %config(noreplace)
  - Treat a "standby" event like a "suspend" event (#21115)
  - Greatly improve sound handling, based on patch from
    pcfe@redhat.com (#21394)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Remove the obsolete -i and -n options from the man page (Bug #19610)
  - Fix build with tar >= 1.13.18


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - change startup order - apmd should be started after netfs to cope with
    an NFS /usr (Not that anyone uses NFS mounted filesystems on notebooks,
    but...) (Bug #16251)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Add NETFS_RESTART feature, fix up LOCK_X to use yes/no like the
    other settings (Bug #17068 and some other stuff)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - ignore "start" and "stop" events in apmscript instead of claiming
    they're unknown events (Bug #15598)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Use cardctl to suspend/resume pcmcia cards instead of restarting
    the entire subsystem (Bug #13836)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Don't use obsolete parameters (Bug #13710)
  - Add the possibility to lock X displays on suspend, based on patch from
    Hannu Martikka <Hannu.Martikka@nokia.com>
  - some other fixes to the apmd scripts


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix resume for users of non-bash shells (Bug #11580)
  - Support restoring sound with the commercial OSS drivers (Bug #11580)


author: Bernhard Rosenkränzer <bero@redhat.com>
changelog:
  - Some more changes to apm-scripts:
    - Fix up HDPARM_AT_RESUME
    - Add ANACRON_ON_BATTERY, and default to turning it off


author: Bernhard Rosenkränzer <bero@redhat.com>
changelog:
  - Various fixes to the apm-scripts:
    - use modprobe instead of insmod for restoring sound
    - don't try to restore the X display if X isn't running
    - /usr/sbin/anacron, not /usr/bin/anacron
    - misc. cleanups


author: Bernhard Rosenkränzer <bero@redhat.com>
changelog:
  - Fix up the broken harddisk fix (needs to be done earlier during suspend,
    also we need to manually wake the drive at resume.)


author: Bernhard Rosenkränzer <bero@redhat.com>
changelog:
  - Updates to the apm-scripts and sysconfig/apmd:
    - Make hwclock --hctosys call optional (CLOCK_SYNC variable)
    - Add possibility to modify hdparm settings on suspend/resume.
      Some broken harddisks (Gericom 3xC) require this for suspend
      to disk to work.


author: Bernhard Rosenkränzer <bero@redhat.com>
changelog:
  - Put in new apm scripts to handle PCMCIA suspend/resume, and give the
    possibility to refresh displays and reload sound modules for some
    broken chipsets
  - permit builds on i486, i586 and i686 archs


author: Erik Troan <ewt@redhat.com>
changelog:
  - moved init script into a separate source file
  - added restart and status options to initscript
  - made it use a build root
  - don't start apm when the package is installed
  - don't stop apm when the package is removed


author: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
changelog:
  - Compiled on RH5.0 against libc6.
  - Renamed /etc/rc.d/init.d/apmd.init to /etc/rc.d/init.d/apmd
  - Make /etc/rc.d/init.d/apmd to be chkconfig-compliant.


author: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
changelog:
  - Fixed buggy /etc/sysconfig/apmd file generation in the spec file.
  - Added a patch for apm.c's option handling.
  - Both fixes were submitted by Richard D. McRobers <rdm@csn.net>


author: Mike A. Harris <mharris@redhat.com> 1.0.1.4-1
changelog:
  - Updated xorg-x11-drv-apm to version 1.0.1.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-hyperpen to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for hyperpen input driver generated automatically
    by my xorg-driverspecgen script.


author: Doug Ledford <dledford@redhat.com> - 0.6-1.el5
changelog:
  - Build against non-XRC libibverbs
  - Update to ofed 1.4.1 final bits
  - Remove no longer needed memleak patch
  - Related: bz506258, bz506097


author: Doug Ledford <dledford@redhat.com> - 0.5-5.el5
changelog:
  - Fix a minor memleak (from upstream)
  - Rebuild against libibverbs that has xrc support
  - Related: bz459652


author: Doug Ledford <dledford@redhat.com> - 0.5-3
changelog:
  - Upstream has updated the libnes tarball without changing the version.  Pick
    up the libnes-0.5.tar.gz tarball that's dated 13-Jun-2008
  - Resolves: bz451470


author: Daniel Veillard <veillard@redhat.com> - 0.5.7-1.el5
changelog:
  - Update to 0.5.7 upstream
  - update spec file accordingly
  - 4 patches for plugging leaks and a segfault
  - add support for ACPI, PAE and APIC
  - Resolves: rhbz#512233


author: Daniel Veillard <veillard@redhat.com> - 0.5.5-1.el5
changelog:
  - Rebase against new upstream release 0.5.5 fixing some leaks
  - Resolves: rhbz#474681
  - fix an unowned directory
  - Resolves: rhbz#481810


author: Daniel Veillard <veillard@redhat.com> - 0.5.1-1.el5
changelog:
  - Updated to 0.5.1 upstream release
  - added a bunch of extra patches present upstream and in Fedora
  - Resolves: rhbz#438555


author: Dan Smith <danms@us.ibm.com> - 0.3-4
changelog:
  - Fixed loader config for 64-bit systems
  - Added missing root/interop schema install
  - Added RegisteredProfile.registration to install


author: Dan Smith <danms@us.ibm.com> - 0.1-2
changelog:
  - Cleaned up Release
  - Removed unnecessary Requires
  - After install, condrestart pegasus
  - Updated to latest source snapshot


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - improved the chat mode fix to allow specifying the remotename
    so that multiple wvdial instances can't step on each other.


author: Mark Johnson <mjohnson@redhat.com> 3.3.1-1
changelog:
  - Initial public release
  - Moved files to /usr/share/xml
  - Added SGML catalog registration
  - Fixed catalog.xml, which gets broken by xmlcatalog
  - Composed README.fedora


author: Adam Jackson <ajax@redhat.com> 1.3.0-8.2
changelog:
  - vesa-1.3.0-vbe-dpms.patch: Use VBE's DPMS method, instead of manual VGA
    register writes, so that laptop backlights turn off too. (#494671)


author: Adam Jackson <ajax@redhat.com> 1.3.0-5
changelog:
  - vesa-1.3.0-mode-heuristics.patch: If strict intersection of VBE and EDID
    modes leaves no modes remaining after validation, try again with just
    range and VBE checks.  Replaces earlier range-hack and validmode patches.


author: Adam Jackson <ajax@redhat.com> 1.3.0-4
changelog:
  - vesa-1.3.0-range-hack.patch: Work around broken ATI video BIOSes.
  - Disown the module dir
  - Fix the License


author: Adam Jackson <ajax@redhat.com> 1.3.0-2
changelog:
  - vesa-1.2.1-validmode.patch: Strictly limit runtime modes to the intersection
    of the BIOS and DDC lists, if a DDC list exists; fixes cases where we'd
    choose 1600x1200 on 1680x1050 panel.  Conversely, be more forgiving when
    validating the resulting set against the sync ranges; fixes 640x480 syndrome
    when the monitor has broken DDC.  Don't be deceived though, vesa still sucks.


author: Adam Jackson <ajax@redhat.com> 1.3.0-1
changelog:
  - Update to 1.3.0
  - vesa-1.2.1-validmode.patch: Implement a ValidMode driver hook, which rejects
    modes not present in the BIOS or outside the capability of the monitor.


author: Mike A. Harris <mharris@redhat.com> 1.0.1.2-1
changelog:
  - Updated xorg-x11-drv-vesa to version 1.0.1.2 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for vesa video driver generated automatically
    by my xorg-driverspecgen script.


author: Jon Masters <jcm@redhat.com> - 3.3-0.pre3.1.60
changelog:
  - Add SYSV locking in the case of a read-only filesystem.
  - Resolves: #430942
  - Do not create Xen grub boot entries for a running domU.
  - Resolves: #509568
  - Do not re-link compatible module when also removing it.
  - Resolves: #477089


author: Jon Masters <jcm@redhat.com> - 3.3-0.pre3.1.50
changelog:
  - Update weak-modules script to use newer logic on add_modules to
  - avoid occasional creation of needless subdirectories.
  - Resolves: #484762


author: Jon Masters <jcm@redhat.com> - 3.3-0.pre3.1.46
changelog:
  - Correct use of 'nm' to avoid unnecessary warning messages.
  - Also add a dependency on binutils and mkinitrd.
  - Resolves: #463777


author: Jon Masters <jcm@redhat.com> - 3.3-0.pre3.1.39
changelog:
  - Make modprobe operate in nonblocking mode by default
  - Resolves: #280411.
  - Add a --delete-modules to weak-modules to avoid linking compat
  - Resolves: #432959.


author: Jon Masters <jcm@redhat.com> - 3.3-0.pre3.1.37
changelog:
  - Sort modules alphabetically.
  - Resolves: #249449.
  - Check override of modules.
  - Resolves: #253512.
  - Fix "--dry-run" option.
  - Resolves: #254141.


author: Jon Masters <jcm@redhat.com> - 3.3-0.pre3.1.34
changelog:
  - Update to fix inter-module symbol references on 64-bit platforms.
  - (fix wasn't properly in the build yesterday).
  - Resolves: #247986.


author: Jon Masters <jcm@redhat.com> - 3.3-0.pre3.1.32
changelog:
  - Update fix to pipe issue and use same logic in other place we call "head -n 1"
  - just in case it would ever also cause similarly noisy output.
  - Resolves: #249537.


author: Jon Masters <jcm@redhat.com> - 3.3-0.pre3.1.31
changelog:
  - Overhaul logic for bootpath driver handling to work with new-kernel-pkg
    grubby better in keeping with their design.
  - Resolves: #252210.


author: Jon Masters <jcm@redhat.com> - 3.3-0.pre3.1.27
changelog:
  - Make naming of Driver Update Program grub entry more friendly to RHEL users than the previous entries were.
  - Make the resultant grub entry default bootable.
  - Related: #224076.


author: Jon Masters <jcm@redhat.com> - 3.3-0.pre3.1.15
changelog:
  - Prevent modifying existing grub entries (always add them).
  - Don't ask for new entries to be default by default.
  - Resolves: #222085, #222084.


author: Jon Masters <jcm@redhat.com> - 3.3-0.pre3.1.10
changelog:
  - Modify weak-modules to handle kmod removal and the need to create
    compatible kernel module links to other compatible modules.
  - Resolves: #215272.


author: Jon Masters <jcm@redhat.com> - 3.3-0.pre3.1.9
changelog:
  - Modify weak-modules to handle module removal against multiple kABI compat.
    kernels at the same time, removing the correct module links.
  - Resolves: #216645.


author: Jon Masters <jcm@redhat.com> - 3.3-0.pre3.1.5
changelog:
  - BZ205510 fix causes BZ211519 because mkinitrd mistakenly parses the m-i-t
    output including preloading commands. Reverting this patch for now.


author: Jon Masters <jcm@redhat.com> - 3.3-0.pre3.1.3
changelog:
  - Updated to upstream with some miscellaneous fixes from contrib.
  - Rebuilt allconf patch since retabbed upstream source.


author: Jon Masters <jcm@redhat.com> - 3.3-0.pre2.1.3
changelog:
  - Updated to upstream with new module priority/override features.
  - Documentation updates and other miscellaneous fixes.


author: Jon Masters <jcm@redhat.com> - 3.3-0.pre1.4.6
changelog:
  - Don't call depmod on removing a kernel.
  - Warn rather than exit if we can't process weak-updates on new kernel
  - Handle duplicate modules by picking the latter version of the two.


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added the mounting of /proc/fs/nfsd to modprobe.conf.dist
    so it gets mounted when nfsd is loaded.


author: Bill Nottingham <notting@redhat.com> 2.4.26-9
changelog:
  - add nfsv4 aliases to modprobe.conf.dist
  - clean out upstreamed aliases in modprobe.conf.dist
  - mount rpc_pipefs when sunrpc is loaded


author: Bill Nottingham <notting@redhat.com> 2.4.26-6
changelog:
  - update module-init-tools to 3.0pre10
  - fix modinfo (#116305)
  - always include /etc/modprobe.conf.dist (don't require the line in modprobe.conf)
  - ship a static modprobe.conf.dist, don't generate it at build time
  - clean up modprobe.conf.dist a little (#113772, #113768)


author: Bill Nottingham <notting@redhat.com> 2.4.26-1
changelog:
  - update to 2.4.26
  - switch around man pages; the module-init-tools man pages are now
    the default
  - add backwards compat usb aliases for the simple case
  - add some commentary to modules.conf/modprobe.conf on conversion
  - modutils-devel goes away


author: Bill Nottingham <notting@redhat.com> 2.4.25-8
changelog:
  - fix leak in module-init-tools-depmod (<arjanv@redhat.com>)
  - look in /lib/modules/`uname -r`/updates for modules


author: Bill Nottingham <notting@redhat.com> 2.4.25-2
changelog:
  - add joystick alias (#91309)
  - add alias for af_key for IPSEC
  - update module-init-tools to 0.9.12
  - ship a modprobe.conf.dist with the aliases that are built into 2.4
    modutils
  - generate a modprobe.conf if needed on install


author: Bill Nottingham <notting@redhat.com> 2.4.22-7
changelog:
  - make sure we don't use diet anywhere but x86, even if it's lying around
  - fix zlib linkage, for real
  - switch ftape alias (#7674)


author: Matt Wilson <msw@redhat.com>
changelog:
  - added a -devel subpackage that contains libraries that apps can use
    to implement insmod and rmmod


author: Bill Nottingham <notting@redhat.com>
changelog:
  - update to 2.4.6
  - alias binfmt-0000 off (#9709)
  - turn off 'modules.conf is more recent than modules.dep' message (#14276,
    others)
  - return nonzero from depmod if there are errors (#40935)
  - fix manpage typo (#33123)


author: Elliot Lee <sopwith@redhat.com> 2.4.5-3
changelog:
  - Add modutils-2.4.5-stblocal.patch from Jakub. See the e-mail message
    inside the patch file for details.
  - Use smp_mflags macro


author: Bill Nottingham <notting@redhat.com>
changelog:
  - update to 2.4.0
  - tweak irda aliases
  - remove vixie-cron dependency (it's not *required*)
  - add missing %build
  LANG=C
  export LANG
  unset DISPLAY
   (where did that go?)


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - update to 2.3.9.
  - port RH patches from 2.1.121 to 2.3.9 where needed.
  - disable warning about conf.modules for now, in 7.0
    we should move to modules.conf.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - pick up ultrapenguin patches (not applied for now).
  - pre-generate keyword.c so gperf doesn't have to be present (not applied).
  - util/sys_cm.c: fix create_module syscall (signed return on sparc too)


author: Jakub Jelinek <jj@ultra.linux.cz>
changelog:
  - Handle EM_SPARCV9, kludge to support both 32bit and 64bit kernels
    from the same package on sparc/sparc64.


author: Phil Knirsch <pknirsch@redhat.com> - 1.0.4-4
changelog:
  - Made a better fix for the powerdown button which checks if g-p-m is running
  - Don't install sample.conf anymore, not needed


author: Phil Knirsch <pknirsch@redhat.com> - 1.0.4-3
changelog:
  - Disable the automatic shutdown -h via powerdown button by default due to
    conflicts with gnome-power-manager


author: Miloslav Trmac <mitr@redhat.com> - 1.0.3-2
changelog:
  - Update to 1.0.3 (fixes #128834)
  - s/Copyright/License/
  - Add logrotate config file (#110677, from Michal Jaegermann)
  - Don't verify contents of /var/log/acpid (#125862)
  - Use $RPM_OPT_FLAGS
  - Fix and cleanup acpid-1.0.1-pm1.patch
  - Add condrestart to %postun


author: Tim Hockin <thockin@sun.com>
changelog:
  - Updated RPM spec with patch from sun for chkconfig on/off
    - Add Changelog, make 'make rpm' use it.


author: Tim Hockin <thockin@sun.com>
changelog:
  - Fixed logging bug - not appending to log (O_APPEND needed)
    - Fix 'make install' to not need root access
    - Fix RPM spec to not need root


author: Tomas Smetana <tsmetana@redhat.com> - 4.17-14
changelog:
  - fix #235420 - recognize UTF-16, little-endian encoded XML file
  - fix #249473 - wrongly identifies text file as MPEG-4 LO-EP
  - fix #428437 - GFS2 recognition
  - fix #444524 - ext4/ext4dev recognition


author: Martin Bacovsky <mbacovsk@redhat.com> - 4.17-10
changelog:
  - resolves: #241027: CVE-2007-2799 file integer overflow
  - Resolves: #233337: CVE-2007-1536: file 4.20 fixes a heap overflow 
    in that can result in arbitrary code


author: Radek Vokal <rvokal@redhat.com> - 4.12-3
changelog:
  - core64 patch fixing output on core files (#145354) <kzak@redhat.com>
  - minor change in magic patch


author: Radek Vokal <rvokal@redhat.com>
changelog:
  - zlib patch deleted, note patch deleted, rh patch updated, debian patch updated
  - upgrade to file-4.10


author: Jeff Johnson <jbj@jbj.org> 4.07-1
changelog:
  - upgrade to 4.07.
  - deal gracefully with unreadable files (#113207).
  - detect PO files (from Debian).


author: Jeff Johnson <jbj@jbj.org> 4.02-3
changelog:
  - use zlib rather than exec'ing gzip.

  -* Thu Aug 28 2003 Dan Walsh <dwalsh@redhat.com>
  -- Add Selinux support.


author: Trond Eivind Glomsrød <teg@redhat.com> 3.37-1
changelog:
  - 3.37
  - s/Copyright/License/
  - build with --enable-fsect-man5, drop patch
  - disable two old patches


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - fix off-by-1 error when creating filename for use with -i.
  - include a copy of GNOME /etc/mime-types in /usr/share/magic.mime (#14741).


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - identify ELF stripped files correctly (#4665).
  - use SPARC (not sparc) consistently throughout (#4665).
  - add entries for MS Office files (#4665).


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 6.3.6-1.1
changelog:
  - Fix APOP vulnerability (CVE-2007-1558)
    Resolves: #241196
  - Fix broken support for KPOP
    Resolves: #224018


author: Miloslav Trmac <mitr@redhat.com> - 6.3.3-2
changelog:
  - Fix some type mismatches on 64-bit architectures
  - Fix checking for res_* on architectures with newer glibc ABI


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - switch to Robert Scheck's fix for capa probing endless loop on pop servers
    which don't support capa (#115474)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - split the use-correct-service-name and check-for-gssapi-in-pop portions of
    gssapi+pop fix into pieces
  - only trigger pop capa probe if authentication method != password


author: Nalin Dahyabhai <nalin@redhat.com> 6.2.0-8
changelog:
  - add patch to not truncate headers which have been munged to include a
    hostname where one didn't exist before (CAN-2003-0792), backport from fix
    for 6.2.4 included in 6.2.5


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add patch to reject bogusly large message counts, backported from 5.9.10
  - build for RHL 6.2 errata


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix handling of "any" authentication (#32527)
  - accept more arguments to --auth
  - parse "auth password" correctly in the configuration file


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 5.7.2
  - call AC_PROG_MAKE_SET in configure.in
  - fix various things which cause it to not compile if gssapi is enabled


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - version 5.2.7
  - add patch so that fetchmailconf will not output ssl configure statements
    is no ssl is configured


author: David Malcolm <dmalcolm@redhat.com> - 5.0.4-1
changelog:
  - Split the evolution desktop file into four separate ones: one per component.
    Force people to update evolution, to avoid it using a stale symlink. 
    (#170799).


author: Ray Strode <rstrode@redhat.com> 3.8.0-1
changelog:
  - don't include kde legacy stuff anymore, since
    kde uses it's own applications menu file now and it 
    breaks gnome (bug 153125)


author: Than Ngo <than@redhat.com> 3.7.1-7
changelog:
  - add mssing kwrite/kate/kedit, kcontrol center, System setting
    in menu #147121, #12218, #1221811, #143937
  - get rid of capplets from preferences.menu, #149233
  - fix icon entry in desktop file #143336


author: Dan Williams <dcbw@redhat.com> 3.7-5
changelog:
  - #rh137520# Add "application/x-ole-storage" to Calc, Impress, and Writer
  	desktop files, so Evolution can associate these with OOo


author: <dcbw@redhat.com> - 3.7-2
changelog:
  - Gratuitous version bump from upstream
  - #rh74651# no mimetype entries for microsoft offic
  - #rh136731# wordperfect files (.wpd) should be associated with openoffice


author: Ray Strode <rstrode@redhat.com> 1.8-1
changelog:
  - release 1.8, remove AC_PROG_LIBTOOL from configure.in
  - release 1.7, remove gnome-control-center.desktop


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 0.23 with new translations, KDE MIME fixes, openoffice Exec= fixes
  - don't munge en_US text, broke docs. Back to just "Web Browser"


author: Peter Vrabec <pvrabec@redhat.com> 1.5a65-1
changelog:
  - upgrade 1.5a65-1 made by Horst H. von Brand <vonbrand@inf.utfsm.cl>
  - Source URL changed, no homepage now
  - License changed from GPL to CDDL 1.0
  - Define MAKEPROG=gmake like the Gmake.linux script does
  - Disable fat binary as per star/Makefile, update star-1.5-selinux.patch for
    the various *.mk files used in that case
  - Axe /usr/share/man/man1/match.1*, /usr/etc/default/rmt too
  - Explicit listing in %files, allow for compressed or plain manpages


author: Ondrej Vasik <ovasik@redhat.com> 2:1.15.1-30
changelog:
  - CVE-2007-4476 - fix stack crashing in safer_name_suffix
  - CVE-2010-0624 - fix heap-based buffer overflow by expanding
    a specially-crafted archive


author: Ondrej Vasik <ovasik@redhat.com> 2:1.15.1-25
changelog:
  - do process install-info only without --excludedocs(#530955)
  - provide symlink manpage for gtar (#530956)
  - add BuildRequires for rsh(#294661)
  - fix off-by-one errors in xattrs patch (#472553)
  - do not remove old files with --keep-newer-files (#495686)
  - fix restoring of directory default acls(#512097)
  - fix various problems with tar xattrs(#518208)
  - do interpret --no-wildcards option right(#510714)


author: Peter Vrabec <pvrabec@redhat.com> 2:1.15.1-23
changelog:
  - Fix default ACLs on files problem. Header fixes. root => trusted.
  - Fix NIL termination for ACLs.
  - Fix star/POSIX compat. for ACLs
  - Resolves: #221971
  - all fixes made by james.antill@redhat.com


author: Peter Vrabec <pvrabec@redhat.com> 1.15.90-4
changelog:
  - fix problem with unpacking archives in a directory for which 
    one has write permission but does not own (such as /tmp) (#149686)


author: Peter Vrabec <pvrabec@redhat.com> 1.15.1-12
changelog:
  - fix extracting sparse files to a filesystem like vfat,
    when ftruncate may fail to grow the size of a file.(#179507)


author: Peter Vrabec <pvrabec@redhat.com> 1.15.1-5
changelog:
  - extract sparse files even if the output fd is not seekable.(#154882)
  - (sparse_scan_file): Bugfix. offset had incorrect type.


author: Bernhard Rosenkraenzer <bero@redhat.com> 1.13.19-5
changelog:
  - Fix build with current autoconf (stricter checking on AC_DEFINE)
  - Fix segfault when tarring directories without having read permissions
    (#40802)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - fix hang on tar tvzf - <something.tar.gz, introduced by
    exit code fix (Bug #15448), Patch from Tim Waugh <twaugh@redhat.com>


author: Bernhard Rosenkranzer <bero@redhat.com>
changelog:
  - 1.13.14
  - Update man page to know about -I / --bzip
  - Remove dependancy on rmt - tar can be used for anything local
    without it.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to tar-1.12.64013.
  - subtract (and reopen #2415) bzip2 support using -y.
  - move gtar to /bin.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - Fiddle bindir/libexecdir to get RH install correct.
  - Don't include /sbin/rmt -- use the rmt from dump.
  - Turn on nls.


author: Mike A. Harris <mharris@redhat.com> 1:1.0.0-1
changelog:
  - Updated to xauth 1.0.0 from X11R7 RC4
  - Changed manpage dir from man1x to man1 to match upstream default.


author: Mike A. Harris <mharris@redhat.com> 1:0.99.2-1
changelog:
  - Updated to xauth 0.99.2 from X11R7 RC2
  - Added Epoch 1 to package, to be able to change the version number from the
    X11R7 release number to the actual twm version.
  - Rename mkxauth manpage to mkxauth.1x


author: Brent Fox <bfox@redhat.com> 1.2.1-1
changelog:
  - renamed from redhat-config-keyboard
  - add Obsoletes for redhat-config-keyboard
  - make changes for Python2.3


author: Brent Fox <bfox@redhat.com> 1.0.3-1
changelog:
  - add a us keymap to keymaps with non-latin chars (bug #82440)
  - write out the XkbVariant line if it is present
  - handle XkbOptions to allow toggling between keymaps


author: Brent Fox <bfox@redhat.com> 0.9.2-1
changelog:
  - Wrap the destroy call in a try/except because there is no self.mainWindow in firstboot reconfig mode


author: Kristian Høgsberg <krh@redhat.com> - 1:1.0.2-4
changelog:
  - Fix root priv elevation bug (242903).  Just don't delete the
    directory and make sure when we create the directory, that we set
    the mode using mkdir -m.


author: Mike A. Harris <mharris@redhat.com> 1:1.0.2-3
changelog:
  - Added xfs documentation to doc macro.
  - Use "make install" instead of makeinstall macro.
  - Clean up source file URLs.


author: Mike A. Harris <mharris@redhat.com> 1:1.0.1-2
changelog:
  - Removed invocation of fc-cache from xfs initscript for bug (#179362)
  - Redirect stderr to /dev/null to squelch an unwanted error xfs.init (#155349)
  - Replace "s#^/.*:[a-z]*$##g" with "s#:unscaled$##g" in xfs.init for (#179491)
  - Cosmetic cleanups to spec file to satiate the banshees.


author: Mike A. Harris <mharris@redhat.com> 1:1.0.0-1
changelog:
  - Updated all tarballs to version 1.0.0 from X11R7 RC4.
  - Get default X font directory with font-utils package 'fontdir' pkgconfig
    variable.
  - Change manpage dir from man1x back to man1 to match upstream.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-3
changelog:
  - Updated xfs pre script to check for the existance of the old monolithic
    /usr/X11R6/lib/X11/fs/config xfs config file, and set a migration flag
    file.
  - Updated xfs.init to check for the existance of the migration flag file,
    and perform an xfs 'restart' instead of a 'reload' if migrating.  Users
    will now have to restart their X server, or reconnect the xfs server to
    the X server after a migration to modular X.
  - Changed upgrade comparison typo from 2 to 1 in xfs post script.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-2
changelog:
  - Added temporary "BuildRequires: libXfont-devel >= 0.99.2-3" and
    "Requires: libXfont-devel >= 0.99.2-3" to ensure early-testers of
    pre-rawhide modular X have installed the work around for (#172997).


author: Mike A. Harris <mharris@redhat.com> 0.99.2-1
changelog:
  - Updated to xfs-0.99.2 and fstobdf-0.99.2 from X11R7 RC2
  - Added Epoch 1 to package, and set the version number to the xfs 0.99.2
    version.


author: Mike A. Harris <mharris@redhat.com> 6.99.99.901-1
changelog:
  - Updated all packages to version 0.99.1 from X11R7 RC1.
  - Bump package version to 6.99.99.901 (the RC1 CVS tag).
  - Change manpage location to 'man1x' in file manifest.
  - Converted xfs.config to xfs.config.in, and added code to spec file to
    generate xfs.config depending on what the system _x11fontdir is.
  - Complete and total rewrite of xfs postinstall script to use "sed -i"
    and complete restructuring, which removed a lot of the super craptasticness
    that had been sitting there for years.


author: Mike A. Harris <mharris@redhat.com> 6.99.99.0-4
changelog:
  - Use Fedora-Extras style BuildRoot tag
  - Update BuildRequires to use new library package names
  - Remove unnecessary BuildRequires on 'install', and fix pkgconfig dep


author: Mike A. Harris <mharris@redhat.com> 6.99.99.0-3
changelog:
  - Install the initscript and xfs config file in the correct location as they
    were inadvertently interchanged in previous builds.


author: Mike A. Harris <mharris@redhat.com> 6.99.99.0-2
changelog:
  - Ported the xfs related rpm scripts over from monolithic packaging, and
    added up to date Requires(*) dependencies for all of them.
  - Flagged xfs config file as config(noreplace)
  - Added build and runtime dependencies to xfs subpackage as best as could be
    determined by analyzing ./configure output, and building in minimalized
    build root environment.


author: Akira TAGOH <tagoh@redhat.com> - 0.2.2-6
changelog:
  - scim-hangul-0.2.2-swap-keybinding.patch: swap the keybindings to move
    the cursor on the candidate window according to the candidate window's
    orientation.


author: Akira TAGOH <tagoh@redhat.com> - 0.2.2-3
changelog:
  - scim-hangul-0.2.2-ascii-mode.patch: applied to support the ASCII input mode
    in scim-hangul. (#185506)


author: Jens Petersen <petersen@redhat.com> - 0.2.1-3
changelog:
  - build conditionally with libstdc++so7 preview library (#166041)
    - add with_libstdc_preview switch and tweak libtool to link against newer lib
  - update filelist since moduledir is now api-versioned


author: Akira TAGOH <tagoh@redhat.com> - 0.2.0-5
changelog:
  - fixed the description of this package. (Ryo Dairiki)
  - scim-hangul-0.2.0-ignore-invisible-char.patch: applied to not commit any
    Hangul characters with the keys unrelated to Yetgeul. (#166138)


author: Alexander Larsson <alexl@redhat.com> 2.3.2-1
changelog:
  - update to 2.3.2
  - set default action to component for x-directory/smb-share to make
    smb shares work


author: Havoc Pennington <hp@redhat.com>
changelog:
  - ah, did not know about default_application_id. fix various things to
    work properly. also, change some unrelated stuff: bind openoffice to
    more file types, don't use gnumeric embedded control for gnumeric
    files.


author: Havoc Pennington <hp@redhat.com>
changelog:
  - don't try to view html in-place, use htmlview as default html viewer
  - remove mpg123 as a viewer, it's a command line app


author: Erik Troan <ewt@redhat.com>
changelog:
  - moved crontab jobs up a bit to make sure they aren't confused by
    switching to and fro daylight savings time


author: Lon Hohberger <lhh@redhat.com> 3.0-2.1
changelog:
  - Fix /etc/joe/joe/* sysconf dirs; the new Makefile.am handles this for us.
  - Ensure we reference correct directories in manpages and joe-configs.


author: Lon Hohberger <lhh@redhat.com> 3.0-1
changelog:
  - Import of 3.0 upstream.
  - Removed zero-rc patch for now; it doesn't correctly fix the
    problem.
  - Merge new SELinux patch from Dan Walsh.


author: Dan Walsh <lhh@redhat.com> 2.9.8-8
changelog:
  - Modify SELinux patch to only attempt change if the context is different
  - Change is_selinux_enabled to >0 check.


author: Lon Hohberger <lhh@redhat.com> 2.9.8-2
changelog:
  - Import from 2.9.8 upstream.  This eliminates most of the patches
  we maintained.  Added patch from #80657 from Hans de Goede.


author: Lon Hohberger <lhh@redhat.com> 2.9.7-8
changelog:
  - Cleaned up warnings on ppc/ia32/ia64.
  - Fixed help message.
  - Fixed bugs on ia64 and ppc architectures.
  - Fixed build bugs on ia64.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - 2.9.6 - someone's developing it again, on sourceforge
  - all patches absorbed or unnecesarry
  - add doc files and URL
  - use %configure and %makeinstall


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - added new patch for supporting big files (15+ MB). 
  - obsoleted one of our which is contained within the
    above patch


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - added new patch for resizing, by Seth Vidal
  - removed an old patch which did almost the same thing, 
    but not as well


author: Tomas Hoger <thoger@redhat.com> - 15.5-15.el5_3.4
changelog:
  - Merge incdir-overflow and snprintf patches for better readability,
    snprintf is used now with PATHLEN limit without other adjustments,
    related strlen / %.*s / *_len are no longer needed and were dropped
  - Update tempsec patch, drop extraneous s(n)printf argument
    to suppress compiler warnings
  - Update fscanf-overflows patch to perform reffile argument length
    check earlier, now also includes strlen-adjust-fix patch


author: Neil Horman <nhorman@redhat.com>
changelog:
  - Added cscope-indexer helper and xcscope lisp addon
  - Added man page for xcscope
  - Added triggers to add xcscope.el pkg to (x)emacs
  - Thanks to Ville, Michael and Jens for thier help :)


author: Neil Horman <nhorman@redhat.com>
changelog:
  - Added upstream ocs fix
  - Added feature to find symbol assignments
  - Changed default SYSDIR directory to /var/lib/cs
  - Incoproated M. Schwendt's fix for ocs -s


author: Lingning Zhang <lizhang@redhat.com> - 3.0.9-20.4
changelog:
  - modify "%post" and add "Requires(post)" in ttmkfdir.spec for fixing bug173591, bug207279, bug208122


author: Lingning Zhang <lizhang@redhat.com> - 3.0.9-20.1
changelog:
  - remove the modifying part of ttmkfdir-3.0.9/Makefile, recover the old Makefile
  - modify ttmkfdir-3.0.9-encoding-dir.patch about Makefile


author: Lingning Zhang <lizhang@redhat.com> - 3.0.9-20
changelog:
  - add ttmkfdir-3.0.9-encoding-dir.patch to fix bug #173705
  - modify ttmkfdir-3.0.9/Makefile to delete the compiling flag of "ggdb"


author: Jens Petersen <petersen@redhat.com> - 3.0.9-17
changelog:
  - replace ttmkfdir-3.0.9-defautl_enc_size.patch and
    ttmkfdir-3.0.9-crashplus.patch with ttmkfdir-3.0.9-fix-crash.patch
    to fix missing native encodings of fonts
    (Akira Tagoh, #143941)
  - buildrequire flex
  - add ttmkfdir-3.0.9-warnings.patch to silence most of compiler warnings


author: Elliot Lee <sopwith@redhat.com> 3.0.9-13
changelog:
  - Follow-on fix for the issue detailed in #118713
  - Improve performance when checking if a font has a mapping present
  - Base font file selection on the magic at the start of the file, rather than the filename


author: Yu Shao <yshao@redhat.com> 3.0.9-8
changelog:
  - patch for building package against freetype-2.1.7
  - from kanagawa jigorou (jigorou3@mail.goo.ne.jp) #114682


author: Yu Shao <yshao@redhat.com> 3.0.5-1
changelog:
  - encoding.l fix and ttc support patch 
  - default read system encodings.dir instead of the one
  - in current directory


author: Mike A. Harris <mharris@devel.capslock.lan> 3.0.2-1
changelog:
  - Changed the nonstandard RPM Group from System/Utilities to Applications/System
  - Added a new Makefile install target, and changed specfile to use makeinstall


author: Mike A. Harris <mharris@devel.capslock.lan> 3.0.1-1
changelog:
  - Imported ttmkfdir into CVS on cvs.devel and applied all patches to CVS
  - Removed patches from spec file
  - Rewrote Makefile, now uses freetype-config to autodetect CFLAGS and libs,
    allowing a lot of spec file cleanups.  Added new targets for tagging CVS,
    making tarball, and making srpm.


author: Mike A. Harris <mharris@devel.capslock.lan> 3.0.0-1
changelog:
  - Initial build.  Basically just renamed our existing ttmkfdir to version
    3.0.0 to differentiate it.  It's the same old thing as before, but is
    likely going to move to CVS for easier development.


author: Colin Walters <walters@redhat.com> 1.1.0-8
changelog:
  - New patch flac-1.1.0-gnu-stack.patch from Ulrich Drepper to mark asm
    as not requiring an executable stack


author: Warren Togami <wtogami@redhat.com> 1.1.0-4
changelog:
  - #119551 flac-xmms -> xmms-flac to match fedora.us and freshrpms.net
  - Obsoletes flac-libs to upgrade smoothly from fedora.us


author: Than Ngo <than@redhat.com> 2.0.13-4
changelog:
  - rebuilt against pilot-link-0.11.8
  - don't apply gnome-pilot-conduits-2.0.13-port-to-pilot-link-0.12.patch


author: David Malcolm <dmalcolm@redhat.com> - 2.0.13-3.FC5
changelog:
  - extend patch 2 to handle a missing fix in the email conduit, renaming it from
    gnome-pilot-conduits-2.0.12-port-to-pilot-link-0.12.patch to
    gnome-pilot-conduits-2.0.13-port-to-pilot-link-0.12.patch in the process 
    (#159165)


author: David Malcolm <dmalcolm@redhat.com> - 2.0.11-1
changelog:
  - update upstream tarball from 2.0.10 to 2.0.11
  - added more detailed version requirements on gnome-pilot/gnome-pilot-devel as imposed by the configuration script, version 2.0.11 is now required, rather than just 2.0


author: David Malcolm <dmalcolm@redhat.com> - 2.0.10-4
changelog:
  - Added patch by Justin M. Forbes <64bit_fedora@comcast.net> for proper libdir in .conduit files (#121268)


author: Marek Kasik <mkasik@redhat.com> - 1.9.2-3
changelog:
  - Add -fno-strict-aliasing flag
  - Change Requires of gail-devel to require correct gail
  - Resolves: bug #506561


author: Marek Kasik <mkasik@redhat.com> - 1.9.2-2
changelog:
  - Check GNOME_ACCESSIBILITY variable before printing message
  - about initialization of GTK Accessibility module
  - Resolves: bug #506561


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 0.17
  - word-wrap the description
  - move gtk modules to regular package not -devel
  - include gtk-doc documentation


author: Tom Lane <tgl@redhat.com> 08.01.0200-2
changelog:
  - Change library name back to psqlodbc.so, because it appears that upstream
    will revert to that name in next release; no point in thrashing the name.
  - Include documentation files unaccountably omitted before (bug #184158)


author: Tom Lane <tgl@redhat.com> 08.01.0200-1
changelog:
  - Update to version 08.01.0200.
  - Upstream now calls the library psqlodbcw.so ... add a symlink to avoid
    breaking existing odbc configuration files.


author: Matthew Barnes <mbarnes@redhat.com> - 2.2.0-1
changelog:
  - Update to 2.2.0
  - Update python-ldap-2.0.6-rpath.patch and rename it to
    python-ldap-2.2.0-dirs.patch.


author: Ville Skyttä <ville.skytta at iki.fi> 0:2.0.0-0.fdr.0.pre16.3
changelog:
  - Stricter python version requirements.
  - BuildRequire openssl-devel.
  - Explicitly build *.pyo, install them as %ghost.
  - Own more installed dirs.
  - Remove $RPM_BUILD_ROOT at start of %install.


author: Marcela Mašláňová <mmaslano@redhat.com> - 4:4.1-77
changelog:
  - fix setting of pam configuration in vixie-cron-4.1-loginuid.patch
  - move building environment between opening session and setting
  parameters of session
  - Resolves: rhbz#546568


author: Marcela Maslanova <mmaslano@redhat.com> - 4:4.1-76
changelog:
  - 222464 crond failed "Days of week" after a few hours on 1st/Jan
  - 241877 Cron does not handle home directories with group deny permissions
  - 455379 cron jobs for users without home doesn't work
  - Resolves: rhbz#241877, rhbz#222464, rhbz#455379


author: Marcela Maslanova <mmaslano@redhat.com> - 4:4.1-71
changelog:
  - added back patches removed for previous errata - 222461, 223532, 223894
  - Resolves: rhbz#222461, rhbz#223532, rhbz#223894


author: Marcela Maslanova <mmaslano@redhat.com> - 4:4.1-70
changelog:
  - removed last patches, added only CVE 235880. Removed 222461, 223532, 223894.
  - Resolves: rhbz#235880


author: Marcela Maslanova <mmaslano@redhat.com> - 4:4.1-64
changelog:
  - include system-auth for session in crond.pam, it now avoids
    using pam_unix if the process is crond


author: Jason Vas Dias <jvdias@redhat.com> - 4:4.1-58
changelog:
  - fix bug 199294: support for LSPP multiple per-job SELinux contexts
  - fix bug 198019: make database.c correct if crontab mtime changes 
                    while spool dir mtime does not.


author: Jason Vas Dias<jvdias@redhat.com> - 4.1-50.FC5
changelog:
  - fix bug 178436: prevent per-minute jobs being delayed into next minute
  - fix bug 178931: remove pam_unix and pam_krb5 from pam session stack


author: Jason Vas Dias<jvdias@redhat.com>
changelog:
  - fix bug 177476: make minder/mailer process run as job user 
    with user context; re-organize PAM and SELinux code


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-41.FC5
changelog:
  - patches for IBM LSPP testing:
  - Steve Grubb's patch to emit audit log message on crontab denial
  - Use of sendmail unacceptable for LSPP: provide -m <mail command> option


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-40.FC5
changelog:
  - *** NOTE : please do not modify vixie-cron without contacting ***
    *** the package maintainer (me at the moment).                ***
    *** Or at least test it first!                                ***
  - fix bug 170830: it was not the pam_stack change - the setuid
    mode of crontab was dropped for some reason.
  - apply Dan's new getseuserbyname patch
  - somehow build_env() invocation was dropped - use pam_env settings.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-39-FC5
changelog:
  - fix bug 170830: the last PAM change disabled all cron jobs.
    backing out the new PAM configuration file until I've had a
    chance to test it with replacement of pam_stack.so.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-36.FC4
changelog:
  - fix bug 162887: allow multiple /etc/cron.d crontabs for *system* user
  - further fix for bug 154920 / CAN-2005-1038 ( crontab -e ):
       invoke editor and copy operation as non-root user


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-FC4.34
changelog:
  - fix bug 160811: FC3 version compared >= FC4 version
  - fix bug 159216: add pam_loginuid support for new audit system


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-33_FC4
changelog:
  - fix bug 154922 / CAN-2005-1038: check that new crontab is 
        regular file after editor session ends.
  - fix bug 154575: use PATH_MAX (4096) as max filename length; also make 
        limits on command line and env.var. lengths sensible (131072).


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-30_FC4
changelog:
  - fix bug 154065: crontab's job control broken: by 
  -     xpid = waitpid(pid,&waiter,WUNTRACED);... 
  -     if( WIFSTOPPED(waiter) )... kill(getpid(),WSTOPSIG(waiter));
  - crontab should not kill itself with SIGSTOP if its child
  - gets SIGSTOP; hence it does not need the waitpid WUNTRACED flag.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-28_FC4
changelog:
  - Required for EAL Audit certification: 
  - If pam_setcred should fail, the pam_session could fail to be
  - closed, leaving autofs user directories still mounted.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-26_FC4
changelog:
  - fix bug 151145: segfault if cronjob runs without any SELinux user 
  - security context (eg. in a broken chroot environment)


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-24_FC4
changelog:
  - Add an /etc/sysconfig/crond file for containing CRONDARGS and
  - settings like CRON_VALIDATE_MAILRCPTS .


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-24_FC4
changelog:
  - Fix bug 147636 - disable silly mail recipient name checking 
  - (do_command.c's safe_p()) by default . Can be enabled by 
  - presence of CRON_VALIDATE_MAILRCPTS variable in crond's 
  - environment - also '_'s in MAILTOs are allowed.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-22
changelog:
  - Fix bug 146073 - allow the 'pam_access' module to be used with
  - cron - set 'PAM_TTY' item to 'cron' .


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-21
changelog:
  - fix bug 142953 : allow read-only crontabs + provide -p 
  - 'permit all crontabs' option to disable mode checking.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-19
changelog:
  - crontab -e should only strip NHEADER_LINES comments 
  - (NHEADER_LINES==0), not at least one header comment line.
  - (bug 135845)


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-17
changelog:
  - Users not allowed to use 'crontab mycrontab', while
  - 'crontab < mycrontab' allowed; this is because misc.c's
  - swap_uids_back() was not using save_euid / save_egid .
  - Thanks to Mads Martin Joergensen <mmj@suse.de> for pointing this out.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-16
changelog:
  - Just found out in testing that if neither /etc/cron.{deny,allow}
  - exist, root is unable to use crontab - I'm sure root could before,
  - but is in any case meant to be able to. Allowing root to use crontab.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-14
changelog:
  - Fix for bug 130102 got dropped somehow from latest CVS.
  - This is now restored - in %post, if neither /etc/cron.{deny,allow}
  - exist, touch /etc/cron.deny, to allow all users to use crontab,
  - as was previous default vixie-cron behaviour.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-12
changelog:
  - Merged Dan's patch with vixie-cron-4.1-11 which was not 
  - latest version according to new CVS ?!?!


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-11
changelog:
  - Fixed SIGSEGV in free_user when !is_selinux_enabled() and crontab
  - has no valid jobs (bug 131390).


author: Jason Vas Dias <jvdias@redhat.com> - 4.1.10
changelog:
  - Fixed bug 130102: Restored default behaviour if neither 
  - /etc/cron.deny nor /etc/cron.allow exist - 'touch /etc/cron.deny'
  - in %post


author: Jason Vas Dias <jvdias@redhat.com> - 4.1.8
changelog:
  - Allowed editors such as 'gedit' which do not modify original
  - file, but which rename(2) a temp file to original, to be used
  - by crontab -e (bug 129170).


author: Jason Vas Dias <jvdias@redhat.com> - 4.1.8
changelog:
  - Added documentation for '@' nicknames to crontab.5
  - (bugs 107542, 89899). Also removed 'second when' (bug 59802).


author: Jason Vas Dias <jvdias@redhat.com> - 4.1.6
changelog:
  - Added PAM 'auth sufficient pam_rootok.so' to /etc/pam.d/crond
  - (fixes bug 128843) - on dwalsh's advice.


author: Jason Vas Dias <jvdias@redhat.com> - 4.1-1
changelog:
  - Changed post-install to change mode of existing crontabs to
  - 0600 to allow run by new ISC cron 4.1


author: Jens Petersen <petersen@redhat.com> - 3.0.1-94
changelog:
  - add vixie-cron-3.0.1-cron-descriptors-125110.patch to close std descriptors
    when forking (Bernd Schmidt, 121280)
  - add vixie-cron-3.0.1-no-crontab-header-89809.patch to not prepend header to
    crontab files (Damian Menscher, 103899)
  - fix use of RETVAL in init.d script (Enrico Scholz, 97784)
  - add safer malloc call to vixie-cron-3.0.1-sprintf.patch 
  - add cron-3.0.1-crontab-syntax-error-114386.patch to fix looping on crontab
    syntax error (Miloslav Trmac, 89937)


author: Jens Petersen <petersen@redhat.com> - 3.0.1-82
changelog:
  - add vixie-cron-3.0.1-pie.patch to build crond as pie (#108414)
    [Ulrich Drepper]
  - require libselinux and buildrequire libselinux-devel


author: Jens Petersen <petersen@redhat.com> - 3.0.1-80
changelog:
  - add vixie-cron-3.0.1-vfork-105616.patch to use fork instead of vfork
    (#105616) [report and patch from ian@caliban.org]
  - update vixie-cron-3.0.1-redhat.patch not to change DESTMAN redundantly
    (it is overrriden in the spec file anyway)


author: Jens Petersen <petersen@redhat.com> - 3.0.1-75
changelog:
  - add vixie-cron-3.0.1-root_-u-85879.patch from Valdis Kletnieks to allow
    root to run "crontab -u <user>" even for users that aren't allowed to


author: Nalin Dahyabhai <nalin@redhat.com> 3.0.1-72
changelog:
  - adjust cron.d patch so that it ignores file with names that begin with '#'
    or end with '~', '.rpmorig', '.rpmsave', or '.rpmnew'
  - merge hunk of buffer overflow patch into the cron.d patch


author: Bill Nottingham <notting@redhat.com>
changelog:
  - log as 'crond', not 'CROND' (#19410)
  - account for shifts in system clock (#23230, patch from <pererik@onedial.se>)
  - i18n-ize initscript


author: Than Ngo <than@redhat.com>
changelog:
  - add /sbin/service to Prereq
  - call /sbin/service instead service
  - fix startup position (Bug #13353)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - fix crond logging patch (dan@doom.cmc.msu.ru)
  - log via syslog (suggestion from jos@xos.nl)
  - put system crontab location in crontab(5) (#14842)


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - added a patch to get rid of the dangerous sprintf() calls
  - added BuildRoot and Prereq: /sbin/chkconfig


author: Karel Zak <kzak@redhat.com> 3-5
changelog:
  - replace word list with much better Moby Project words list (#61395)
  - revise %description; ispell/aspell no longer uses words


author: Tim Waugh <twaugh@redhat.com> - 0.6.2-5.2
changelog:
  - Initialize locale when setting page size from locale (bug #221871).  If
    locale is not set by HAL, fetch it from i18n sysconfig file.


author: Tim Waugh <twaugh@redhat.com> - 0.6.2-5.1
changelog:
  - Use correct page size in locales that do not use US Letter (bug #221871).
    Requires system-config-printer-libs >= 0.7.32.6.


author: Florian Festi <ffesti@redhat.com> - 0.6.1-1
changelog:
  - bump to 0.6.1 (fixed hal policy file)
  - added dummy init script for cups-config-daemon to fix the postun
    script of the 0.5.5 version


author: John (J5) Palmieri <johnp@redhat.com> - 0.5.3-1
changelog:
  - Add a build reqiures and requires for dbus >= 0.31
  - Rebuild with HAL 0.5.0 and D-BUS 0.31
  - Add hal fdi file to match printers to the hal_lpadmin callout


author: John (J5) Palmieri <johnp@redhat.com> - 0.5.2-11
changelog:
  - Added get_udi_from_env patch which gets the UDI of the printer
    from the UDI env variable set by hal if the UDI is not given on 
    the command line
  - Made sure fdi file installs in correct place and executes hal_lpadmin
    correctly
  - changed the check if printer code to check string lists now


author: John (J5) Palmieri <johnp@redhat.com> - 0.5.2-9
changelog:
  - For some reason -8 was never built into rawhide.  Bumping the 
    release to 9 and rebuilding for smooth upgrade from fc3


author: John (J5) Palmieri <johnp@redhat.com> - 0.5.2-8
changelog:
  - use_usb_if_null patch makes sure that the make and model of the 
    printer is never null even if hal does not populate the
    printer.vendor and info.product fields.  (Bug #136666)
  - (printer_update.hal, printer_remove.hal): Use $UDI instead of 
    $HAL_PROP_INFO_UDI which in some instances may not be populated


author: John (J5) Palmieri <johnp@redhat.com> - 0.5.2-6
changelog:
  - Add Colin Walter's daemon patch
  - Add BuildRequires for glib
  - Add patch to take out gdk from configure.in
  - Restart cups-config-daemon in the post


author: John (J5) Palmieri <johnp@redhat.com>
changelog:
  - Patch now calls killall -SIGHUP cupsd if pid file is wrong or does not exist.
    This is mainly for older cups versions which do not output a pid file.


author: Jindrich Novy <jnovy@redhat.com>
changelog:
  - add hardlink man page
  - add -h option
  - use _sbindir instead of /usr/sbin directly
  - don't warn because of uninitialized variable
  - spec cleanup


author: Karel Zak <kzak@redhat.com> 2.13-0.50
changelog:
  - re-fix #240131 - mkfs:bug in mkfs man page (fix typo)
  - re-fix #427183 - in repair mode, mount gives false information
  - re-fix #446648 - obsolete info in fdisk(8) man page (fix typo)


author: Karel Zak <kzak@redhat.com> 2.13-0.48
changelog:
  - fix #203869 - RHEL5: login segfaults on EOF
  - fix #456378 - RHEL5: audit log injection attack via login
  - fix #449777 - /usr/bin/logger cannot be used when /usr non-root partition
  - fix #249438 - man fstab refers to fstab-sync
  - fix #240131 - mkfs:bug in mkfs man page
  - fix #446648 - obsolete info in fdisk(8) man page
  - fix #447265 - VMware fdisk partitions
  - fix #354791 - blockdev command calls the blkpg ioctl with a wrong data structure
  - fix #444650 - mkswap defaults to v0 format on ppc64
  - fix #458437 - "swapon -a" does not complain about missing devices
  - fix #449143 - fdisk fails to warn on large disks
  - fix #446971 - sfdisk issue on large hard drives
  - fix #239721 - script: result of 'COMMAND' cannot be logged in the file typescript
  - fix #427183 - in repair mode, mount gives false information


author: Karel Zak <kzak@redhat.com> 2.13-0.46
changelog:
  - fix #324471 - CVE-2007-5191 util-linux (u)mount doesn't drop privileges
                 properly when calling helpers


author: Karel Zak <kzak@redhat.com> 2.13-0.45
changelog:
  - fix #237659 - add -r option to losetup to create a read-only loop
  - fix #235495 - mount -f does not work with NFS-mounted file system
  - fix #234303 - src.rpm does't build
  - fix #228731 - sfdisk doesn't support DM-MP device (add default heads and sectors)
  - fix #231192 - ipcs is not printing correct values on pLinux
  - fix #245533 - translation files exist, but are not being used


author: Karel Zak <kzak@redhat.com> 2.13-0.43.3
changelog:
  - fix #219569 - smbfs -> cifs (upgrade from -pre6 to -pre7 upstream version)
  - fix #218915 - fdisk -b 4K
  - remove unused patches


author: Karel Zak <kzak@redhat.com> 2.13-0.43.1
changelog:
  - fix #211827 - Can't mount with additional contexts
  - fix #213127 - mount --make-unbindable does not work
  - fix #216489 - SCHED_BATCH option missing in chrt
  - fix #216712 - issues with raw device support
    (disable raw0 usage, move the raw command to /bin, update man page)
  - fix #216664 - we need to the raw script and configuration file


author: Karel Zak <kzak@redhat.com> 2.13-0.43
changelog:
  - fix #209911 - losetup.8 updated (use dm-crypt rather than deprecated cryptoloop)
  - fix #210338 - spurious error from '/bin/login -h $PHONENUMBER' (bug in IPv6 patch)
  - fix #208634 - mkswap "works" without warning on a mounted device


author: Karel Zak <kzak@redhat.com> 2.13-0.42
changelog:
  - remove obsolete NFS code and patches (we use /sbin/mount.nfs
    and /sbin/umount.nfs from nfs-utils now)
  - move nfs.5 to nfs-utils


author: Karel Zak <kzak@redhat.com> 2.13-0.41
changelog:
  - fix #205038 - mount not allowing sloppy option (exports "-s"
    to external /sbin/mount.nfs(4) calls) 
  - fix minor bug in util-linux-2.13-mount-twiceloop.patch
  - fix #188193- util-linux should provide plugin infrastructure for HAL


author: Karel Zak <kzak@redhat.com> 2.13-0.40
changelog:
  - fix Makefile.am in util-linux-2.13-mount-context.patch
  - fix #201343 - pam_securetty requires known user to work
                  (split PAM login configuration to two files)
  - fix #203358 - change location of taskset binary to allow for early affinity work


author: Karel Zak <kzak@redhat.com> 2.13-0.32
changelog:
  - add IPv6 support to the login command (patch by Milan Zazrivec)
  - fix #198626 - add keyinit instructions to the login PAM script 
    (patch by David Howells)


author: Karel Zak <kzak@redhat.com> 2.13-0.25
changelog:
  - fix #187014 - umount segfaults for normal user
  - fix #183446 - cal not UTF-8-aware
  - fix #186915 - mount does not translate SELIinux context options though libselinux
  - fix #185500 - Need man page entry for -o context= mount option
  - fix #152579 - missing info about /etc/mtab and /proc/mounts mismatch
  - fix #183890 - missing info about possible ioctl() and fcntl() problems on NFS filesystem
  - fix #191230 - using mount --move results in wrong data in /etc/mtab
  - added mount subtrees support
  - fdisk: wrong number of sectors for large disks (suse#160822)
  - merge fdisk-xvd (#182553) with new fdisk-isfull (#188981) patch 
  - fix #181549 - raw(8) manpage has old information about dd
  - remove asm/page.h usage


author: Dan Walsh <dwalsh@RedHat.com> 2.13-0.24
changelog:
  - Remove requirement on restorecon, since we can do the same thing
  - with chcon/matchpathcon, and not add requirement on policycoreutils


author: Steve Dickson <steved@redhat.com> 2.13-0.21
changelog:
  - fix #183713 - foreground mounts are not retrying as advertised
  - fix #151549 - Added 'noacl' mount flag
  - fix #169042 - Changed nfsmount to try udp before using tcp when rpc-ing
                  the remote rpc.mountd (iff -o tcp is not specified).
                  This drastically increases the total number of tcp mounts
                  that can happen at once (ala autofs).


author: Jesse Keating <jkeating@redhat.com> 2.13-0.20
changelog:
  - Better calling of restorecon as suggested by Bill Nottingham
  - prereq restorecon to avoid ordering issues


author: Karel Zak <kzak@redhat.com> 2.13-0.16
changelog:
  - fix #181782 - mkswap should automatically add selinux label to swapfile
  - fix #180730 - col is exiting with 1 (fix util-linux-2.12p-col-EILSEQ.patch)
  - fix #181896 - broken example in schedutils man pages
  - fix #177331 - login omits pam_acct_mgmt & pam_chauthtok when authentication is skipped.
  - fix #177523 - umount -a should not unmount sysfs
  - fix #182553 - fdisk -l inside xen guest shows no disks


author: Steve Dickson <steved@redhat.com> 2.13-0.14
changelog:
  - Updated the gssd_check() and idmapd_check(), used with
    nfsv4 mounts, to looked for the correct file in /var/lock/subsys
    which stops bogus warnings.


author: Karel Zak <kzak@redhat.com> 2.13-0.13
changelog:
  - fix #174676 - hwclock audit return code mismatch
  - fix #176441: col truncates data
  - fix #174111 - mount allows loopback devices to be mounted more than once to the same mount point
  - better wide chars usage in the cal command (based on the old 'moremisc' patch)


author: Karel Zak <kzak@redhat.com> 2.13-0.11.pre6
changelog:
  - update to upstream version 2.13-pre6
  - fix #172203 - mount man page in RHEL4 lacks any info on cifs mount options


author: Karel Zak <kzak@redhat.com> 2.13-0.6.pre5
changelog:
  - update to upstream 2.13pre5
  - remove separated cramfs1.1 (already in upstream package)
  - remove odd symlink /usr/bin/mkcramfs -> ../../sbin/mkfs.cramfs
  - fix #170171 - ipcs -lm always report "max total shared memory (kbytes) = 0"


author: Karel Zak <kzak@redhat.com> 2.13-0.4.pre4
changelog:
  - fix #169628 - /usr/bin/floppy doesn't work with /dev/fd0
  - fix #168436 - login will attempt to run if it has no read/write access to its terminal
  - fix #168434 - login's timeout can fail - needs to call siginterrupt(SIGALRM,1)
  - fix #165253 - losetup missing option -a [new feature]
  - update PAM files (replace pam_stack with new "include" PAM directive)
  - remove kbdrate from src.rpm
  - update to 2.13pre4


author: Steve Dickson <steved@redhat.com> 2.13-0.3.pre3
changelog:
  - fix #170110 - Documentation for 'rsize' and 'wsize' NFS mount options
                  is misleading


author: Karel Zak <kzak@redhat.com> 2.13-0.3.pre2
changelog:
  - fix #166923 - hwclock will not run on a non audit-enabled kernel
  - fix #159410 - mkswap(8) claims max swap area size is 2 GB
  - fix #165863 - swsusp swaps should be reinitialized
  - change /var/log/lastlog perms to 0644


author: Karel Zak <kzak@redhat.com> 2.13-0.2.pre2
changelog:
  - /usr/share/misc/getopt/* -move-> /usr/share/doc/util-linux-2.13/getopt-*
  - the arch command marked as deprecated
  - removed: elvtune, rescuept and setfdprm
  - removed: man8/sln.8 (moved to man-pages, see #10601)
  - removed REDAME.pg and README.reset
  - .spec file cleanup
  - added schedutils (commands: chrt, ionice and taskset)


author: Karel Zak <kzak@redhat.com> 2.12p-9.7
changelog:
  - fix #159339 - util-linux updates for new audit system
  - fix #158737 - sfdisk warning for large partitions, gpt
  - fix #150912 - Add ocfs2 support
  - NULL is better than zero at end of execl()


author: Karel Zak <kzak@redhat.com> 2.12p-9.5
changelog:
  - fix #157656 - CRM 546998: Possible bug in vipw, changes permissions of /etc/shadow and /etc/gshadow
  - fix #159339 - util-linux updates for new audit system (pam_loginuid.so added to util-linux-selinux.pamd)
  - fix #159418 - sfdisk unusable - crashes immediately on invocation
  - fix #157674 - sync option on VFAT mount destroys flash drives
  - fix .spec file /usr/sbin/{hwclock,clock} symlinks


author: Karel Zak <kzak@redhat.com> 2.12p-8
changelog:
  - fix #154498 - util-linux login & pam session
  - fix #155293 - man 5 nfs should include vers as a mount option
  - fix #76467 - At boot time, fsck chokes on LVs listed by label in fstab
  - new Source URL
  - added note about ATAPI IDE floppy to fdformat.8
  - fix #145355 - Man pages for fstab and fstab-sync in conflict


author: Karel Zak <kzak@redhat.com> 2.12p-4
changelog:
  - added /var/log/lastlog to util-linux (#151635)
  - disabled 'newgrp' in util-linux (enabled in shadow-utils) (#149997, #151613)
  - improved mtab lock (#143118)
  - fixed ipcs typo (#151156)
  - implemented mount workaround for duplicated labels (#116300)


author: Elliot Lee <sopwith@redhat.com> 2.12p-1
changelog:
  - Update to util-linux-2.12p. This changes swap header format
    from - you may need to rerun mkswap if you did a clean install of
    FC3.


author: Steve Dickson <SteveD@RedHat.com> 2.12a-18
changelog:
  - Made NFS mounts adhere to the IP protocol if specified on
    command line as well as made NFS umounts adhere to the
    current IP protocol. Fix #140016


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Updated the NFS and NFS4 code to the latest CITI patch set
    (in which they incorporate a number of our local patches).


author: Elliot Lee <sopwith@redhat.com> 2.12a-6
changelog:
  - Fix #16415, #70616 with rdevman.patch
  - Fix #102566 with loginman.patch
  - Fix #104321 with rescuept.patch (just use plain lseek - we're in _FILE_OFFSET_BITS=64 land now)
  - Fix #130016 - remove raw.
  - Re-add agetty (replacing it with mgetty is too much pain, and mgetty is much larger)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Made the NFS security checks more explicit to avoid confusion
    (an upstream fix)
  - Also removed a compilation warning


author: Alasdair Kergon <agk@redhat.com>
changelog:
  - Add device-mapper mount-by-label support
  - Fix segfault in mount-by-label when a device without a label is present.


author: <SteveD@RedHat.com>
changelog:
  - Updated the nfs-mount.patch to correctly 
    handle the mounthost option and to ignore 
    servers that do not set auth flavors


author: <SteveD@RedHat.com>
changelog:
  - Make RPC error messages displayed with -v argument
  - Added two checks to the nfs4 path what will print warnings
    when rpc.idmapd and rpc.gssd are not running
  - Ping NFS v4 servers before diving into kernel
  - Make v4 mount interruptible which also make the intr option on by default


author: <SteveD@RedHat.com>
changelog:
  - Reworked how the rpc.idmapd and rpc.gssd checks were
    done due to review comments from upstream.
  - Added rpc_strerror() so the '-v' flag will show RPC errors.


author: <SteveD@RedHat.com>
changelog:
  - Added two checks to the nfs4 path what will print warnings
    when rpc.idmapd and rpc.gssd are not running.


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added pesudo flavors for nfsv4 mounts.
  - Added BuildRequires: libselinux-devel and Requires: libselinux
    when WITH_SELINUX is set.


author: Elliot Lee <sopwith@redhat.com> 2.11y-31
changelog:
  - Add patch140 (alldevs) to fix #101772. Printing the total size of
    all devices was deemed a lower priority than having all devices
    (e.g. /dev/ida/c0d9) displayed.


author: Elliot Lee <sopwith@redhat.com> 2.11y-1
changelog:
  - Update to 2.11y
  - Fix #80953
  - Update patch0, patch107, patch117, patch120 for 2.11y
  - Remove patch60, patch61, patch207, patch211, patch212, patch119, patch121
  - Remove patch122, patch200


author: Elliot Lee <sopwith@redhat.com> 2.11w-2
changelog:
  - Remove some crack/unnecessary patches while submitting stuff upstream.
  - Build with -D_FILE_OFFSET_BITS=64


author: Elliot Lee <sopwith@redhat.com> 2.11n-19
changelog:
  - Make a note here that this package was the source of the single change 
  contained in util-linux-2.11f-18 (in 7.2/Alpha), and also contains the 
  rawman patch from util-linux-2.11f-17.1 (in 2.1AS).
  - Package has no runtime deps on slang, so remove the BuildRequires: 
  slang-devel.


author: Elliot Lee <sopwith@redhat.com> 2.11n-17
changelog:
  - Fix teg's swapondetect patch to not print out the usage message when 
  'swapon -a -e' is run. (#66690) (edit existing patch)
  - Apply hjl's utmp handling patch (#66950) (patch116)
  - Fix fdisk man page notes on IDE disk partition limit (#64013) (patch117)
  - Fix mount.8 man page notes on vfat shortname option (#65628) (patch117)
  - Fix possible cal overflow with widechars (#67090) (patch117)


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - adjust mainframe patches to apply to current rpm
  - do not include fdisk until it is fixed to work on mainframe


author: Elliot Lee <sopwith@redhat.com> 2.11n-10
changelog:
  - Finish fixing #60675 (ipcrm man page), updated the patch.
  - Fix #61203 (patch114 - dumboctal.patch).


author: Elliot Lee <sopwith@redhat.com> 2.11n-7
changelog:
  Fix various bugs:
  - Add patch110 (skipraid) to properly skip devices that are part of a RAID array.
  - Add patch111 (mkfsman) to update the mkfs man page's "SEE ALSO" section.
  - remove README.cfdisk
  - Include partx
  - Fix 54741 and related bugs for good(hah!) with patch113 (ctty3)


author: Elliot Lee <sopwith@redhat.com> 2.11n-3
changelog:
  - Add util-linux-2.11n-ownerumount.patch (#56593)
  - Add patch102 (util-linux-2.11n-colrm.patch) to fix #51887
  - Fix #53452 nits.
  - Fix #56953 (remove tunelp on s390)
  - Fix #56459, and in addition switch to using sed instead of perl.
  - Fix #58471
  - Fix #57300
  - Fix #37436
  - Fix #32132


author: Elliot Lee <sopwith@redhat.com> 2.11f-17
changelog:
  - Add patch38 (util-linux-2.11f-ctty2.patch) to ignore SIGINT/SIGTERM/SIGQUIT in the parent, so that ^\ won't break things.


author: Elliot Lee <sopwith@redhat.com> 2.11f-16
changelog:
  - Merge patches 36, 75, 76, and 77 into patch #37, to attempt resolve all the remaining issues with #54741.


author: Elliot Lee <sopwith@redhat.com> 2.11f-13
changelog:
  - Patch/idea #76 from HJL, fixes bug #54741 (race condition in login 
  acquisition of controlling terminal).


author: Bill Nottingham <notting@redhat.com>
changelog:
  - revert the patch that calls setsid() in login that we had reverted
    locally but got integrated upstream (#46223)


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.11b-1
changelog:
  - Fix up login for real (a console session should be the controlling tty)
    by reverting to 2.10s code (#36839, #36840, #39237)
  - Add man page for agetty (#39287)
  - 2.11b, while at it


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.11a-3
changelog:
  - Fix up login - exiting immediately even if the password is correct
    is not exactly a nice feature.
  - Make definite plans to kill people who update login without checking
    if the new version works ;)


author: Erik Troan <ewt@redhat.com>
changelog:
  - upgraded to 2.11a (kbdrate moved to kbd, among other things)
  - turned off ALLOW_VCS_USE
  - modified mkcramfs to not use a large number of file descriptors
  - include mkfs.bfs


author: Matt Wilson <msw@redhat.com>
changelog:
  - changed Requires: kernel >= 2.2.12-7 to Conflicts: kernel < 2.2.12-7
    (fixes a initscripts -> util-linux -> kernel -> initscripts prereq loop)


author: Matt Wilson <msw@redhat.com>
changelog:
  - patched mkcramfs to use the PAGE_SIZE from asm/page.h instead of hard
    coding 4096 (fixes mkcramfs on alpha...)


author: Tim Powers <timp@redhat.com>
changelog:
  - fixed bug #29131, where ipc.info didn't have an info dir entry,
    added the dir entry to ipc.texi (Patch58)


author: Erik Troan <ewt@redhat.com>
changelog:
  - updated kill man page
  - added patch to fix vipw race
  - updated vipw to edit /etc/shadow and /etc/gshadow, if appropriate
  - added patch to disassociate login from tty, session, and pgrp


author: Erik Troan <ewt@redhat.com>
changelog:
  - fixed problem w/ empty extended partitions
  - added patch to fix the date in the more man page
  - set OPT to pass optimization flags to make rather then RPM_OPT_FLAG
  - fixed fdisk -l /Proc/partitions parsing
  - updated to 2.10s


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 2.10o
  -  fdformat: fixed to work with kernel 2.4.0test6 (Marek Wojtowicz)
  -  login: not installed suid
  -  getopt: by default install aux files in /usr/share/misc
  - update to 2.10n:
  -  added blockdev.8
  -  change to elvtune (andrea)
  -  fixed overrun in agetty (vii@penguinpowered.com)
  -  shutdown: prefer umounting by mount point (rgooch)
  -  fdisk: added plan9
  -  fdisk: remove empty links in chain of extended partitions
  -  hwclock: handle both /dev/rtc and /dev/efirtc (Bill Nottingham)
  -  script: added -f (flush) option (Ivan Schreter)
  -  script: added -q (quiet) option (Per Andreas Buer)
  -  getopt: updated to version 1.1.0 (Frodo Looijaard)
  -  Czech messages (Jiri Pavlovsky)
  - login.1 man page had not /var/spool/mail path (#16998).
  - sln.8 man page (but not executable) included (#10601).
  - teach fdisk 0xde(Dell), 0xee(EFI GPT), 0xef(EFI FAT) partitions (#17610).


author: Matt Wilson <msw@redhat.com>
changelog:
  - use snprintf - not sprintf - when doing
    sprintf ("%s\n", _("Some string")) to avoid overflows and
    segfaults.


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - raw control file was /dev/raw, now /dev/rawctl.
  - raw access files were /dev/raw*, now /dev/raw/raw*.


author: Matt Wilson <msw@redhat.com>
changelog:
  - updated to util-linux 2.10c
  - deprecated IMAP login mail notification patch17
  - deprecated raw patch22
  - depricated readprofile patch24


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - hostid is now in sh-utils. On sparc, install hostid as sunhostid (#4581).
  - update to 2.9w:
  -  Updated mount.8 (Yann Droneaud)
  -  Improved makefiles
  -  Fixed flaw in fdisk


author: Christian 'Dr. Disk' Hechelmann <drdisk@tc-gruppe.de>
changelog:
  - added locale message catalogs to %file
  - added patch for non-root build
  - vigr.8 and /usr/lib/getopt  man-page was missing from file list
  - /etc/fdprm really is a config file


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 2.9v:
  -   cfdisk no longer believes the kernel's HDGETGEO
      (and may be able to partition a 2 TB disk)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 2.9u:
  -   Czech more.help and messages (Jiri Pavlovsky)
  -   Japanese messages (Daisuke Yamashita)
  -   fdisk fix (Klaus G. Wagner)
  -   mount fix (Hirokazu Takahashi)
  -   agetty: enable hardware flow control (Thorsten Kranzkowski)
  -   minor cfdisk improvements
  -   fdisk no longer accepts a default device
  -   Makefile fix


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 2.9t:
  -   national language support for hwclock
  -   Japanese messages (both by Daisuke Yamashita)
  -   German messages and some misc i18n fixes (Elrond)
  -   Czech messages (Jiri Pavlovsky)
  -   wall fixed for /dev/pts/xx ttys
  -   make last and wall use getutent() (Sascha Schumann)
      [Maybe this is bad: last reading all of wtmp may be too slow.
       Revert in case people complain.]
  -   documented UUID= and LABEL= in fstab.5
  -   added some partition types
  -   swapon: warn only if verbose


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - include sfdisk (#1164)
  - fix write (#1784)
  - use positive logic in spec file (%ifarch rather than %ifnarch).
  - (re)-use 1st matching utmp slot if search by mypid not found.
  - update to 2.9o
  - lastb wants bad logins in wtmp clone /var/run/btmp (#884)


author: Jakub Jelinek <jj@ultra.linux.cz>
changelog:
  - if hwclock is to be compiled on sparc,
    it must actually work. Also, it should obsolete
    clock, otherwise it clashes.
  - limit the swap size in mkswap for 2.2.1+ kernels
    by the actual maximum size kernel can handle.
  - fix kbdrate on sparc, patch by J. S. Connell
    <ankh@canuck.gen.nz>


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - .perms patch to login to make it retain root in parent process
    for pam_close_session to work correctly


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - patch top build on the arm without PAM and related utilities, for now.
  - build hwclock only on intel


author: Erik Troan <ewt@redhat.com>
changelog:
  - updated MCONFIG to automatically determine the architecture
  - added glibc header hacks to fdisk code
  - rdev is only available on the intel


author: Erik Troan <ewt@redhat.com>
changelog:
  - Merged Red Hat changes into main util-linux source, updated package to
    development util-linux (nearly 2.7).


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - pam.patch differentiated between different kinds of bad logins.
    In particular, "user does not exist" and "bad password" were treated
    differently.  This was a minor security hole.


author: Tim Waugh <twaugh@redhat.com> 1.73-3
changelog:
  - Conflict with docbook-utils if its custom stylesheet hasn't been
    updated to work with version 1.72 or later of this package.


author: Tim Waugh <twaugh@redhat.com> 1.64-1
changelog:
  - 1.64 (fixes #38095).
  - Fix up post/preun scripts so that we don't get duplicate entries with
    different versions on upgrade.


author: Tim Waugh <twaugh@redhat.com> 1.59-10
changelog:
  - Fix up Makefile (patch from SATO Satoru).
  - Change postun to preun.
  - Make preun conditional on remove rather than upgrade.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Change Requires(...) to PreReq at Preston's request.
  - PreReq at least openjade-1.3-12, so that its catalogs get installed.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Don't play so many macro games.
  - Change requirement on /usr/bin/install-catalog to sgml-common.
  - Be sure to own dsssl-stylesheets-1.59 directory.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Change group.
  - openjade not jade.
  - %{_tmppath}.
  - rm before install.
  - Change Copyright: to License:.
  - Remove Packager: line.


author: Mike A. Harris <mharris@redhat.com> 1.0.2-2
changelog:
  - Replace "makeinstall" with "make install DESTDIR=..." for (#192720)
  - Remove package ownership of mandir/libdir/etc.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-1
changelog:
  - Updated libXfontcache to version 0.99.2 from X11R7 RC3
  - Added "Requires(pre): xorg-x11-filesystem >= 0.99.2-3", to ensure
    that /usr/lib/X11 and /usr/include/X11 pre-exist.
  - Removed 'x' suffix from manpage directories to match RC3 upstream.
  - Added new manpages to file manifest.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Make tetex a %post requirement.
  - Silence %post output.
  - Don't play so many macro games.
  - Build requires unzip.


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Change group.
  - Require openjade not jade.
  - rm before install.
  - Use %{_tmppath}.
  - Require tetex-latex.
  - Change Copyright: to License:.
  - Remove Packager: line.


author: Miroslav Lichvar <mlichvar@redhat.com> - 2.0.6-1
changelog:
  - update to slang-2.0.6
  - move .so.2 link to main package
  - don't package static library and utf8 link
  - remove requires for libtool and libtermcap
  - rearrange doc files (#191583)


author: Petr Raszyk <praszyk@redhat.com> - 2.0.5-5
changelog:
  - A patch by Bill Nottingham <notting@redhat.com>
    (#174761). slang-LANG.patch
    slang reads automatically sh-env-variable LANG.


author: Chris Lumens <clumens@redhat.com> 2.6.19.7-1
changelog:
  - Don't keep the .desktop file in version control.
    Resolves: rhbz#452780
  - Use the timezone list provided by system-config-date.
    Resolves: rhbz#445194


author: Chris Lumens <clumens@redhat.com> 2.6.19.3-1
changelog:
  - Fix adding partitions under the Auto heading.
    Related: rhbz#305271
  - Don't destroy the save dialog when it's closed.
  - If the key checkbutton is not active, remove the key setting.
    Related: rhbz#226718
  - Handle pykickstart exceptions by popping up a helpful dialog
    Resolves: rhbz#431567
  - Fix typo in LDAP authconfig parameter.
    Related: rhbz#232664


author: Chris Lumens <clumens@redhat.com> 2.6.19.2-1
changelog:
  - Support package selection through the RHN plugin if available (#217165).
  - Fix iterating over partitions (#305271).
  - Add support for handling the registration key (#226718).
  - Add an option to specify the LDAP CA cert (#232664).
  - Set isCrypted to False when the encryption box is unchecked (#239817).
  - Fix a traceback causing package selection to always be disabled (#227969).


author: Chris Lumens <clumens@redhat.com> 2.6.19.1-1
changelog:
  - If package selection is disabled, don't forget whatever was in the
    original kickstart file (#217165).


author: Chris Lumens <clumens@redhat.com> 2.6.18-1
changelog:
  - Don't require a root password (#215190).
  - Disable package screen if yum couldn't download (#216439).


author: Chris Lumens <clumens@redhat.com> 2.6.15-1
changelog:
  - Don't need to be root to run system-config-kickstart (patch from
    Panu Matilainen <Panu.Matilainen@nokia.com>, #211998).


author: Chris Lumens <clumens@redhat.com> 2.6.14-1
changelog:
  - Use updated translations (#210728).
  - Update documentation (#210863).
  - Don't enable yum plugins.
  - Disable popup menu on the package selection screen.


author: Chris Lumens <clumens@redhat.com> 2.6.10-1
changelog:
  - Fix unencrypted root password traceback (#190487).
  - Try harder to get a base repo enabled (#190508).


author: Chris Lumens <clumens@redhat.com> 2.6.4-1
changelog:
  - Convert package selection to using pirut (#178759).
  - Partitioning screen fixes for cciss.
  - Use consolehelper.


author: Chris Lumens <clumens@redhat.com> 2.5.24-1
changelog:
  - Remove mouse and langsupport.  These two options have been removed from
    kickstart so we shouldn't be generating invalid files.
  - Fail if we read a line we don't understand instead of being silent.
  - Deal with drivers instead of cards due to kudzu changes.


author: Chris Lumens <clumens@redhat.com> - 2.5.19-1
changelog:
  - Fixed a segfault in pygtk on the partitioning screen.
  - Fixed RAID editing screen so the config values don't change if you
    repeatedly edit a RAID volume.


author: Chris Lumens <clumens@redhat.com> - 2.5.18-1
changelog:
  - Get package group lists and their translations out of the comps.xml file
    instead of reying on a built-in (and out of date) list.
  - Added an "Install Everything" button (#134679).


author: Chris Lumens <clumens@redhat.com> - 2.5.16-1
changelog:
  - Fix display in indic locale (#138310) and (#138601)
  - Monitor order (#127477)
  - Translation of RAID message (#127687)
  - Unencrypted root passwords (#134678)
  - Broken nfs line parsing (#134681)


author: Brent Fox <bfox@redhat.com> 2.5.11-2
changelog:
  - handle missing mouse line (bug #124341)
  - use N_ instead of _ in packages.py (bug #124144)
  - remove code for dead firewall widgets (bug #124342)


author: Brent Fox <bfox@redhat.com> 2.3.4-2
changelog:
  - rebuild for completeness
  - added some new system profiling code, but it's not exposed in the UI yet


author: Brent Fox <bfox@redhat.com> 2.3.4-1
changelog:
  - Handle opening existing kickstart files
  - Handle multiple ethernet interfaces
  - Don't require rootpassword on upgrades


author: Brent Fox <bfox@redhat.com> 2.3.2-16
changelog:
  - Don't write out --emulthree if No Mouse is selected
  - Fix gtk.glade.bindtextdomain so that the glade screens pull in translations


author: Tammy Fox <tfox@redhat.com> 2.3.2-2
changelog:
  - Updated list of langs
  - Reimplemented keyboard list to use list from rhpl
  - Fix for iter_next change


author: Brent Fox <bfox@redhat.com>
changelog:
  - completed the port to gtk2
  - Fixed bug 65835
  - Fixed bug 66815
  - Fixed bug 64453 (with help from menthos@menthos.com)


author: Tammy Fox <tfox@redhat.com>
changelog:
  - Added optional ftp username and password
  - Added preview menu item
  - Added bootloader --upgrade
  - Added swap --recommended
  - Added %packages -- resolvedeps and %packages --ignoredeps


author: Tammy Fox <tfox@redhat.com>
changelog:
  - added po directory
  - added grub password and initialize the disk label
  - added help manual and function to display it


author: Tammy Fox <tfox@redhat.com>
changelog:
  - added emulate three buttons and probe for mouse options
  - added preview configuration window
  - modified basic.py to use dictionaries to store combo box selections


author: Tammy Fox <tfox@redhat.com>
changelog:
  - added scrollwindow around partition information
  - made all widgets except partition scrollwindow unexpandable so that when the main window is resized only the partition list gets bigger
  - increased release number


author: Tammy Fox <tfox@redhat.com>
changelog:
  - added file dialog box
  - cleaned up code
  - renamed okButton to saveButton in ksconfig.py
  - renamed Cancel button to Exit in interface
  - added /boot to default partition list
  - added menu icon


author: Akira TAGOH <tagoh@redhat.com> - 0.20050222-8
changelog:
  - rely on PATH to find mkfontdir instead of /usr/X11R6/bin hardcoded.
  - replace Requires: mkfontdir instead of /usr/X11R6/bin/mkfontdir.


author: Akira TAGOH <tagoh@redhat.com> - 0.20050210-1
changelog:
  - Initial release.
  - integrated the below packages:
    - ttfonts-ja
    - jisksp14
    - jisksp16-1990
    - kappa20
    - knm_new
    - fonts-ja
  - Update shinonome font to 0.9.11.
  - Use Sazanami fonts instead of Kochi fonts.


author: Nalin Dahyabhai <nalin@redhat.com> - 1.4.5-14
changelog:
  - add patch from David Shaw to fix incorrectly detecting multiple plaintexts
    when processing multiple input files (#442815)


author: Nalin Dahyabhai <nalin@redhat.com> - 1.4.5-13
changelog:
  - incorporate patch from Werner to work around clients which
    can't tell that multiple plain messages have been processed (#230457)


author: Nalin Dahyabhai <nalin@redhat.com> - 1.4.5-10
changelog:
  - incorporate patch from Werner to fix use of stack variable after it goes
    out of scope (CVE-2006-6235, #218483)


author: Nalin Dahyabhai <nalin@redhat.com> - 1.4.5-9
changelog:
  - rebuild
  - give configure a --with-termlib option which can be used to force the
    selection of libtermcap or libncurses, but don't flip the switch yet


author: Nalin Dahyabhai <nalin@redhat.com> - 1.4.5-1
changelog:
  - update to 1.4.5, fixing additional size overflows in packet parsing (#200904,
    CVE-2006-3746)
  - temporarily disable curl support again


author: Nalin Dahyabhai <nalin@redhat.com> - 1.4.4.90-1
changelog:
  - update to 1.4.5rc1 to check for build problems, but mark it as 1.4.4.90
    to avoid looking "newer" than the eventual 1.4.5
  - because we call aclocal, buildrequire gettext-devel to get AM_GNU_GETTEXT


author: Nalin Dahyabhai <nalin@redhat.com> - 1.4.4-6
changelog:
  - fix a cast in gpgkeys_hkp to avoid tripping stack smashing or buffer overflow
    detection (#198612)


author: Nalin Dahyabhai <nalin@redhat.com> - 1.4.3-2
changelog:
  - apply patch from David Shaw to try multiple defaults if the the photo-viewer
    option isn't set (fixes #187880)


author: Nalin Dahyabhai <nalin@redhat.com> - 1.4.2.1-3
changelog:
  - add patch from David Shaw to fix error reading keyrings created with older
    versions of GnuPG (Enrico Scholz, #182163)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - change %post to check if the info files are there before attempting to
    add or remove them from the info index (#91641)


author: Nalin Dahyabhai <nalin@redhat.com> 1.4.1-2
changelog:
  - add -Wa,--noexecstack back to CFLAGS when invoking configure, the
    --enable-noexecstack flag only seems to affect asm modules


author: Nalin Dahyabhai <nalin@redhat.com> 1.4.0-1
changelog:
  - comment out libusb-devel req for now so that we can build
  - build the mpi asm modules with gcc, not a cpp/as setup so that we don't end
    up with text relocations in the resulting binaries (#145836)


author: Nalin Dahyabhai <nalin@redhat.com> 1.2.3-2
changelog:
  - incorporate patch from gnupg-announce which removes the ability to create
    ElGamal encrypt+sign keys or to sign messages with such keys


author: Nalin Dahyabhai <nalin@redhat.com> 1.2.1-3
changelog:
  - modify g10defs to look for helpers in libexecdir, because that's where they
    get installed, per gnupg-users
  - actually drop updates for 1.0.7 which are no longer needed for 1.2.1


author: Nalin Dahyabhai <nalin@redhat.com> 1.2.0-1
changelog:
  - update to 1.2.0
  - stop stripping files manually, let the buildroot policies handle it
  - add translations updates ca and fr


author: Nalin Dahyabhai <nalin@redhat.com> 1.0.7-4
changelog:
  - add and install info pages (#67931)
  - don't include two copies of the faq, add new doc files (#67931)


author: Nalin Dahyabhai <nalin@redhat.com> 1.0.6-3
changelog:
  - set message output encoding to match the message encoding, based on a
    patch by goeran@uddeborg.pp.se (#49182)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add a security patch for a problem with detached signature verification...
    might hold off for an impending 1.0.5, though


author: Neil Horman <nhorman@redhat.com> - 1.102pre-72
changelog:
  - Picked up some more fixes for HP systems (bz 277531)
  - Initialized machdep info for dump-dmesg (bz 475414)


author: Neil Horman <nhorman@redhat.com> -1.102pre-63
changelog:
  - Update kdump initscript to offer condrestart (bz 494483)
  - Update mkdumprd to use hostnames for ssh (bz 493690)


author: Neil Horman <nhorman@redhat.com> -1.102pre-59
changelog:
  - Fixed some bad status msgs on ssh target (bz 466450)
  - Fixed ability to detect md arrays (bz 479211)


author: Neil Horman <nhorman@redhat.com> -1.102pre-58
changelog:
  - Add --noio for HP rx series boxes in spec file (bz 277531)
  - Add fix for newer EFI firmware on ia64 (bz 473730)
  - Add fix to mkdumprd for newline in ifcfg files (bz 476063)


author: Jarod Wilson <jarod@redhat.com> -1.102pre-52
changelog:
  - Abort mkdumprd if devices in fstab can't be found (bz 472575)
  - Fix IDE CD-ROM hang fix further, add hdX=noprobe for the
    non-cdrom hdX's (bz 254163)


author: Neil Horman <nhorman@redhat.com> -1.102pre-45
changelog:
  - Fixed ability to drop to shell (bz 465453)
  - Fixed typo in changelog (bz 465445)
  - Fixed ability to handle raid5 partitions (bz 465361)


author: Neil Horman <nhorman@redhat.com> -1.102pre-41
changelog:
  - Fix kdump.conf man page to correct default directive (bz 463404)
  - Fix makedumpfile to not build wrong filter bitmap (bz 462864)


author: Jarod Wilson <jarod@redhat.com> -1.102pre-39
changelog:
  - Fix failure to capture vmcore when a panic triggers while
    an IDE CD-ROM drive is busy (bz254163)


author: Neil Horman <nhorman@redhat.com> -1.102pre-33
changelog:
  - Fix mkdumprd to support options directive (bz 459686)
  - Update kdump.conf man page to clarify msh use (bz 459622)


author: Neil Horman <nhorman@redhat.com> -1.102pre-23
changelog:
  - Fixed ppc64 kexec to make a page_size section for rtas (bz 438056)
  - Added udev rules to restart kdump on mem/cpu hotplug (bz 446423)


author: Neil Horman <nhorman@redhat.com> -1.102pre-22
changelog:
  - Start here for 5.3 errata
  - Fixed mkdumprd to wait for critical bdevs (bz 446279)
  - Fixed mkdumprd to not spew ld.conf warnings (bz 438459)
  - Fixed mkdumprd to not do extra efirtc create (bz 438755)
  - Enhanced mkdumprd to display progress (bz 223892)
  - Fixed mkdumprd to handle non-default lvm names (bz 360111)
  - Fixed howto to reflect correct scp use (bz 440983)
  - Fixed mkdumprd man page (bz 444824)


author: Neil Horman <nhorman@redhat.com> -1.102pre-1
changelog:
  - Update makedumpfile to use vmcoreinfo information (bz 253852)
  - Update kexec-tools to latest testing tree from horms (bz 253852)
  - Add vmcoreinfo retrieval patch (bz 253852)
  - Update makedumpfile to 1.2.0 to use vmcoreinfo (bz 253852)
  - modify mkdumprd to call makedumpfile properly w/ vmcoreinfo (bz 253852)


author: Jarod Wilson <jwilson@redhat.com> - 1.101-194.4
changelog:
  - Use PAE kernel for i686 xen kdump if mem > 4GB (bz 284821)
  - Warn users in firstboot if they need kernel-PAE (bz 284841)


author: Jarod Wilson <jwilson@redhat.com> - 1.101-194.1
changelog:
  - Add support for dumping to partitions on drives attached to cciss
    and cpqarray controllers (bz 228685)
  - Minor updates to kdump initscript for xen kdump support (bz 244301)


author: Jarod Wilson <jwilson@redhat.com> - 1.101-194
changelog:
  - Update kdump init script to look for crash kernel reservation in
    /proc/iomem so we can start up on xen kernels too (bz 250803)


author: Neil Horman <nhorman@redhat.com> - 1.101-192
changelog:
  - Update makedumpfile to version 1.1.1 (bz 248235)
  - reconcile mkdumprd options w/ man page (bz 247493)
  - Fix some doc formatting (bz 247552)


author: Jarod Wilson <jwilson@redhat.com> - 1.101-188
changelog:
  - Fix regression in network dump setup introduced by changes to
    support adding arbitrary kernel modules (bz 223929)


author: Jarod Wilson <jwilson@redhat.com> - 1.101-187
changelog:
  - Fix up firstboot memory reservation detection for ppc64 (bz 245980)
  - Minor formatting fix for post-script feature
  - Don't allow user to try to set up kdump on ia64 xen (not supported)
  - Nudge minimum allowed firstboot spinner values down a bit, but
    present same defaults as we always have


author: Jarod Wilson <jwilson@redhat.com> - 1.101-185
changelog:
  - Add translations for firstboot kdump module (bz 215318)
  - Update kexec-kdump-howto.txt with new options


author: Jarod Wilson <jwilson@redhat.com> - 1.101-184
changelog:
  - Add ability to specify arbitrary kernel modules that should be
    included in kdump initrd (bz 223929)
  - Add support for running a kdump post-capture script (bz 224101)
  - Fix regression with default/empty kdump.conf introduced by adding
    support for halt option


author: Jarod Wilson <jwilson@redhat.com> - 1.101-183
changelog:
  - Add halt option to default actions in kdump initrd (bz 224098)
  - Fix panic kernel load segfault regression on ppc64 (bz 245392)
  - A few minor spec consistency clean-ups


author: Neil Horman <nhorman@redhat.com> - 1.101-166
changelog:
  - Include mkdumprd man page (bz 223729)
  - Fix kdump.conf perms 
  - Fix documentation to reference other sources (bz 228861)
  - Fix mkdumprd typo (bz 224623)
  - Fix mkdumprd to use getent (bz 223247)


author: Jarod Wilson <jwilson@redhat.com> - 1.101-164
changelog:
  - Touch kdump.conf when kernel-kdump is installed to trigger
    proper kdump initrd creation on ppc64 (bz 217908)


author: Neil Horman <nhorman@redhat.com> - 1.101-156
changelog:
  - Fixing ppc64 memory range sizing (bz 220626)
  - Adding doc content to prevent use of vfat/msdos fs as dump targets


author: Jarod Wilson <jwilson@redhat.com> - 1.101-155
changelog:
  - Fix ia64/elilo boot param updating in firstboot module (bz 220351)
  - Set min/max mem in firstboot module to zero if running on xen kernel


author: Neil Horman <nhorman@redhat.com> - 1.101-151
changelog:
  - Removing kcp directory creation from build
  - Updating ia64 phdr patch to upstream version (bz 218503)


author: Neil Horman <nhorman@redhat.com> - 1.101-147
changelog:
  - Fixed some typos in kdump.conf
  - Fixed propogate command when target .ssh dir doesn't exist (bz 219526)


author: Neil Horman <nhorman@redhat.com> - 1.101-144
changelog:
  - Update to makedumpfile-1.0.7 to fix ELF32/64 issue (bz 218325)
  - Update spec file to build makedumpfile for ppc64
  - remove strip command from specfile to get debuginfo for makedumpfile


author: Neil Horman <nhorman@redhat.com> - 1.101-141
changelog:
  - Fixed firstboot to properly disable service (bz 216430)
  - Fixed initscript to properly set elf header size (bz 217780)


author: Jarod Wilson <jwilson@redhat.com> - 1.101-137
changelog:
  - Fix up firstboot module spinner limits (bz 217744)
  - Added check to make sure net interfaces are up
  - Added feature to allow for post link up sleep (bz 216736)


author: Neil Horman <nhorman@redhat.com> - 1.101-127
changelog:
  - Fix mkdumprd to determine net driver name in absence of modalias (bz 215060)
  - Fix mkdumprd to check exit code of dd on raw target (bz 215061)


author: Jarod Wilson <jwilson@redhat.com> - 1.101-123
changelog:
  - Update documentation to detail setting up raw partition, dedicated
    file system, nfs and ssh dumps (bz 198841)
  - Use dedicated key for ssh dumps
  - Enable ssh dumps using non-root user on destination system
  - Rewrap kdump.conf to under 80 chars per line


author: Neil Horman <nhorman@redhat.com> - 1.101-120
changelog:
  - supress kexec messages from stderr (bz 212410)
  - fix mkdumprd to present proper name when run with --version (bz 213695)


author: Neil Horman <nhorman@redhat.com> - 1.101-116
changelog:
  - further cleanups on firstboot_kdump.py (bz 213494)
  - modify status function in kdump.init to report no support (bz 212744)


author: Neil Horman <nhorman@redhat.com> - 1.101-113
changelog:
  - Fixing failed execs to grubby + chkconfig in firstboot (bz 212734)
  - Fix startup on xen kernel to properly indicate lack of support (bz 212744)


author: Neil Horman <nhorman@redhat.com> - 1.101-107
changelog:
  - Removing old hack patch for relocatable kernels
  - Rediffing other patches to work with previous patch removed


author: Neil Horman <nhorman@redhat.com> - 1.101-100
changelog:
  - Update kdump initscript to do FAILED/OK printing to console (bz 211303)
  - remove initial rpm install initramfs build clause in initscript (bz 211350)


author: Neil Horman <nhorman@redhat.com> - 1.101-97
changelog:
  - Fix up initscript to add ability to propagate ssh keys
  - Fix up mkdumprd to indicate need to run service kdump propagate on err
  - Add proper OK/FAIL output to start/stop routines


author: Neil Horman <nhorman@redhat.com> - 1.101-94
changelog:
  - Fixing EFI bug on ia64 (bz 210472)
  - Fixed minor bug in rename_interface script to reset MASTER
  - Fixed vlan device renaming in map_interface
  - Adjusted interfaces file for ifup sensitivity to static spec


author: Neil Horman <nhorman@redhat.com> - 1.101-81
changelog:
  - update mkdumprd to detect missing debuginfo pkg (bz 209342)
  - update mkdumprd to use new mkdumpfile systam (bz 209342)
  - strip makedumpfile to make smaller initramfs
  - fix check with makedumpfile to use supported dump targets
  - write to vmcore-incomplete and move to vmcore (bz 209465)
  - remove ifc cruft from mkdumprd


author: Neil Horman <nhorman@redhat.com> - 1.101-80
changelog:
  - Update makedumpfile to version 1.0.1 with several fixes/updates
  - remove now obsolete kcp utilty from build


author: Neil Horman <nhorman@redhat.com> - 1.101-78
changelog:
  - Removed setquiet from init script (bz 209198)
  - Fixed up docs in kdump.conf (bz 209190)
  - Corrected block device creation logic (bz 209162)
  - Fixed date format (bz 209189)


author: Neil Horman <nhorman@redhat.com> - 1.101-75
changelog:
  - Update mkdumprd to support bonding from initramfs
  - Update mkdumprd to support finding root filesystems by uuid/label


author: Neil Horman <nhorman@redhat.com> - 1.101-66
changelog:
  - remove args-linux from kdump.init standard args (bz 206355)
  - fixup some kdump initscript exit codes (bz 206342)


author: Neil Horman <nhorman@redhat.com> - 1.101-63
changelog:
  - Update mkdumprd to include an /etc/passwd file
  - Update mkdumprd to unmount /mnt before trying to do rootfs mount


author: Neil Horman <nhorman@redhat.com> - 1.101-62
changelog:
  - Update kdump.init to check kdump.status on startup op
  - Update kdump.init to include maxcpus=1 on KDUMP_COMMANDLINE
  - Update kdump.init to rebuild initrd if none found 
  - Update mkdumprd to universally include /bin/cp


author: Neil Horman <nhorman@redhat.com> - 1.101-55
changelog:
  - update mkdumprd to properly handle scp and nfs dumping
  - fix typo in kcp.c
  - update docs in kdump.conf to reflect new ifc parameter


author: Jarod Wilson <jwilson@redhat.com> - 1.101-46
changelog:
  - ppc64 fixups:
    - actually build ppc64 binaries (bug 203407)
    - correct usage output
    - avoid segfault in command-line parsing
  - install kexec man page
  - use regulation Fedora BuildRoot


author: Neil Horman <nhorman@redhat.com> - 1.101-45
changelog:
  - fixed typo in mkdumprd for bz 202983
  - fixed typo in mkdumprd for bz 203053
  - clarified docs in kdump.conf with examples per bz 203015


author: Thomas Graf <tgraf@redhat.com> - 1.101-15
changelog:
  - Don't add kdump service by default, let the user manually add it to
    avoid everyone seeing a warning.


author: Thomas Graf <tgraf@redhat.com> - 1.101-10
changelog:
  - kdump7.patch
     o Remove elf32 core headers support for x86_64
     o Fix x86 prepare elf core header routine
     o Fix ppc64 kexec -p failure for gcc 4.10
     o Fix few warnings for gcc 4.10
     o Add the missing --initrd option for ppc64
     o Fix ppc64 persistent root device bug
  - Remove --elf32-core-headers from default configuration, users
    may re-add it via KEXEC_ARGS.
  - Remove obsolete KEXEC_HEADERS


author: Jeff Moyer <jmoyer@redhat.com> - 1.101-8
changelog:
  - Fix the service stop case.  It was previously unloading the wrong kernel.
  - Implement the "restart" function.
  - Add the "irqpoll" option as a default kdump kernel commandline parameter.
  - Create a default kernel command line in the sysconfig file upon rpm install.


author: Jeff Moyer <jmoyer@redhat.com> - 1.101-4
changelog:
  - Build for x86_64 as well.  Kdump support doesn't work there, but users
    should be able to use kexec.


author: Adam Jackson <ajax@redhat.com> 0.41.1-3
changelog:
  - rhpxl-0.41.1-dont-filter-by-randr.patch: Don't filter the mode list by
    the current set of RANDR modes; if you do, you can't use s-c-d to
    resize larger than the current resolution. (#219255 and others)


author: Chris Lumens <clumens@redhat.com> 0.41.1-1
changelog:
  - Add support for writing out a config file section for the IBM Advanced
    System Management PCI adapter card (#227407).


author: Chris Lumens <clumens@redhat.com> 0.41-1
changelog:
  - Trust kudzu to give us the right video driver instead of using
    readDrivers to trim the list of what's available (#211977).


author: Adam Jackson <ajackson@redhat.com> 0.35-1
changelog:
  - Fix resolution comparison to, uh, work.
  - Properly write out Display subsections so the resolution selector works again
  - Require newer pyxf86config


author: Adam Jackson <ajackson@redhat.com> 0.34-1
changelog:
  - Add general RANDR awareness to mode list construction and validation.
  - Generalize forceVesa to forceDriver.


author: Jeremy Katz <katzj@redhat.com> - 0.32-1
changelog:
  - Probe all buses for video cards
  - Only do PCI bits for PCI video cards
  - Another place to fix the default depth


author: Chris Lumens <clumens@redhat.com> 0.28-1
changelog:
  - Fixes to init_from_xconfig for system-config-display.
  - Close X server stdout and stderr as having two log files is confusing.


author: Chris Lumens <clumens@redhat.com> 0.27-1
changelog:
  - Don't traceback if there's no module list.
  - Return default strings if monitor or video card names are None.
  - Handle starting up an XServer object with an existing conf file.


author: Chris Lumens <clumens@redhat.com> 0.25-1
changelog:
  - Convert x startup code into a class, simplifying startup API.
  - Restore call to xStartedCB so mini-wm gets run under anaconda.
  - Simplify looping and waiting in startup code.


author: Chris Lumens <clumens@redhat.com> 0.23-1
changelog:
  - Remove -terminate flag to fix X startup race condition
    (Charlotte Richardson).
  - Fix synaptics detection and config file write out.


author: Chris Lumens <clumens@redhat.com> 0.22-1
changelog:
  - Fix traceback on default log file location.
  - Restore driver options to config file to fix ppc installs.


author: Chris Lumens <clumens@redhat.com> 0.20-1
changelog:
  - Remove code for config sections that X can figure out for itself.
  - Use python randr bindings to change resolution (bindings based on code
    from Michael Sheldon <webmaster at mikeasoft dot com>).
  - rhpxl is now native


author: Chris Lumens <clumens@redhat.com> 0.16-1
changelog:
  - Only put one non-vesa card in front of the list (#182016).
  - Provide a fixed list of supported resolutions for the SGI 1600SW (#115679).


author: Chris Lumens <clumens@redhat.com> 0.8-1
changelog:
  - Attempt to set hsync and vsync from the config file if probing fails
    (Maxim Dzumanenko - #154172).


author: Chris Lumens <clumens@redhat.com> 0.4-1
changelog:
  - Correct where we look for data files (#170505).
  - Translate in rhpxl domain instead of rhpl domain.
  - Correct __init__ to import everything.


author: Jakub Jelinek <jakub@redhat.com> 0.4.0-2.el5
changelog:
  - add support for -c /etc/prelink.conf.d/*.conf in prelink.conf (#249889)
  - remove no longer existent directories from default prelink.conf (#248694)
  - reenabled prelink C++ optimizations which have not triggered any longer
    since _ZT[IV]* moved into .data.rel.ro section from .data
  - fixed performance issues in C++ optimizations, especially on GCJ
    CNI programs (#314051)
  - other performance improvements, prelink -avmR after prelink -ua now
    takes roughly 3m4s real time instead of 20m27s before
  - don't run TEXTREL tests if SELinux is enforcing (#245928)
  - don't leave temporary files behind on prelink --verify failures (#199251)
  - fix adjusting of .debug_ranges if end of range is at the end of some
    section and there is padding before the following one


author: Jakub Jelinek <jakub@redhat.com> 0.3.9-2.1
changelog:
  - blacklist libfreebl3.so and libsoftokn3.so, as nss does some
    FIPS mandated braindamaged integrity checking of these two libraries
    (#245775)


author: Jakub Jelinek <jakub@redhat.com> 0.3.9-1
changelog:
  - DT_GNU_HASH support
  - handle N_BNSYM and N_ENSYM stabs (#198203)
  - handle upgrades from prelink with smaller maxpagesize to prelink
    with larger maxpagesize (#196941)


author: Jakub Jelinek <jakub@redhat.com> 0.3.8-1
changelog:
  - fix -q mode canonicalization fix, speed up filename canonicalization
    by caching canonicalization for directories (#145983, #188062)
  - remove bogus e_shoff assertion check (#194016)
  - move prelink log file to /var/log/prelink/prelink.log (#194473)
  - increase x86-64 maxpagesize to 2MB


author: Jakub Jelinek <jakub@redhat.com> 0.3.7-1
changelog:
  - in -q mode, recheck the canonicalized filename to avoid
    overwriting symlinks with regular files (#145983, #188062)
  - allow prelinking of binaries with .tbss section


author: Jakub Jelinek <jakub@redhat.com> 0.3.6-3
changelog:
  - rebuilt again, disable -Wl,-z,nocopyreloc tests on x86_64,
    nocopyreloc really doesn't work on this platform (#180552)


author: Jakub Jelinek <jakub@redhat.com> 0.3.6-1
changelog:
  - remove kernel requires - installed kernel doesn't imply running
    kernel anyway and in FC5 kernels older than 2.4.20 can't be used
    anyway, as LinuxThreads are no longer included
  - don't relocate stabs N_{B,D,}SLINE (reported by Ashley Pittman)


author: Jakub Jelinek <jakub@redhat.com> 0.3.5-1
changelog:
  - support for ppc32 -msecure-plt libraries and binaries
  - don't crash if d_tag is invalid (#155605)
  - rebuilt against robustified libelf (CAN-2005-1704)
  - fix handling of libraries and binaries given on command
    line without any / characters in the filename


author: Jakub Jelinek <jakub@redhat.com> 0.3.4-1
changelog:
  - fix prelink -uo when linked against libselinux (#146637)
    and when the -o argument filename is on a different filesystem
    than the object that needs undoing


author: Jakub Jelinek <jakub@redhat.com> 0.3.3-1
changelog:
  - if layout code needs to re-prelink some library, make sure
    all libraries that depend on it are re-prelinked too (#140081)
  - add several more checks before deciding it is ok to prelink a binary
    (even if another bug like #140081 was in, these checks should hopefully
    catch it and refuse to (re-)prelink the binary)
  - added new PRELINK_NONRPM_CHECK_INTERVAL variable to /etc/prelink,
    defaulting to 7 days.  Prelink nightly job will not do anything
    if that interval has not elapsed since last prelinking and
    and the rpm database has not been modified since that prelinking.
    This is useful if you rely on rpm/up2date/yum/apt-rpm for library
    and binary updates.  If you combine it with other means (installs
    from source, tarballs etc.), you probably want to
    set PRELINK_NONRPM_CHECK_INTERVAL=0.
  - update prelink man page (#126468)


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-10
changelog:
  - support for non-absolute blacklist glob patterns (e.g. -b *.la)
  - cache information about non-prelinkable files (non-ELF, statically linked,
    too small .dynamic, DT_TEXTREL with conflicts against it; #132056)
  - other speedups for prelink -aq
  - for --verify, make sure only read-only fd's are opened for the
    unprelinked temporary file, otherwise a kernel might ETXTBUSY on it
    (#133317)
  - change warning message if some object's dependencies can't be found
  - add buildrequires libselinux-devel and use %{_tmppath} instead
    of /var/tmp in Buildroot (#132879)


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-6
changelog:
  - change sed separator in testsuite scripts from | to , if \|
    is present in regexps, as that invokes undefined behaviour
    which changed between GNU sed 4.0.9 and 4.1


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-2
changelog:
  - add 2 new TLS testcases (one that fails e.g. with glibc < 2.3.3-28
    on IA-32)
  - SPARC TLS support


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-1
changelog:
  - fix cxx.c:68: find_cxx_sym: Assertive `n < ndeps' failed problem
    on 32-bit architectures (#118522)
  - build prelink.cache into temporary file and atomically rename over
    (#121109)


author: Jakub Jelinek <jakub@redhat.com> 0.3.1-2
changelog:
  - unlink temporary files if renaming to the destination or setting of
    security context failed (#118251)
  - fix bi-architecture prelinking (#118226)
  - if prelink called from the cron script fails, note the exit status
    into /var/log/prelink.log


author: Jakub Jelinek <jakub@redhat.com> 0.3.1-1
changelog:
  - add prelink documentation (PDF format)
  - fix assertion failures on PPC (.sdynbss related, #115925)
  - fix prelink --help (#115202)
  - avoid free on uninitialized variable in one error path (#117332)
  - s/i386/%{ix86}/ to make mharris happy


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-21
changelog:
  - fix prelink abort in certain cases where a new PT_LOAD segment
    needs to be added (seen on AMD64)


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-20
changelog:
  - clearify message about unlisted dependencies
  - don't do SELinux context copying if is_selinux_enabled () < 0


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-19
changelog:
  - refuse to prelink objects whose dependencies as reported by
    ldd don't include all dependencies transitively (this can
    happen when using RPATH and a shared library with the same
    SONAME exists both in that RPATH and either another RPATH
    or standard library directories)
  - add testcase for this
  - rework .dynsym/.symtab STT_SECTION translation, so that it works
    with binutils which put only sections not generated by the linker
    into .dynsym for shared libraries
  - fix make check, so that it is not confused by 2.6.x kernel
    VDSOs


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-18
changelog:
  - allow R_*_JU?MP_SLOT relocs to point also into .got.plt
    sections on IA32/AMD64/ARM/s390/s390x/SH


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-15
changelog:
  - blacklist support
  - use FTW_ACTIONRETVAL if available to avoid even stating of
    files in blacklisted directory trees
  - SELinux support


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-12
changelog:
  - added execstack tool
  - added -o option, to be used together with -u
  - free temp_filename in close_dso


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-11
changelog:
  - fix adjustement of DT_VALRNGLO .. DT_VALRNGHI and
    DT_ADDRRNGLO .. DT_ADDRRNGHI dynamic tags when relocating shared
    libraries
  - never adjust p_vaddr/p_paddr/p_offset of PT_GNU_STACK segment
  - allow shell wildcards in /etc/prelink.conf
  - fix REL->RELA conversion of shared libraries if .rel.dyn
    or .rel.plt are last sections in readonly PT_LOAD segment
  - force full reprelinking on prelink upgrades (well, first time
    the cron job is run after the upgrade)
  - require coreutils, findutils, util-linux, gawk and grep


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-8
changelog:
  - use /var/lib/misc/prelink.full instead of /var/run/prelink.full for last
    full prelink timestamp (#106721)
  - warn about UPX compressed binaries or libraries/binaries without section
    headers (neither can be prelinked obviously)


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-7
changelog:
  - don't rely on malloc/calloc/realloc with size 0 returning a unique pointer
  - fix testsuite, so that it works even if installed glibc/libstdc++
    is already prelinked


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-5
changelog:
  - fix prelink segfault on -z nocombreloc libraries (#103404)
  - run one make check round with -Wl,-z,nocombreloc to test handling
    of nocombreloc binaries and libraries


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-3
changelog:
  - fix DT_CHECKSUM computation - do STT_LOCAL symbol frobbing and .mdebug
    updates write_dso would do also before checksum computation (#89953)


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-2
changelog:
  - avoid assertion failures when changing PROGBITS .bss back into
    NOBITS .bss (#101813)
  - add 2 new tests for it


author: Jakub Jelinek <jakub@redhat.com> 0.3.0-1
changelog:
  - run prelink from cron automatically, add /etc/sysconfig/prelink
    to configure it
  - update manual page


author: Jakub Jelinek <jakub@redhat.com> 0.2.1-2
changelog:
  - fix a thinko in the library path checking code
  - change R_386_GLOB_DAT into R_386_32 in .gnu.conflict, similarly
    R_X86_64_GLOB_DAT and R_X86_64_64
  - fix a bug in find_free_space which caused
    "section file offsets not monotonically increasing" errors on some
    IA-32 binaries
  - add --md5 and --sha options
  - use mmap during --verify if possible
  - add */lib64 directories to prelink.conf


author: Jakub Jelinek <jakub@redhat.com> 0.2.1-1
changelog:
  - make sure binaries prelinked for the second and later time without
    unprelinking in between verify correctly
  - make sure DT_CHECKSUM computation is the same for newly prelinked
    and second or later time prelinked libraries
  - dwarf2 abbrev hash bugfix
  - don't allow prelinking libraries outside directories specified
    in config file or on the command line
  - several new tests for reprelinking
  - pack non-alloced sections and section header table tightly after the
    last alloced section


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-28
changelog:
  - finish and enable ppc64
  - fix ppc BR{,N}TAKEN reloc handling
  - fix up sh_offset values of zero-sized or SHT_NOBITS section
    if ld messed them up
  - issue error about bogus library dependency chains instead of
    segfaulting (plus testcases for it)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-27
changelog:
  - add --quick mode
  - new test for --quick mode and also reprelinking of binary against
    upgraded shared library which needs more conflicts


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-26
changelog:
  - don't segfault in C++ optimizations if a conflict from undefined
    to defined value is seen
  - some more ppc64 work


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-25
changelog:
  - exec-shield support
  - with -R, don't randomize just base address from which all libs
    are layed out, but also slightly randomize order of libraries
    in the layout queue
  - add check-harder and check-cycle makefile goals in testsuite/,
    use it during rpm building


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-24
changelog:
  - optimize out conflicts in G++ 3+ virtual tables if they are just
    because some method has been called from a binary and thus there
    is a .plt slot in the binary. This change not only kills lots of conflicts
    on some KDE programs, but also should speed up runtime (not just startup
    time), since the hop through .plt is bypassed
  - added new C++ test
  - fix a bug in ppc64 fixup .plt code


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-23
changelog:
  - when updating dynamic tags for executable after section reshuffling,
    check section type as well, so that 0 sized sections don't get the
    tags attached instead of the proper ones
  - when an address space conflict is found between libraries for the same
    executable during layouting, check properly for all remaining conflicts
    as well


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-22
changelog:
  - don't adjust DT_REL{,A} if it is 0
  - allow prelinking of libraries with no dependencies
  - fix handling of libraries with no lazy relocs, no normal relocs or no
    relocs at all
  - some new tests
  - fix SH (Daniel Jacobowitz)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-20
changelog:
  - ppc TLS
  - some ppc64 work
  - avoid using trampolines for nested functions
  - fix typo in prelink man page (#89247)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-18
changelog:
  - fix section indices in .symtab if non-alloced sections weren't
    originally monotonically increasing
  - s390, s390x and Alpha TLS support


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-13
changelog:
  - use ELF_F_PERMISSIVE if defined
  - be permissive even when doing --reloc-only
  - fix up .plt section sh_entsize on Alpha


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-11
changelog:
  - make it work with elfutils instead of libelf 0.[78]
  - update to newer auto*/libtool
  - some more steps towards TLS support, at least --reloc-only should work


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-9
changelog:
  - enable on ppc and x86_64
  - fix ppc far PLT slot prelink
  - support --undo on ppc
  - for bug-compatibility with some unnamed OS changed R_SPARC_RELATIVE
    --undo
  - tiny steps towards TLS support on IA-32, more will come


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-8
changelog:
  - avoid putting garbage into executable's .gnu.liblist sh_link
    if we did not have to grow .dynstr
  - don't segfault on bogus sh_link and sh_info values (#72705)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-7
changelog:
  - when growing allocated shared lib sections (for REL->RELA
    conversion), make sure !PF_W and PF_W segments don't end up
    on the same page
  - when finding space for sections in an executable, make sure
    it is not included in between two reloc sections
  - for non-zero SHN_ABS symbols on 32-bit arches mask high
    32-bits of st_value (libelf 0.8.x is strict here)


author: Jakub Jelinek <jakub@redhat.com> 0.2.0-1
changelog:
  - added --undo and --verify mode
  - new architectures s390, s390x, arm, sh
  - handle binaries/shared libraries with non-allocated sections
    without monotonically increasing sh_offsets
  - handle .sbss and .sdynbss
  - fixed a bug in 64-bit LE/BE read routines
  - removed .rel{,a}.dyn reloc conversion/sorting, it was duplicating
    ld's -z combreloc and complicated lots of things
  - fixed STB_LOCAL/STT_SECTION symbol adjusting
  - use mkstemp for temporary files, allow --verify for binaries/libs
    on read-only filesystems
  - added DWARF-2 .debug_ranges adjustement, special case GCC's
    "set base to 0 and make things absolute instead of relative" trick
  - allow arches to override default layout mechanism (for ppc)
  - added some new tests, test --undo and --verify modes in the testsuite
  - alpha: adjust what R_ALPHA_GLOB_DAT points to too
  - i386: apply _32 and _PC32 REL relocs, as apply_rel can be called
    for C++ optimizations before REL->RELA conversion
  - ppc: layout strategy to satisfy ppc lib location preferences
  - sparc64: handle R_SPARC_DISP64
  - x86-64: adjust what R_X86_64_RELATIVE points to too
  - link prelink statically, esp. because of --verify mode
  - run make check during build process


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-7
changelog:
  - fix layout code so that -R works
  - on IA-32, when there are no R_386_PC32 relocs and no R_386_32 relocs
    with non-zero addend (= memory content), don't convert REL->RELA,
    only switch R_386_32 relocs to R_386_GLOB_DAT
  - support creating a new PT_LOAD segment if necessary, if SHT_NOBITS
    sections are small, instead of adding new PT_LOAD segment just add file
    backing to those NOBITS sections
  - added testsuite
  - new supported architectures (Alpha including .mdebug section support,
    Sparc, Sparc 64-bit, X86_64 (the last one untested)), beginning of PPC
    support


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-5
changelog:
  - fix sorting of .rel*.dyn sections, so that all RELATIVE relocs really
    come first
  - when DT_RELCOUNT already exists and conversion REL->RELA is done,
    convert it into DT_RELACOUNT
  - set conflict lookupent and conflictent to 0 for undefineds
  - don't bother with DT_REL*COUNT for apps, they cannot have any RELATIVE
    relocs


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-4
changelog:
  - brown paper bag time: when determining if conversion from REL to RELA
    is needed, check all non-PLT rel sections, including last.
    This caused prelinking to fail with -z combreloc compiled libraries.


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-3
changelog:
  - don't use .gnu.reloc section, use .rel.dyn or .rela.dyn instead
  - put RELATIVE relocs first, not last, so that DT_REL{,A}COUNT
    works
  - put in updated glibc patch
  - no need for special binutils patch - all is done in the -z combreloc
    patchset


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-2
changelog:
  - use the new DT_GNU_CONFLICT/DT_GNU_LIBLIST/SHT_GNU_LIBLIST constants
  - unlink *.#prelink# files if necessary


author: Jakub Jelinek <jakub@redhat.com> 0.1.3-1
changelog:
  - fix layout.c
  - create .gnu.prelink_undo section, --undo and --verify modes will use that
  - some more C++ specific optimizations


author: Jakub Jelinek <jakub@redhat.com> 0.1.2-1
changelog:
  - bail out early if ELF object does not have sh_offsets
    monotonically increasing
  - disallow prelinking if there are conflicts against read-only
    segments in shared libraries (ie. non-pic shared libraries
    - this is better than bailing out for all non-pic shared libraries)
  - add some C++ specific optimizations to reduce number of conflicts,
    more to come


author: Jakub Jelinek <jakub@redhat.com> 0.1.1-1
changelog:
  - relocate stabs and dwarf-2 debugging formats
  - support both --all and incremental prelinking
  - handle hardlinks
  - limit to libraries in /etc/prelink.conf directories or
    directories from command line


author: Ville Skyttä <ville.skytta at iki.fi> 1.2.5-5jpp
changelog:
  - Use the Xalan/XSLTC version (backwards-compatible with the official one).
  - Renamed jar to jlex.jar (was JLex.jar).
  - Some spec cleanup.


author: John (J5) Palmieri <johnp@redhat.com> - 0.3.1-9
changelog:
  - Add patch to fix struct handling in the dbus glib binding for dbus 0.61
    so image data works again


author: Christopher Aillon <caillon@redhat.com> - 0.3.1-6
changelog:
  - Add patch to determine whether a compositing manager is running
    when drawing a new notification bubble, as long as the CM grabs
    the appropriate XSelection.


author: Christopher Aillon <caillon@redhat.com> - 0.3.1-4
changelog:
  - Provide desktop-notification-daemon, since libnotify requires a
    notification deamon, but not this specific one.  Other notification
    daemons can exist on the system so long as they meet the provides
    (and the API of course).


author: Karel Zak <kzak@redhat.com> 22.1.03072006cvs-1
changelog:
  - update to new upstream CVS version 
  - enable new fuser version
  - fix fuser return code 
  - fix #183897 - "pstree -a" call results in segmentation fault


author: Karel Zak <kzak@redhat.com> 21.6-1
changelog:
  - sync with upstream release 21.6
  - cleanup selinux patch
  - fix #165167 - buffer overflow detected in fuser


author: Karel Zak <kzak@redhat.com> 21.5-1
changelog:
  - Updated to new upstream version 21.5
  - Ported SELinux patch forward as psmisc-21.5-selinux.patch
  - Added psmisc-21.5-term.patch that fix termcap.h and term.h conflicts


author: Mike A. Harris <mharris@redhat.com> 21.4-1
changelog:
  - Updated to new upstream version 21.4
  - Ported SELinux patch forward as psmisc-21.4-redhat-selinux-psmisc.patch,
    but disabled SELINUX support temporarily until other build problems are
    resolved
  - Remove MKINSTALLDIRS-./mkinstalldirs from "make install" as that causes the
    build to fail when "./" changes.  If this option is ever added back, make
    it relative to $RPM_BUILD_DIR instead of ./ so that things do not break
  - Added pstree.x11 to file list after rpm reported it present in buildroot but
    not packaged


author: Mike A. Harris <mharris@redhat.com> 21.3-1
changelog:
  - Updated to new upstream version 21.3
  - Removed dead script gensig.sh
  - Disabled psmisc-21.2-gcc33.patch as it is included in 21.3


author: Mike A. Harris <mharris@redhat.com> 21.2-2
changelog:
  - Updated to new upstream version 21.2
  - Updated Source: URL to sourceforge's current ftp area
  - Fixes fuser largefile bug (#66340)
  - Disable prep time sh %{SOURCE1} >src/signames.h as the 21.2 release
    fixes this already now.


author: Bernhard Rosenkraenzer <bero@redhat.com> 20.2-4
changelog:
  - Autogenerate the signal list from /usr/include/bits/signum.h
    to make sure it works on all arches and doesn't break again.


author: Bernhard Rosenkraenzer <bero@redhat.com> 20.2-1
changelog:
  - 20.2
  - Add patch from bug report #56186; the problem is not reproducable,
    but the patch can't hurt.


author: Bernhard Rosenkraenzer <bero@redhat.com> 20.1-2
changelog:
  - Add BuildRequires (#49562)
  - s/Copyright/License/
  - Fix license (it's actually dual-licensed BSD/GPL, not just "distributable")


author: Ray Strode <rstrode@redhat.com> 2.4.2-2
changelog:
  - Move gthumb.desktop to redhat-menus (#131726)
  - Require recent desktop-file-utils
  - Call update-desktop-database from %postun


author: Christopher Aillon <caillon@redhat.com> 2.4.2-1
changelog:
  - gthumb.desktop: Add supported mime types (#131740)
    - gthumb.spec: Run update-desktop-database (#131740)
    - Update to 2.4.2


author: Warren Togami <wtogami@redhat.com> 2.3.2-2
changelog:
  - #111001 BR: libgnomeui-devel gettext libpng-devel
    BR or missing features: gphoto2-devel libjpeg-devel libtiff-devel


author: Jason Vas Dias <jvdias@redhat.com> 1.0-0.9.pre5
changelog:
  - Allow build to succeed with new gcc / glibc-kernheaders
    (compile failed on __u64 redefinition on x86_64).
  - Add a static /usr/lib/libnl.a library to libnl-devel for
    programs that might need to do a static link to libnl.
    Added after consultation with Christopher Aillon.


author: Tim Powers <timp@redhat.com> 1:1.4.2-7
changelog:
  - include dejagnu.h
  - move %{_libexecdir}/config.guess into %{_datadir}/dejagnu 
  - include overview docs (bug #59095)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - add alpha expect patch (#989)
  - use 
    CFLAGS="${CFLAGS:--O2}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2}" ; export FFLAGS ; 
    for i in $(find . -name config.guess -o -name config.sub) ; do 
             [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /bin/rm -f $i && /bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; 
    done ; 
    ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu \
  	--target=noarch-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib64 \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/usr/com \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info


author: Nils Philippsen <nphilipp@redhat.com> - 1.2-4
changelog:
  - add "Provides/Requires: libhugetlbfs-%{arch} ..." to base and -devel
    packages to avoid upgrade problems on multilib systems (#432799)
  - change license tag to LGPLv2+


author: Nils Philippsen <nphilipp@redhat.com> - 1.2-1
changelog:
  - version 1.2 (#253115)
  - move libraries back to main package as hugetlbd was removed, obsolete and
    conflict libhugetlb-lib


author: Johnny Hughes <johnny@centos.org> - 2.0-37.el5.centos
changelog:
  - brought in CentOS Backgrounds (Source100)
  - patched to 5:4 aspect for desktop.xml file. (patch100)
  - did not remove default.jpg files.


author: Matthias Clasen <mclasen@@redhat.com> 2.0.24
changelog:
  - Prepopulate the list of backgrounds in the background
    changes with a small set of good backgrounds (#133382)
  - redhat-backgrounds-7


author: Havoc Pennington <hp@redhat.com>
changelog:
  - redo it, now it includes the tile/image collection
    redhat-backgrounds from CVS, plus propaganda
  - move things to datadir/share/backgrounds/images 
    and datadir/share/backgrounds/wallpapers
  - split into a small basic package and an extra package, 
    so we can have packages require the basic package
    without sucking in huge images
  - move space images into devserv CVS
  - move nautilus and kdebase tiles into devserv CVS


author: Jonathan Blandford <jrb@redhat.com>
changelog:
  - added propaganda tiles.  Spruced it up a bit
  - moved README files out of tarball, and into docs dir.


author: Miloslav Trmac <mitr@redhat.com> - 0.8.4-0.cvs20041111.1
changelog:
  - Update to current CVS snapshot, Python 2.4b2 requires unreleased PyXML-0.8.4
  - Backport xml.sax.saxutils fix from Python 2.4b2


author: Trond Eivind Glomsrød <teg@redhat.com> 0.7.1-6
changelog:
  - Reenable expat. While most code works, some specify expat directly
    and fails. Fix #72698, but there is still broken code there (it just 
    goes on to other errors)


author: Trond Eivind Glomsrød <teg@redhat.com> 0.7.1-5
changelog:
  - Disable expat support. Other parsers are included. Broken here, 
    broken in 0.8.0. This fixes #72698


author: Marek Grac <mgrac@redhat.com> 2.3-3
changelog:
  - Resolves: bz#521891 - Replace #!/usr/bin/env python 
  - Resolves: bz#481380 - Obsolete EPEL package


author: Toshio Kuratomi <toshio@tiki-lounge.com> - 2.1-3
changelog:
  - Bump and rebuild for python 2.5 on devel.
  - Add BR: python-devel as it provides a header necessary for python modules
    on python 2.5.


author: Toshio Kuratomi <toshio@tiki-lounge.com> - 2.1-2
changelog:
  - Remove pyver define as it's not needed with the automatic python(abi).
  - Stop ghosting .pyos.
  - Let automatic python compilation take care of creating pyos.
  - Rebuild for FC6.


author: Toshio Kuratomi <toshio@tiki-lounge.com> 0.99999b-2
changelog:
  - Add LICENSE File.
  - Make noarch.
  - Remove executable permissions from the modules copied to examples.


author: Toshio Kuratomi <toshio@tiki-lounge.com> 0.999-2
changelog:
  - Use python_sitelib macro to resolve build issues on x86_64.
  - %ghost *.pyo
  - Install ANSI.py, screen.py, and FSM.py into the examples.  These are intended
    to suplement pexpect eventually but they are currently much less robust and
    not installed to by default.  But they are needed by some examples.
  - Use __python macro in build/install for consistency.
  - Add --skip-build to the invocation of setup.py in install.


author: Panu Matilainen <pmatilai@welho.com> 0.999-0.fdr.1
changelog:
  - get rid of distrel munging, buildsys does that...
  - update to 0.999
  - update doc and example tarballs
  - fix build on python <> 2.2
  - use -O1 in install to generate .pyo files instead of manually creating the files
  - require python-abi = pyver to get dependencies right


author: Petr Machata <pmachata@redhat.com> - 4.1.5-4
changelog:
  - remove superfluous multibyte processing in str_append for UTF-8
    encoding (thanks Paolo Bonzini, #177246)


author: Petr Machata <pmachata@redhat.com> - 4.1.5-2
changelog:
  - #185374:
    - Follow symlinks before rename (avoid symlink overwrite)
    - Add -c flag for copy instead of rename (avoid ownership change)


author: Jakub Jelinek <jakub@redhat.com> 4.0.8-3
changelog:
  - if not -n, print current buffer after N command on the last line
    unless POSIXLY_CORRECT (#112952)
  - adjust XFAIL_TESTS for the improved glibc regex implementation
    (#112642)


author: Florian La Roche <Florian.LaRoche@redhat.de>
changelog:
  - update to 4.0.7
  - use "--without-included-regex"
  - do not gzip info pages in spec file, "TODO" is not present anymore


author: Doug Ledford <dledford@redhat.com> - 1.3.2-0.20080728.0355.el5.2
changelog:
  - Fix the openibd init script issue caused by using udevtrigger/udevsettle from
    the Fedora init script (the RHEL udev isn't new enough to safely use this
    method)
  - Resolves: bz465148


author: Doug Ledford <dledford@redhat.com> - 1.3.2-0.el5.20080728.0355.3
changelog:
  - Update the openibd init script to match the one from Fedora (much cleaner
    and easier to verify it is correct to all the standards)


author: Doug Ledford <dledford@redhat.com> - 1.3.2-0.el5.20080728.0355.0
changelog:
  - Make the init script not start the OFED stack by default
  - Add the ifup-ib file so we can support connected mode on ipoib
  - Remove various sleeps in the start/stop process that are no longer necessary
    now that the kernel properly tears down its resources
  - Resolves: bz451452


author: Doug Ledford <dledford@redhat.com> - 1.3-3
changelog:
  - Make the fixup-mtrr.awk script return a value that can be used in the
    init script to determine if we should reload the ib_ipath module


author: Doug Ledford <dledford@redhat.com> - 1.3-2
changelog:
  - Update the openibd init script to work with all hardware
  - Add fixup-mtrr.awk script to solve problems with ipath performance when
    memory type range registers don't allow creation of write-combining
    regions due to lazy BIOS programmers
  - Resolves: bz230035, bz437326, bz438776, bz439080, bz439082


author: Doug Ledford <dledford@redhat.com> - 1.3-1
changelog:
  - Gut the spec, gut the contents, leave only the base package to hold the
    initscripts and configs.  Everything else has been moved into individual
    packages.
  - Related: bz428197


author: Doug Ledford <dledford@redhat.com> - 1.2-5
changelog:
  - Further tweaking of init scripts to make them LSB compliant
  - Bump number to keep this package up to date with the rhel5 openib package


author: Doug Ledford <dledford@redhat.com> 1.2-1
changelog:
  - Update to final OFED 1.2 release
  - Fix init scripts to be standards compliant
  - Related: bz229298, bz182202, bz225581, bz243126


author: Doug Ledford <dledford@redhat.com> 1.1-5
changelog:
  - Fix an unterminated if statement in the ipoibha init script
  - Disable the ipoibtools package since arping is not yet modified to
    support ipoib interfaces and so the package is guaranteed not to work
  - Resolves: #227396


author: Doug Ledford <dledford@redhat.com> 1.1-4
changelog:
  - Change all the scriptlets to be multiline so that they don't cause problems
    on ppc arch
  - Related: #213848, #222227


author: Doug Ledford <dledford@redhat.com> 1.1-3
changelog:
  - Make openib, opensm, and ipoibtools Require(post): chkconfig (182845,182846)
  - Make ipoibha script have an interpreter tag
  - Fix the ipoibha script so it uses arping instead of arpingib and
    passes a functional set of arguments
  - Make ipoibha script require an IP broadcast address on the interface
    we are serving in ha mode
  - Make rdma_ping print rdma_ping instead of rping in it's usage output
  - Make rdma_ping only print the usage info once (213171)
  - Update openibd init script to work whether ipath driver is in one module
    or two (212401)


author: Doug Ledford <dledford@redhat.com> 1.1-2
changelog:
  - Remove a dead patch from the src rpm and rebuild
  - Move the ipoibha tools to /usr/sbin instead of /sbin.  Since they
    require perl to run, and perl resides in /usr, it's safe for them
    to be there instead of /sbin


author: Doug Ledford <dledford@redhat.com> 1.1-0.pre1.3
changelog:
  - The bug fix to make the udev rules file correct for udev 095 got lost,
    readd it.
  - Updates from the old OFED 1.0 code didn't grab all the RPMs because I
    forgot to update the libmthca{,-devel} versions so that the reset
    release number wouldn't cause it to match as older instead of newer.


author: Doug Ledford <dledford@redhat.com> 1.1-0.pre1.2
changelog:
  - Bump version numbers on all the packages to allow for updates
    from previous installations
  - Remove arpingib, it's not needed
  - Add ipoibha init script
  - Rename ipoibha.pl ipoibha for ease of use in init script
  - Drop hpage patch set from ./configure invocation


author: Doug Ledford <dledford@redhat.com> 1.0-10
changelog:
  - Add a logrotate file for /var/log/osm.log to opensm
  - Fix a %post/%postun script problem with dapl


author: Doug Ledford <dledford@redhat.com> 1.0-8
changelog:
  - Rename dat.conf to dat32.conf and dat64.conf so that multilib works properly
  - Patch dat libs to look for the right conf file depending on arch of lib


author: Doug Ledford <dledford@redhat.com> 1.0-7
changelog:
  - Use the action function in the openibd init script
  - Properly load hardware modules if not loaded already on startup
  - Make the output of the status command in the openibd init script more
    useful
  - Correct load/unload order of modules in openibd init script
  - Several other cleanups in the openibd init script


author: Doug Ledford <dledford@redhat.com> 1.0-6
changelog:
  - Skip 1.0-5 to make RHEL5 and FC6 trees match more closely
  - Update udev rules file for later udev version
  - Fix the location of the default osm.log file
  - Remove two modules from the openibd startup script that aren't shipped
    with the RHEL5 kernel


author: Doug Ledford <dledford@redhat.com> 1.0-3
changelog:
  - Gut and rewrite large portions of spec file to make FHS compliant
  - Use default rpmmacros to control file locations
  - Use spec file to control software build, not an external script
  - Make the spec file build what you want by default, not when passed options
  - Make spec file multilib compliant
  - Don't build kernel modules here, the kernel has what it needs
  - Rename packages slightly (no more kernel-ib, this is replaced by openib,
    make a few of the other packages have openib- prepended before their
    name in order to make the connection more noticeable)
  - Update to work with libsysfs >= 2.0.0
  - Many more changes that I forgot


author: Jason Vas Dias <jvdias@redhat.com> - 3.10-1
changelog:
  - fix bug 176720: upgrade to 3.10
  - make .spec file conform to fedora-rpmdevtools spectemplate-perl.spec


author: Ivana Varekova <varekova@redhat.com> 0.99.7-5
changelog:
  - fix problem with previous patch (problem with cb_cal_changed connection)
  - fix problem with add_new_record (problem with cb_cal_changed connection)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - s/Copyright/License/
  - Improve langification
  - mark desktop file as config(noreplace)
  - move dependency on ldconfig from requires to prereq


author: Tim Powers <timp@redhat.com>
changelog:
  - fixd bad dir perms for ~/.jpilot (was creating them as 777, needs to
    be 700 for security purposes
  - no devel package, was a waste to do that when only two files are included
  - use %makeinstall, and predefined macros for dirs so that if
    %configure and %makeinstall change it can be picked up without
    further editing of the files section
  - changed Copyright, it's GPL'ed


author: Tim Powers <timp@redhat.com>
changelog:
  - updated to 0.98
  - bzipped source
  - using percent configure instead of ./configure
  - quiet setup
  - minor spec file cleanups


author: Jindrich Novy <jnovy@redhat.com> 1.76-2
changelog:
  - replace 
    CFLAGS="${CFLAGS:--O2}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2}" ; export FFLAGS ; 
    for i in $(find . -name config.guess -o -name config.sub) ; do 
             [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /bin/rm -f $i && /bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; 
    done ; 
    ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu \
  	--target=noarch-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib64 \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/usr/com \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info with ./configure to prevent definition of
    target, build and host for noarch package


author: Jindrich Novy <jnovy@redhat.com> 1.76-1
changelog:
  - we have separate texi2html package now (#121889)
  - fix Source0
  - BuildArchitectures -> BuildArch
  - create backups for patches


author: Zack Cerza <zcerza@redhat.com> - 0.6.0-1
changelog:
  - New upstream release.
  - Add Requires for xorg-x11-xinit.
  - Add Requires for gnome-python2-gconf.
  - Bump pyspi Requires.


author: Zack Cerza <zcerza@redhat.com> - 0.5.2-1
changelog:
  - New upstream release.
  - Update Requires from Xvfb to xorg-x11-server-Xvfb.
  - Bump pyspi Requires.
  - Remove ImageMagick Requires.
  - Escape post-macro in changelog-macro.


author: Zack Cerza <zcerza@redhat.com> - 0.5.1-1
changelog:
  - Remove BuildRequires on at-spi-devel. Added one on python.
  - Use macros instead of absolute paths.
  - Touch _datadir/icons/hicolor/ before running gtk-update-icon-cache.
  - Require and use desktop-file-utils.
  - postun = post.
  - Shorten BuildArchitectures to BuildArch. The former worked, but even vim's 
    hilighting hated it.
  - Put each *Requires on a separate line.
  - Remove __os_install_post definition.
  - Use Fedora Extras BuildRoot.
  - Instead of _libdir, which kills the build if it's /usr/lib64, use a
    python macro to define python_sitelib and use that.
  - Remove the executable bit on the examples in install scriptlet.
  - Remove call to /bin/rm in post scriptlet.
  - Use dist in Release.


author: Zack Cerza <zcerza@redhat.com> - 0.5.0-2
changelog:
  - It looks like xorg-x11-Xvfb changed names. Require 'Xvfb' instead.
  - Remove Requires on python-elementtree, since RHEL4 didn't have it. The 
    functionality it provides is probably never used anyway, and will most likely
    be removed in the future.
  - Don't run gtk-update-icon-cache if it doesn't exist.


author: Zack Cerza <zcerza@redhat.com> - 0.5.0-1
changelog:
  - New upstream release.
  - Added missing BuildRequires on at-spi-devel.
  - Added Requires on pyspi >= 0.5.3.
  - Added Requires on rpm-python, pygtk2, ImageMagick, xorg-x11-Xvfb, 
    python-elementtree.
  - Moved documentation (including examples) to the correct place.
  - Make sure /usr/share/doc/dogtail is removed.
  - Added 'gtk-update-icon-cache' to %post.


author: Adam Jackson <ajax@redhat.com> 1.4.10-5
changelog:
  - what-the-revert-meant-to-do.patch: Fix up pitch misestimation when better
    modes are filtered away due to hardware limitations. (#508039)


author: Adam Jackson <ajax@redhat.com> 1.4.10-4
changelog:
  - mga-1.4.10-g200se-24-not-32.patch: Prefer 24bpp on G200SE-A due to
    scarce memory bandwidth. (#508039)


author: Adam Jackson <ajax@redhat.com> 1.4.10-1
changelog:
  - Update to 1.4.10 (#479919)
  - mga-1.4.10-shadowfb.patch: Force shadowfb on lowmem G200SE to avoid
    XAA offscreen memory accounting bugs. (#479919)


author: Adam Jackson <ajax@redhat.com> 1.4.2-10
changelog:
  - mga-1.4.2-g200-ev-wb.patch: Even more PLL tweaking for G200SE, only seems to
    be stable when P is a power of two. (#474168)


author: Adam Jackson <ajax@redhat.com> 1.4.2-8
changelog:
  - mga-1.4.2-g200-ev-wb.patch: Add support for G200EV and G200WB, and fix
    DDC on all G200[A-Z][A-Z] parts. (#445497)


author: Adam Jackson <ajax@redhat.com> 1.4.2-6
changelog:
  - mga-1.4.2-g200se-default-mode.patch: Tweak for G200SE to use the settings
    from the default Display subsection in xorg.conf, so that changes from
    s-c-d will make their way into the driver. (#228705)


author: Adam Jackson <ajax@redhat.com> 1.4.2-5.el5
changelog:
  - mga-1.4.2-unbreak-dri.patch: Fix a boolean logic error from the G200SE
    merge that broke DRI on, well, everything else. (#217579)


author: Adam Jackson <ajax@redhat.com> 1.4.2-4.el5
changelog:
  - mga-1.4.2-g200se-default-mode.patch: Fix defaults for G200SE to fit
    1024x768x16 @ 60Hz. (#215949)


author: Adam Jackson <ajax@redhat.com> 1.4.2-3.el5
changelog:
  - mga-1.4.2-g200se-crash.patch: Fix hangs when saving and restoring video.
  - mga-1.4.2-g200se-disable-mtrr.patch: Disable MTRR for PCIE G200SEs.


author: Adam Jackson <ajackson@redhat.com> 1.4.1-4
changelog:
  - mga.xinf updates.  Add G200SE cards, remove Impression and Mistral IDs
    (since they do not and never have worked), and comment each line with
    the appropriate card name.


author: Mike A. Harris <mharris@redhat.com> 1.4.1-3
changelog:
  - Added with_dri conditionalization (not yet working for non-dri case).
  - Added "BuildRequires: libdrm-devel >= 2.0-1" for (#192358).
  - Added "BuildRequires: mesa-libGL-devel >= 6.4-4".
  - Bumped sdk dep to pick up proto-devel indirectly.


author: Mike A. Harris <mharris@redhat.com> 1.2.1.2-1
changelog:
  - Updated xorg-x11-drv-mga to version 1.2.1.2 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.2.0.1-1
changelog:
  - Updated xorg-x11-drv-mga to version 1.2.0.1 from X11R7 RC1
  - Fix *.la file removal.
  - Remove hardware specific {_bindir}/stormdwg utility.


author: Carlo Wood <carlo@gnu.org>
changelog:
  - There should not be a reason anymore to include README.alias in the rpm docs.
  - Don't install as root.root in RPM_BUILD_ROOT, in order to allow to build
    rpm as non-root.
  - Bug fix
  - Added /etc/profile.d for automatic alias inclusion.


author: Carlo Wood <carlo@gnu.org>
changelog:
  - Typo in appended changelog.
  - Appended the old change log of `which-2.0.spec' to (this) changelog,
    which is generated from the CVS log of `which-2.0.spec.in'.
  - Generate which-2.spec from which-2.spec.in with automatic VERSION
    and CHANGELOG substitution.


author: Carlo Wood <carlo@gnu.org>
changelog:
  - Moved assignment of CFLAGS to the configure line, using RPM_OPT_FLAGS now.
  - Corrected Source: line to point to ftp.gnu.org.


author: Steve Dickson <steved@redhat.com> 1.0.9-42
changelog:
  - mountd: Check host alias with netgroups (bz 478952)
  - exportfs: fixed typo in man page (bz 474848)
  - nfs.init: NFS server reboot results in "Stale NFS file handle" (bz 474449) 
  - nfslock.init: options not correctly parsed (bz 459591)
  - mount.nfs: mounts fail with read-only /etc (bz 450646)
  - nfslock.init: lockd not using settings in sysconfig/nfs (bz 434795)
  - tcpwrappers: updated code to correctly use api  (bz 494878)
  - nhfsstone: added v3 and v4 support (bz 465933)
  - mount.nfs: add support for lookupcache= option (bz 489335).


author: Steve Dickson <steved@redhat.com> 1.0.9-40
changelog:
  - Fixed arguments to the hosts_ctl() call in the good_client() 
    routine used in the tcpwrapper support. (bz 440120)


author: Steve Dickson <steved@redhat.com> 1.0.9-39
changelog:
  - Fixed typo in nfs initscript that caused rpc.rquotad daemons
    to be started but not stoppped (bz 470483)


author: Steve Dickson <steved@redhat.com> 1.0.9-38
changelog:
  - The fix to bz 438418 introduced a regression that caused
    mount.nfs to exit with zero on failed mounts. (bz 465966)


author: Steve Dickson <steved@redhat.com> 1.0.9-37
changelog:
  - Added the warning.patch to fix some warning which were
    flaged by rpmdiff during the errata phasea (Errata 2009:8187)

  - Re-enabled tcp wrappers. (bz 440120)


author: Steve Dickson <steved@redhat.com> 1.0.9-36
changelog:
  - Incorrect exit codes from nfs init script (bz 431891)
  - Incorrect a typo in nfsstat --mounted arg (bz 433741)
  - Fixed statd callbacks with the -n arg (bz 451057)
  - Do not display zero stats with nfsstat (bz 437242)
  - Pre-load nfsd when args to rpc.nfsd are given (bz 441983)
  - Increase the number simultaneous krb5 mounts (bz 432879)
  - Have rpc.gssd use file ownership vs uid on cred file (bz 433751)


author: Steve Dickson <steved@redhat.com> 1.0.9-33
changelog:
  - In both rpcgssd and rpcsvcgssd initscrips move the 
    SECURE_NFS check back to be a global check. This
    stops false failures from happen when the services
    are stopped when they are not configured to start (bz 435267)


author: Steve Dickson <steved@redhat.com> 1.0.9-30
changelog:
  - Added in a number of bug fixes (esp in crossmnt code) that were 
    exposed during the secinfo testing. (bz 315401)


author: Steve Dickson <steved@redhat.com> 1.0.9-29
changelog:
  - Added SECINFO support (bz 315401)
  - Reworked init scripts so service will be able to
    stop when some of the checks fail. (bz 295911)


author: Steve Dickson <steved@redhat.com> 1.0.9-27
changelog:
  - Fixed nfs initscript to fail with rpc.mound fails (bz 250622) 
  - Fixed typo in rpc.mountd man page (bz 248543)
  - Turn on 'nohide' automatically for all refer exports (bz 313561)


author: Jeff Layton <jlayton@redhat.com> 1.0.9-26
changelog:
  - Add new mountd mode for handling many netgroups (bz 250609)
  - Change nfs init script to not reset lockd ports on stop (bz 313671)
  - Change nfslock script to use sysctls to set lockd ports (bz 313671)


author: Steve Dickson <steved@redhat.com> 1.0.9-23
changelog:
  - Changed rpcidmapd and rpcgssd stop priority levels so
    those daemons would be stoppped after autofs (bz 245376)
  - Updated some out-of-date man pages (bz 233903)
  - Stoppped mount.nfs from wasting reserve ports (bz 246254)


author: Steve Dickson <steved@redhat.com> 1.0.9-22
changelog:
  - Reworked returns values of the init scripts (bz 243703)
  - Reworked rpc init scripts so they are not dependent
    loading modules. (bz 241015).


author: Steve Dickson <steved@redhat.com> 1.0.9-19
changelog:
  - Make sure the condrestarts exit with a zero value (bz 240352)
  - Added -o nordirplus mount option to disable READDIRPLUS (bz 240357)
  - Stopped /etc/sysconfig/nfs from being overwritten on updates (bz 234543)


author: Steve Dickson <steved@redhat.com> 1.0.9-18
changelog:
  - Fix mount.nfs4 to display correct error message (bz 227212)
  - Fix mount.nfs so mtab is updated (bz 227988)
  - Eliminate timeout on nfsd shutdowns (bz 222001)
  - Eliminate memory leak in mountd (bz 239536)
  - Make sure statd uses correct uid/gid by chowning
    the /var/lib/nfs/statd with the rpcuser id. (bz 235216)
  - Correct some sanity checking in rpc.nfsd. (bz 220887)
  - Fixed mount.nfs mtab lock (bz 227985)
  - Have mountd hold open etab file to force inode number to change (bz 236823)
  - Create a /etc/sysconfig/nfs with all the possible init script
    variables (bz 234543)
  - Changed nfs initscript to exit with correct value (bz 221874)
  - Added userlevel support for v4 relocation support (bz 223053)


author: Steve Dickson <steved@redhat.com> 1.0.9-14
changelog:
  - Doing a connect on UDP sockets causes the linux network
    stack to reject UDP patches from multi-home server with
    nic on the same subnet. (bz 208244)


author: Karel Zak <kzak@redhat.com> 1.0.9-7
changelog:
  - Added support for the mount -s (sloppy) option (#205038)
  - Added nfs.5 man page from util-linux
  - Added info about [u]mount.nfs to the package description


author: <SteveD@RedHat.com> 1.0.9-6
changelog:
  - Removed the compiling of getiversion and getkversion since
    UTS_RELEASE is no longer defined and these binary are
    not installed.


author: <SteveD@RedHat.com> 1.0.9-5
changelog:
  - Changed gssd daemons to cache things in memory
    instead of /tmp which makes selinux much happier.
    (bz 203078)


author: <SteveD@RedHat.com> 1.0.9-2
changelog:
  - Enabled the creating of mount.nfs and umount.nfs binaries
  - Added mount option fixes suggested by upstream.
  - Fix lazy umounts (bz 169299)
  - Added -o fsc mount option.


author: <SteveD@RedHat.com> 1.0.8-3
changelog:
  - Split the controlling of nfs version, ports, and protocol 
    into two different patches
  - Fixed and added debugging statements to rpc.mountd.
  - Fixed -p arg to work with priviledged ports (bz 156655)
  - Changed nfslock initscript to set LOCKD_TCPPORT and
    LOCKD_UDPPORT (bz 162133)
  - Added MOUNTD_NFS_V1 variable to version 1 of the
    mount protocol can be turned off. (bz 175729)
  - Fixed gssd to handel mixed case characters in
    the domainname. (bz 186069)


author: Steve Dickson <SteveD@RedHat.com> 1.0.8.rc2-4.FC5
changelog:
  - Added new libnfsidmap call, nfs4_set_debug(), to rpc.idmapd
    which turns on debugging in the libarary.


author: Steve Dickson <SteveD@RedHat.com> 1.0.8.rc2-3.FC5
changelog:
  - Added innetgr patch that changes configure scripts to 
    check for the innetgr function. (bz 177899)


author: Steve Dickson <SteveD@RedHat.com> 1.0.8.rc2-1.FC5
changelog:
  - Updated to 1.0.8-rc2 release
  - Broke out libgssapi into its own rpm
  - Move librpcsecgss and libnfsidmap in the new nfs-utils-lib rpm
  - Removed libevent code; Required to be installed.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-19
changelog:
  - Updated to latest code in SourceForge CVS
  - Updated to latest CITI patches (1.0.7-4)
  - Fix bug in nfsdreopen by compiling in server defaults


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-18
changelog:
  - Updated libnfsidmap to 0.11
  - Updated libgssapi to 0.5
  - Made sure the gss daemons and new libs are
    all using the same include files.
  - Removed code from the tree that is no longer used.
  - Add ctlbits patch that introduced the -N -T and -U
    command line flags to rpc.nfsd.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-17
changelog:
  - Updated to latest nfs-utils code in upstream CVS tree
  - Updated libevent from 1.0b to 1.1a
  - Added libgssapi-0.4 and librpcsecgss-0.6 libs from CITI


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-16
changelog:
  - Reworked the nfslock init script so if lockd is running
    it will be killed which is what the HA community needs. (bz 162446)
  - Stopped rpcidmapd.init from doing extra echoing when
    condstart-ed.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-12
changelog:
  - Changed useradd to use new -l flag (bz149407)
  - 64bit fix in gssd code (bz 163139)
  - updated broken dependencies
  - updated rquotad to compile with latest
    quota version.


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-4
changelog:
  - Fixed a compile error on x86_64 machines in the gss code.
  - Updated the statd-notify-hostname.patch to eliminate 
    a segmentation fault in rpc.statd when an network 
    interface was down. (bz 151828)


author: Steve Dickson <SteveD@RedHat.com> 1.0.7-3
changelog:
  - Changed xlog to use LOG_INFO instead of LOG_DEBUG
    so debug messages will appear w/out any config
    changes to syslog.conf.
  - Reworked how /etc/exports is setup (bz 151389)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added support to rpcgssd.init and rpcsvcgssd.init scripts
    to insmod security modules.
  - Changed the nfs.init script to bring rpc.svcgssd up and down,
    since rpc.svcgssd is only needed with the NFS server is running.


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Fix problem in idmapd that was causing "xdr error 10008"
    errors (bz 142813)
  - make sure the correct hostname is used in the SM_NOTIFY
    message that is sent from a rebooted server which has 
    multiple network interfaces. (bz 139101)

  - Changed nfslock to send lockd a -KILL signal
    when coming down. (bz 125257)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Replaced a memcopy with explicit assignments
    in getquotainfo() of rquotad to fix potential overflow
    that can occur on 64bit machines. (bz 138068)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added "$RQUOTAD_PORT" variable to nfs.init which
    allows the rpc.rquotad to use a predefined port
    (bz# 124676)


author: <SteveD@RedHat.com
changelog:
  - Incorporate some clean up code from Ulrich Drepper (bz# 134025)
  - Fixed the chkconfig number in the rpcgssd, rpcidmapd, and 
    rpcsvcgssd initscrpts (bz# 132284)


author: <SteveD@RedHat.com>
changelog:
  - Make sure the uid/gid of nfsnobody is the
    correct value for all archs (bz# 123900)
  - Fixed some security issues found by SGI (bz# 133556)


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Major clean up. 
  - Removed all unused/old patches
  - Rename and condensed a number of patches
  - Updated to CITI's nfs-utils-1.0.6-13 patches


author: <SteveD@RedHat.com>
changelog:
  - nfslock stop is now done on package removals
  - Eliminate 3 syslog messages that are logged for
    successful events.


author: <SteveD@RedHat.com>
changelog:
  - Fixed syntax error in nfs initscripts when
    NETWORKING is not defined
  - Removed sync warning on readonly exports.
  - Changed run levels in rpc initscripts.
  - Replaced modinfo with lsmod when checking
    for loaded modules.


author: <SteveD@RedHat.com>
changelog:
  - Removed the auto option from MOUNTD_NFS_V2 and
    MOUNTD_NFS_V3 variables. Since v2 and v3 are on
    by default, there only needs to be away of 
    turning them off.


author: <SteveD@RedHat.com>
changelog:
  - Changed the permission on idmapd.conf to 644
  - Added mydaemon code to svcgssd
  - Updated the add_gssd.patch from upstream


author: <SteveD@RedHat.com>
changelog:
  - Created a pipe between the parent and child so 
    the parent process can report the correct exit
    status to the init scripts
  - Added SIGHUP processing to rpc.idmapd and the 
    rpcidmapd init script.


author: <SteveD@RedHat.com>
changelog:
  - Made the nfs4 daemons initscripts work better when 
    sunrpc is not a module
  - added more checks to see if modules are being used.


author: <SteveD@RedHat.com>
changelog:
  - Added the shutting down of the rpc v4 daemons.
  - Updated the Red Hat only patch with some init script changes.


author: <SteveD@RedHat.com>
changelog:
  - Added the addition and deletion of rpc_pipefs to /etc/fstab
  - Added the addition and deletion of module aliases to /etc/modules.conf


author: <SteveD@RedHat.com>
changelog:
  - Removed gssd tarball and old nfsv4 patch.
  - Added new nfsv4 patches that include both the
     gssd and idmapd daemons
  - Added redhat-only v4 patch that reduces the
     static librpc.a to only contain gss rpc related
     routines (I would rather have gssd use the glibc 
     rpc routines)
  -Changed the gssd svcgssd init scripts to only
     start up if SECURE_NFS is set to 'yes' in
     /etc/sysconfig/nfs


author: Steve Dickson <SteveD@RedHat.com>
changelog:
  - Added the setting of lockd ports via sysclt interface
  - Removed queue setting code since its no longer needed


author: Bob Matthews <bmatthews@redhat.com>
changelog:
  - "service nfs restart" should start services even if currently 
  -   not running (#59469)
  - bump version to 0.3.3-4


author: Bob Matthews <bmatthews@redhat.com>
changelog:
  - don't install any rquota pages in _mandir: (#39707, #44119)
  - don't try to manipulate rpc.rquotad in init scripts 
  -   unless said program actually exists: (#43340)


author: Bob Matthews <bmatthews@redhat.com>
changelog:
  - Fix incorrect file specifications in statd manpage.
  - Require gawk 'cause it's used in nfslock init script.


author: Cristian Gafton <gafton@redhat.com>
changelog:
  - switch to nfs-utils as the base tree
  - fix the statfs patch for the new code base
  - single package that obsoletes everything we had before (if I am to keep
    some traces of my sanity with me...)


author: Ondrej Vasik <ovasik@redhat.com> 2.2.0-4
changelog:
  - don't depend on exact version of docbook-dtds(#233033)
  - remove smp_mflags to prevent build failures(#233028)
  - add disttag


author: Adam Jackson <ajax@redhat.com> 0.9.1-3.20071031
changelog:
  - libpciaccess-fd-cache.patch: Cache sysfs PCI config space file
    descriptors for great boot speed justice.


author: Jiri Skala <jskala@redhat.com> - 4:2.0.1-4
changelog:
  - Resolves: #445381: traceroute gets unaligned access warnings on ia64
  - Resolves: #445571: traceroute-debuginfo package is empty


author: Robert Scheck <redhat@linuxnetz.de> 1.0.3-3
changelog:
  - enable working IPv6 support in traceroute
  - removed old compatibility links, nothing has SUID/SGID
  - added some documentation files
  - don't expand rpm macros in %changelog


author: Xose Vazquez Perez <xose.vazquez@gmail.com> 1.0.3-2
changelog:
  - license is GPL
  - remove S_ISUID from /bin/traceroute
  - description of this implementation
  - s/$RPM_BUILD_ROOT/%{buildroot}
  - man page needs 0644
  - link it agains relative paths, it works over NFS


author: Phil Knirsch <pknirsch@redhat.com> 1.4a12-20
changelog:
  - Added patch from Jesper Skriver supplied by Kaj J. Niemi to support
    draft-ietf-mpls-icmp-02.txt.


author: Preston Brown <pbrown@redhat.com>
changelog:
  - bugfix for segfault with source routing (#13466)
  - fix bug tracerouting thru aliased ethernet addresses (#9351)


author: Patrick "Jima" Laughton <jima@beer.tclug.org> 2.35-1
changelog:
  - Update to 2.35
  - Removed UPGRADING_to_2.0 from %doc as per upstream change
  - Enabled conf-dir in default config as per RFE BZ#214220 (thanks Chris!)
  - Added %dir /etc/dnsmasq.d to %files as per above RFE


author: Patrick "Jima" Laughton <jima@beer.tclug.org> 2.34-2
changelog:
  - Fixed BZ#212005
  - Moved %postun scriptlet to %post, where it made more sense
  - Render scriptlets safer
  - Minor cleanup for consistency


author: Patrick "Jima" Laughton <jima@auroralinux.org> 2.31-1
changelog:
  - Removed dbus config patch (now provided upstream)
  - Patched in init script (no longer provided upstream)
  - Added DBus-interface to docs


author: Patrick "Jima" Laughton <jima@auroralinux.org> 2.30-4.2
changelog:
  - More upstream-recommended cleanups :)
  - Killed sysconfig file (provides unneeded functionality)
  - Tweaked init script a little more


author: Patrick "Jima" Laughton <jima@auroralinux.org> 2.30-4
changelog:
  - Moved options out of init script and into /etc/sysconfig/dnsmasq
  - Disabled DHCP_LEASE in sysconfig file, fixing bug #190379
  - Simon Kelley provided dbus/dnsmasq.conf, soon to be part of the tarball


author: Patrick "Jima" Laughton <jima@auroralinux.org> 2.30-3
changelog:
  - Un-enabled HAVE_ISC_READER, a hack to enable a deprecated feature (request)
  - Split initscript & enable-dbus patches, conditionalized dbus for FC3
  - Tweaked name field in changelog entries (trying to be consistent)


author: Patrick "Jima" Laughton <jima@auroralinux.org> 2.30-2
changelog:
  - Disabled stripping of binary while installing (oops)
  - Enabled HAVE_ISC_READER/HAVE_DBUS via patch
  - Added BuildReq for dbus-devel


author: David Malcolm <dmalcolm@redhat.com> - 2.2.5-1
changelog:
  - 2.2.5
  - Removed gnome-bug-306877-soup-connection-ntlm.c.patch (#160071) as this is 
    now in upstream tarball


author: David Malcolm <dmalcolm@redhat.com> - 2.2.2-1
changelog:
  - update from 2.2.1 to 2.2.2
  - add explicit devel requirements on glib2-devel, pkgconfig, gtk-doc, gnutls-devel and libxml2-devel


author: Jeremy Katz <katzj@redhat.com> 1.99.17-1
changelog:
  - rename package to libsoup
  - update to 1.99.17
  - don't obsolete soup for now, it's parallel installable


author: Jeremy Katz <katzj@redhat.com> 0.7.9-3
changelog:
  - better lib64 patch
  - fix building of libwsdl-build to use libtool so that it gets built 
    with -fPIC as needed


author: Jeremy Katz <katzj@redhat.com> 0.7.4-3
changelog:
  - fix to not try to include non-existent doc files and remove all 
    unwanted files from the build
  - include api docs 
  - don't build the apache module


author: Phil Knirsch <pknirsch@redhat.com> - 5:1.3.3.3-1.el5
changelog:
  - Added missing gettext buildrequires
  - Fixed the XSLT httpd.conf file to be compatible with httpd-2.2 and newer


author: Phil Knirsch <pknirsch@redhat.com> 1.3.3-1
changelog:
  - Rewrote XSLT backend to use libxslt-python instead of 4Suite
  - Fixed wrongly claimed "file has been manually modified" for fresh 1st run
    (#167633)
  - Updated pam config file to latest pam recommendation (#170629)


author: Phil Knirsch <pknirsch@redhat.com> 1.3.2-2
changelog:
  - Fixed the KeepAlive bug that was already fixed as errata for RHEL3 (#137815)
  - Fixed use of True and False instead of gtk.TRUE and gtk.FALSE (#153039)
  - Fixed traceback when no X-server is running
  - Fixed problem with ServerSignature setting (#156639)
  - Removed static /manual alias from httpd.conf template (#144239)
  - Updated gtk.mainloop() and gtk.mainquit() to new API names
  - Added pa translation file (#157826)


author: Phil Knirsch <pknirsch@redhat.com> 1.2.1-1
changelog:
  - Fixed problem with Error documents for non English languages (#115220)
  - Removed deprecated SSLLog and SSLLogLevel parameters (#115221)
  - Fixed SSL stuff (#115223)
  - Fixed not well-formed XSLT file (#119849)
  - Obsoletes redhat-config-httpd (#124106)
  - system-config-httpd docdir now is owned by package (#125750)


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Fixed gnome.url_show() call for help pages (#110128).
  - Updated httpd.conf.xsl to latest httpd package (#107539).


author: Phil Knirsch <pknirsch@redhat.com>
changelog:
  - Include HIG patch from Jens Knutson and fixed remaining problems with it.
  - Really added Crotatin and a few other languages this time (#106601).


author: Phil Knirsch <pknirsch@redhat.com> 1.1.0-5
changelog:
  - Fixed problem with Allow from and Deny from (double from).
  - Included Croation translation (#106601).
  - Big change in 4Suite requires fix for the Xslt processing.


author: Phil Knirsch <pknirsch@redhat.com> 1.0.1-16
changelog:
  - Fixed absolute symlink for config files.
  - Fixed problem with startup error message without X11.
  - Fixed AllowOverride problem.
  - Fixed Listen parameter handling.
  - Fixed Allow and Deny parameter handling.


author: Phil Knirsch <pknirsch@redhat.com> 1.0.1-10
changelog:
  - Fixed missing Alias entry in XSLT conversion file (#71423).
  - Fixed wrong menu entry (apacheconf instead of redhat-config-httpd) (#71424).


author: Trond Eivind Glomsrød <teg@redhat.com> 0.8.1-1
changelog:
  - don't install desktop files in the kontrol-panel directory, it 
    now reads the standard location as well (#52719)
  - nn and no summaries in .desktop files were switched
  - Fix character set for es.po, pt.po and it.po
  - The COPYING filed listed as a doc-file weren't present in the tree
  - Mark various configuration files as %config


author: Philipp Knirsch <pknirsch@redhat.de> 0.8-7
changelog:
  - Added symlink to redhat-config-apache for tool nameing compatibility.
  - Fixed typo in po/pt_BR.po that prevented doing a make dist.


author: Philipp Knirsch <pknirsch@redhat.de> 0.8-4/3
changelog:
  - Fixed not working directory options removal (#45160)
  - Fixed missing libglade-devel build prereq (#44725)
  - Fixed missing ServerAlias entries in vhosts (#44320)


author: Philipp Knirsch <pknirsch@redhat.com> 0.8-3/2
changelog:
  - Fixed some autofoo issues in Makefile.am, specfile and autogen.sh 
  - Fixed Bugzilla bug #40004 (small typo in src/ApacheControl.py)


author: Philipp Knirsch <pknirsch@redhat.com> 0.8-2/1
changelog:
  - Added the Epoch: tag to avoid update problems with previous versions.
  - Added a nice srpm feature in the Makefile.am with which we can now easily
    make SRPMS directly from CVS (borrowed from the kernel CVS Makefile ;)


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-elo2300 to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for elo2300 input driver generated automatically
    by my xorg-driverspecgen script.


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-jamstudio to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for jamstudio input driver generated automatically
    by my xorg-driverspecgen script.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-3
changelog:
  - Ok, even though I _tested_ it, and it worked..  the previous build had a
    broken post, preun, and postun script, due to copy and paste error.  Ugh.
    Also, the script in /usr/bin was broken due to heredoc variable
    interpolation, which I turned off this time so it is generated correctly.
    I removed the post, preun, postun scripts as they are overkill anyway.
    The bug in 0.99.2-2 might cause upgrade or uninstall of the package to
    fail and require manual uninstallation with --noscripts.  Oops.  This
    is what "rawhide" means boys and girls.
  - Added "Requires(pre): filesystem >= 2.3.7-1", to avoid problems with older
    versions of it, and to allow packages that need this workaround to only
    have to set a dependency on xorg-x11-filesystem instead of both packages.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-2
changelog:
  - Updated scripts so that they create the directory even if the symlink was
    not present, to ensure that the dir exists first and avoid theoretical
    case in which, in a single transaction, xorg-x11-filesystem gets installed,
    no symlink or dir is present causing the symlink test to fail, so no dir
    gets created, then another package in the transaction set installs a
    symlink, then a package tries to install a dir and fails.  This should
    guarantee now that these two dirs are really really dirs, not symlinks
    for sure for sure.


author: Mike A. Harris <mharris@redhat.com> 0.99.2-1
changelog:
  - Initial build.
  - Package creates the directories /usr/lib/X11 and /usr/include/X11 and owns
    them as properly flagged dirs in the file manifest.
  - Added identical pre/post/preun/postun scripts which test to see if any of
    of each of /usr/include/X11 /usr/lib/X11 /usr/lib64/X11


author: Miloslav Trmač <mitr@redhat.com> - 0.15-1.el5.1
changelog:
  - Don't stat() paths to all excluded filesystems when encountering a mount point
    Resolves: #237120


author: Doug Ledford <dledford@redhat.com> - 1.0.3-2
changelog:
  - Make scriptlets match mvapich
  - Include a Requires(post) and Requires(preun) so installs work properly
  - Resolves: bz465448


author: Fernando Nasser <fnasser@redhat.com> 0:1.1.1-3jpp
changelog:
  - Add trigger to remove old javamail.jar file from monolithic subpackage
  - Fold -monolithic subpackage into main package to simplify dependency
    specifications in other packages
  - Require update-alternatives to be present during install/uninstall
  - Fix versioned providers jar file name
  - Install/remove alternatives in the monolithic subpackage
  - Fix providers jar names
  - Add AOT bits


author: Fernando Nasser <fnasser@redhat.com> 0:1.1.1-2jpp
changelog:
  - Change handling of alternatives to 6-digit scheme
  - Change handling of javadocs to new %{_netsharedpath} and 
    "/usr/share mounted read only" friendly scheme


author: Fernando Nasser <fnasser@redhat.com> 0:1.1-1jpp
changelog:
  - Upgrade to Classpathx-Mail 1.1
  - Add fix for handling of Mime multipart messages from Archit Shah
    From Gary Benson <gbenson@redhat.com>:
  - Add a javamail-monolithic equivalent.


author: Gary Benson <gbenson@redhat.com> 0:1.0-4jpp_1fc
changelog:
  - Remove now-unnecessary workaround for #132524.
  - Upgrade to 1.0-4jpp.
  - Add a javamail-monolithic equivalent.


author: Thomas Fitzsimmons <fitzsim@redhat.com> 0:1.0-3jpp
changelog:
  - Don't require classpath-inetlib.
  - Require java-sasl and jce.
  - Replace gnu.inet references with org.jpackage.mail.inet.
  - Build inetlib.
  - Include inetlib in providers.jar.


author: Akira TAGOH <tagoh@redhat.com>
changelog:
  - Backport a patch to fix PostScript breakage following the non-monetary
    numeric format from current locale. (#231971)


author: Akira TAGOH <tagoh@redhat.com> - 0.6.6-16
changelog:
  - paps-0.6.6-exitcode.patch: exit immediately with proper exit code
    when unrecoverable error occurs. (#208592)


author: Akira TAGOH <tagoh@redhat.com> - 0.6.6-10
changelog:
  - paps-0.6.6-cpilpi.patch: add --cpi and --lpi option to support the characters
    per inch and the lines per inch.
  - paps-cups.patch: add cpi and lpi support.


author: Tim Waugh <twaugh@redhat.com> - 0.6.6-9
changelog:
  - Fixed font-option patch.
  - Adjusted CUPS patch: CUPS invokes the filter with the destination
    printer name in argv[0], not the binary name.
  - CUPS filter lives in CUPS_SERVERBIN, which is /usr/lib/cups on all
    architectures -- not %{_libdir}/cups.


author: Akira TAGOH <tagoh@redhat.com> - 0.6.6-8
changelog:
  - use dist tag.
  - paps-cups.patch: applied to work paps as CUPS filter.
  - paps-0.6.6-encoding.patch: null-terminates the output.


author: Akira TAGOH <tagoh@redhat.com> - 0.6.6-5
changelog:
  - paps-typo-font-scale.patch: backported from CVS.
  - paps-0.6.6-font-option.patch: integrated --font-family and --font-scale
    options to --font.
  - paps-0.6.6-lcctype.patch: follow LC_CTYPE to determine the default language.


author: Akira TAGOH <tagoh@redhat.com> - 0.6.6-2
changelog:
  - paps-0.6.6-encoding.patch: support --encoding option to be able to convert
    the input file to UTF-8.
  - paps-0.6.6-segfault.patch: fixed a possible segfault issue when reading is
    failed.


author: Akira TAGOH <tagoh@redhat.com> - 0.6.5-1
changelog:
  - New upstream release.
    - paps-0.6.3-fix-pagesize.patch: removed. it has been merged in upstream.
    - paps-0.6.3-goption.patch: removed. it has been merged in upstream.
    - paps-0.6.3-header.patch: removed. it has been merged in upstream.
  - paps-makefile.patch: rework to be applied.


author: Akira TAGOH <tagoh@redhat.com> - 0.6.3-4
changelog:
  - paps-0.6.3-formfeed.patch: applied to deal with the formfeed mark properly.
  - paps-0.6.3-goption.patch: rewritten option parser using GOption. and segfault
    gone as well. (#187205)
  - paps-0.6.3-header.patch: applied to support the output of the page header.


author: Akira TAGOH <tagoh@redhat.com> - 0.6.2-1
changelog:
  - New upstream release.
    - the bitmap font is now ignored. (#176206)
  - paps-0.6.2-fix-bufferoverflow.patch: applied to fix the buffer overflow.


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update to the version in FreeBSD CVS - it's actively maintained, unlike
    the 1993 4BSD version we used to have


author: Martin Stransky <stransky@redhat.com> 2.0.0-2
changelog:
  - added pycairo to Requires
  - compacted card detection
  - fixed info and error dialog boxes
  - fixed configuration loading
  - fixed playback (added script)


author: Martin Stransky <stransky@redhat.com> 1.2.16-3
changelog:
  - fix for #183524 - scsound.log file not created after 
                      failing to configure sound card


author: Martin Stransky <stransky@redhat.com> 1.2.14
changelog:
  - fix for #170073 - Cannot configure snd-dummy
  - fix for #171545 - Please do not hard code file name into
  - fix for #156802 - Menu entry not localized


author: Martin Stransky <stransky@redhat.com> 1.2.12-4
changelog:
  - moved /usr/bin/alsaunmute and /usr/bin/alsacard to /bin
  - removed default_card (#134317)
  - added sorting for cards
  - added HW/SW config switch
  - added log file (/root/scsound.log)
  - added dialog for default audio device
  - set non-blocking mode for aplay


author: - Bastien Nocera <hadess@hadess.net> 1.2.11-1
changelog:
  - unmute the card we're about to play sound for when using ALSA
  - fix setting the volumes with amixer
  - Umute PCM-2 and "DRC Range" as well (#127863) (#146357)
  - Remove unneeded alsa-lib dep (#134319)
  - Remove use of deprecated gtk.FALSE and gtk.TRUE (#153053)
  - Scan the ISA and MacIO buses for soundcards (#146888)
  - Write an asound.conf file even when there's only one soundcard (#134339)
  - Don't crash when we can't find the default soundcard, or the description
    doesn't contain a space (#142801)
  - Use the plughw device to playback the test sample (#134335)


author: Bastien Nocera <bnocera@redhat.com>
changelog:
  - remove useless debug
  - remove use of deprecated Python functions,
  - list USB audio devices
  - don't crash if we can't get the whole maker/model
  - use aplay to play sounds on 2.6 kernels


author: Brent Fox <bfox@redhat.com> 1.1.0-1
changelog:
  - rename from redhat-config-soundcard into system-config-soundcard
  - add Obsoletes for redhat-config-soundcard
  - make changes for Python2.3


author: Marek Kasik <mkasik@redhat.com> - 0.6.0-11
changelog:
  - Fix current page of view when searching
  - plus minor changes to pass rpmdiff
  - Resolves: bug #469379


author: Kristian Høgsberg <krh@redhat.com> 0.5.3-1
changelog:
  - Bump poppler_version to 0.5.2.
  - Package icons and add %post and %postun script to update icon cache.


author: Kristian Høgsberg <krh@redhat.com> 0.5.0-2
changelog:
  - Spec file update from Brian Pepple <bdpepple@ameritech.net> (#123527):
    - Drop Requires for gtk2 & poppler, devel soname pulls these in.
    - Disable GConf schema install in install section.
    - Add BR for gnome-doc-utils, nautilus & libXt-devel.
    - Use smp_mflags.
    - Drop BR for desktop-file-utils,gcc & gcc-c++.
    - Add URL & full source.
    - Use more macros.
    - Fix ownership of some directories.
    - Drop depreciated prereq, and use requires.
    - Use fedora extras preferred buildroot.
    - Various formatting changes.


author: Kristian Høgsberg <krh@redhat.com> 0.3.4-1
changelog:
  - New upstream version again.
  - Add nautilus property page .so's.
  - Stop scrollkeeper from doing what it does.


author: Mike A. Harris <mharris@redhat.com> 7.1-1
changelog:
  - Bump package version to 7.1 to match the X11 release the packages were
    last synced with.
  - Bump build dep to libXaw-devel >= 1.0.2-6, to pick up indirect dependency
    on libXpm-devel which was fixed in that release.


author: Mike A. Harris <mharris@redhat.com> 1.0.1-2
changelog:
  - Fix all SourceN lines in spec file to not have to update them every time.
  - Remove package ownership of mandir/libdir/etc.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-1
changelog:
  - Update all resource utils to version 1.0.0 from X11R7 RC4.
  - Move app-defaults files to _datadir
  - Change manpage dir from man1x to man1 to match RC4 default.
  - Added "BuildRequires: libX11-devel, libXt-devel"


author: Mike A. Harris <mharris@redhat.com> 0.99.1-2
changelog:
  - Add "Obsoletes: XFree86, XFree86-tools, xorg-x11, xorg-x11-tools", as 
    appres, editres used to be in the XFree86/xorg-x11 package, whereas
    oddly enough, the listres, viewres utilities were in the *-tools subpackage.
  - Rebuild against new libXaw 0.99.2-2, which has fixed DT_SONAME. (#173027)


author: Mike A. Harris <mharris@redhat.com> 0.7.1.3-1
changelog:
  - Updated xorg-x11-drv-sisusb to version 0.7.1.3 from X11R7.0
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 0.7.1.2-1
changelog:
  - Updated xorg-x11-drv-sisusb to version 0.7.1.2 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 0.7.0-0
changelog:
  - Initial spec file for sisusb video driver generated automatically
    by my xorg-driverspecgen script.


author: Tomas Mraz - 1.2.0-1
changelog:
  - add lib subpackage to avoid multilib on the base package
  - add ability to compute hmacs on multiple files at once
  - improved debugging with FIPSCHECK_DEBUG


author: Tomas Smetana <tsmetana@redhat.com> - 3:2.1.9-4
changelog:
  - fix #252185 init script prevents proper SELinux domain transitions
  - fix #242672 wrong init script return value


author: John Dennis <jdennis@redhat.com> - 3:2.1.6-1.fc4
changelog:
  - initial port of 2.1.6
    remove mailman-2.1.5-moderator-request.patch, present in new release
    remove mailman-2.1-CAN-2005-0202.patch,       present in new release
    remove mailman-2.1-CAN-2004-1177.patch,       present in new release


author: John Dennis <jdennis@redhat.com> - 3:2.1.5-31.fc4
changelog:
  - fix bug #132750, add daemon to mail-gid so courier mail server will work.
  - fix bug #143008, wrong location of mailmanctl in logrotate
  - fix bug #142605, init script doesn't use /var/lock/subsys


author: John Dennis <jdennis@redhat.com> 3:2.1.5-26
changelog:
  - fix typo in install documentation
  - fix error in templates/Makefile.in, bad install args, fixes bug #136001,
    thank you to Kaj J. Niemi for spotting this.


author: John Dennis <jdennis@redhat.com> 3:2.1.5-21
changelog:
  - move list data dir to /var/lib/mailman to conform to FHS
    move lock dir to /var/lock/mailman to conform to FHS
    move config dir (VAR_PREFIX/data) to /etc/mailman to conform to FHS
    Thanks to Matt Domsch for pointing this out.


author: John Dennis <jdennis@redhat.com> 3:2.1.5-20
changelog:
  - fix bug #132732, security policy violations,
  - bump release verison
    move non-data installation files from /var/mailman to /usr/lib/mailman,
    update documentation


author: John Dennis <jdennis@redhat.com> 3:2.1.5-15
changelog:
  - fix bug #117615, don't overwrite user modified templates on install
    made template directory "config noreplace"


author: John Dennis <jdennis@redhat.com> 3:2.1.5-14
changelog:
  - add comments into the crontab files so users know the /etc/cron.d
    file is volitile and will edit the right file.
    Also make the master crontab file "config noreplace" so edits are preserved.


author: John Dennis <jdennis@redhat.com> 3:2.1.5-10
changelog:
  - fix bug #129492 and bug #120912
    stop using crontab to setup mailman's cron jobs,
    instead install cron script in /etc/cron.d


author: John Dennis <jdennis@redhat.com> 3:2.1.5-9
changelog:
  - apply patch to elminate "-1 LISTNAME moderator request(s) waiting" messages
    problem desciption here:
    http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq03.038.htp


author: John Dennis <jdennis@redhat.com> - 3:2.1.5-6
changelog:
  - fix bug in pre scriplet, last command had been "service mailman stop"
    which should have been harmless if mailman was not installed except
    that it left the exit status from the script as non-zero and rpm
    aborted the install.


author: John Dennis <jdennis@redhat.com> - 3:2.1.5-5
changelog:
  - add status reporting to init.d control script
    stop mailman during an installation
    restart mailman if it had been running prior to installation


author: John Dennis <jdennis@redhat.com> 3:2.1.5-1
changelog:
  - bring up to latest 2.1.5 upstream release
    From Barry Warsaw: Mailman 2.1.5, a bug fix release that also
    contains new support for the Turkish language, and a few minor new
    features. Mailman 2.1.5 is a significant upgrade which should
    improve disk i/o performance, administrative overhead for discarding
    held spams, and the behavior of bouncing member disables.  This
    version also contains a fix for an exploit that could allow 3rd
    parties to retrieve member passwords.  It is thus highly recommended
    that all existing sitesupgrade to the latest version


author: Warren Togami <wtogami@redhat.com> 3:2.1.4-4
changelog:
  - #105638 fix bytecompile and rpm -V
  - postun /etc/postfix/aliases fix
  - clean uninstall (no more empty dirs)
  - #115378 RedirectMatch syntax fix


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - fix bug 72004, 74483, 74484, 87856 - improper log rotation
  - fix bug 88083 - mailman user/group needed to exist during build
  - fix bug 88144 - wrong %file attributes on mm_cfg.py
  - fix bug 89221 - mailman user not created on install
  - fix bug 89250 - wrong pid file name in initscript


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - various small tweaks to the spec file to make installation cleaner
  - use /usr/bin/python when compiling, redirect compile output to /dev/null,
  - don't run update in %post, let the user do it, remove the .pyc files in %postun,
  - add setting of MAILHOST and URLHOST to localhost.localdomain, don't let
  - configure set them to the build machine.


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - 1) remove config patch, mailmanctl was not the right file to install in init.d,
  - it needed to be scripts/mailman
  - 2) rename httpd-mailman.conf to mailman.conf, since the file now lives
  - in httpd/conf.d directory the http prefix is redundant and inconsistent
  - with the other file names in that directory.


author: John Dennis <jdennis@finch.boston.redhat.com>
changelog:
  - Bring package up to date with current upstream source, 2.1
  - Fix several install/packaging problems that were in upstream source
  - Add multiple mail group functionality
  - Fix syntax error in fblast.py
  - Remove the forced setting of mail host and url host in mm_cfg.py


author: Nalin Dahyabhai <nalin@redhat.com> 2.0.9-1
changelog:
  - include README.QMAIL in with the docs (#58887)
  - include README.SENDMAIL and README.EXIM in with the docs
  - use an included httpd.conf file instead of listing the configuration
    directives in the %description, which due to specspo magic might look
    wrong sometimes (part of #51324)
  - interpolate the DEFAULT_HOST_NAME value in mm.cfg into both the DEFAULT_URL
    and MAILMAN_OWNER (#57987)
  - move logs to /var/log/mailman, qfiles to /var/spool/mailman, rotate
    logs in the log directory (#48724)
  - raise exceptions when someone tries to set the admin address for a list
    to that of the admin alias (#61468)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix a default permissions problem in /var/mailman/archives/private,
    reported by Johannes Erdfelt
  - update to 2.0.9


author: Nalin Dahyabhai <nalin@redhat.com> 2.0.8-1
changelog:
  - set FQDN and URL at build-time so that they won't be set to the host the
    RPM package is built on (#59177)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to 2.0.5
  - change the default hostname from localhost to localhost.localdomain in the
    default configuration
  - chuck configuration file settings other than those dependent on the host name
    (the build system's host name is not a good default)  (#32337)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - make the default owner root again so that root owns the docs
  - update to 2.0beta5, which fixes a possible security vulnerability
  - add smrsh symlink


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - update to beta4
  - change uid/gid to apache.apache to match apache (#13593)
  - properly recompile byte-compiled versions of the scripts (#13619)
  - change mailman alias from root to postmaster


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - move web files to reside under /var/www
  - move files from /usr/share to /usr/share
  - integrate spot-fixes from mailman lists via gnome.org


author: Akira TAGOH <tagoh@redhat.com> - 2.0.1-1
changelog:
  - New upstream release.
  - use dist tag.
  - kasumi-2.0.1-errorcode.patch: fixed not working when the private dictionary is empty. (#197313)


author: Akira TAGOH <tagoh@redhat.com> - 1.0-1
changelog:
  - New upstream release.
  - kasumi-1.0-gcc41.patch: build with -ffriend-injection to temporarily get it
    built with gcc-4.1.


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-summa to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for summa input driver generated automatically
    by my xorg-driverspecgen script.


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-ur98 to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0.2-1
changelog:
  - Updated xorg-x11-drv-ur98 to version 1.0.0.2 from X11R7 RC2
  - Fix *.la file removal.
  - Update file manifest to find manpages in 'man4x' dir.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for ur98 input driver generated automatically
    by my xorg-driverspecgen script.


author: Donnie Barnes <djb@redhat.com>
changelog:
  - ALRIGHT!  Woo-hoo!  Erik already did the install-info stuff!
  - added BuildRoot
  - spec file cleanups


author: Ray Strode <rstrode@redhat.com> - 0.16.4-3
changelog:
  - dont change to vt 1 on exit.  Adam Jackson says its dead
    code and X will always do the right thing.
  - change the colors to be more red
  - remove some code to invoke interactive bash shell as part of
    startup process (bug 209457)


author: Ray Strode <rstrode@redhat.com> - 0.16.3-6
changelog:
  - don't SIGKILL X server
  - wait for signal from X server that it's ready instead of
    just launching it an hoping for the best
  - only vt switch if things go bad, X and gdm will handle 
    making sure the right vt is active.
  - don't ever change the busy cursor to not busy (if we're not
    busy then rhgb shouldn't be running).


author: Mike A. Harris <mharris@redhat.com> 0.16.3-5
changelog:
  - Bump libxf86config-devel dep to ensure the fix for (#198653) is present.
  - Ensure the package has ownership of the dirs it creates.
  - Use Fedora Extras style BuildRoot tag.


author: Ray Strode <rstrode@redhat.com> - 0.16.3-4
changelog:
  - remove erroneous space from x conf filename.  Problem discovered
    from Mary Ellen Foster <mefoster@gmail.com> (bug 196885)


author: Ray Strode <rstrode@redhat.com> 0.16.2-13
changelog:
  - Don't run /sbin/chvt and never call waitpid on child.  Instead
    just change vts using the VT_ACTIVATE ioctl.  Patch from Peter
    Jones <pjones@redhat.com>.
  - Get rid of some other calls to waitpid and just let glib
    handle it.  The code was ignoring the return values anyway...
  - add a buildreq on libxf86config-devel


author: Ray Strode <rstrode@redhat.com> 0.16.2-10
changelog:
  - Don't switch out of details view if the user switched into
    it intially.  Patch from Mary Ellen Foster <mefoster@gmail.com>
    (bug 151239).


author: Ray Strode <rstrode@redhat.com> 0.16.2-9
changelog:
  - add BuildRequires: gettext
  - don't build in-tree copy of gtkexpander.c
  - don't switch to vt1 automatically after 35 seconds (bug 135783)


author: Daniel Veillard <veillard@redhat.com> 0.16.1
changelog:
  - switch to display :9 to fix #139704
  - delay creation of the fifo after X initialization to avoid deadlock
    with initscripts if X fails to start #135574
  - cleanup in case of deadly signal received
  - improved the debugging layer to chase aformentioned bugs.
  - po/*: update the translations


author: Elliot Lee <sopwith@redhat.com> 0.13.5-2
changelog:
  - rhgb-0.13.5-firstboot patch - don't do a timeout while we're running firstboot- Use _smp_mflags macro


author: Daniel Veillard <veillard@redhat.com> 0.13.2
changelog:
  - add support for specific conf file in /etc/rhgb/xorg.conf #131063
  - avoid dropping back to text mode between rhgb end and gdm #108665


author: Daniel Veillard <veillard@redhat.com> 0.13.1
changelog:
  - fix vt1 switching #131899
  - fix fsck reporting, exporing it to the vte, requires a patch to
    initscript too #107121, #129881
  - move temp fielsystem to /etc/rhgb/temp
  - provide a mechanism to output to the detailed view
  - automatically switch to detailed view or vt1 on timeouts


author: Karel Zak <kzak@redhat.com> 3.1.5-9
changelog:
  - fix numeric conversion problem (patch by Aharon Robbins)
    http://lists.gnu.org/archive/html/bug-gnu-utils/2006-07/msg00004.html


author: Karel Zak <kzak@redhat.com> 3.1.5-5
changelog:
  - fix "gawk -v BINMODE=1" (patch by Aharon Robbins)
  - fix conversion from large number to string (patch by Aharon Robbins)


author: Karel Zak <kzak@redhat.com> 3.1.5-4
changelog:
  - fix off-by-one error in assignment of sentinel value at 
    end of FIELDWIDTHS array. (patch by Aharon Robbins)


author: Karel Zak <kzak@redhat.com> 3.1.4-2
changelog:
  - add dfacache.patch for fix LC_ALL=de_DE.UTF-8 ./gawk '/^[ \t]/ { print }',
    (by Aharon Robbins), #135210, #131498
  - add flonum.patch for "improved" handling of non-numeric constants,
    second version of patch (by Aharon Robbins)
    http://lists.gnu.org/archive/html/bug-gnu-utils/2004-10/msg00046.html
  - add nextc.patch (by Andreas Schwab)
    http://lists.gnu.org/archive/html/bug-gnu-utils/2004-09/msg00093.html
  - add uplow.patch for fix the wide char handling (by Stepan Kasal)
    http://lists.gnu.org/archive/html/bug-gnu-utils/2004-10/msg00099.html


author: Elliot Lee <sopwith@redhat.com> 3.1.1-7
changelog:
  - Add gawk-3.1.1-ngroups.patch, because NGROUPS_MAX comes from 
  sys/param.h, and awk.h changes behaviour depending on whether NGROUPS_MAX 
  is defined or not. (For ppc64)


author: Trond Eivind Glomsrod <teg@redhat.com>
changelog:
  - /usr/bin/gawk can't point at gawk - infinite symlink
  - /usr/bin/awk can't point at gawk - infinite symlink


author: Ivana Varekova <varekova@redhat.com> - 2.39-15
changelog:
  - Related: #522761
    fix some typos
  - Related: #517309
    add the description of --version and -c
  - Related: #497197
    change the description


author: Ivana Varekova <varekova@redhat.com> - 2.39-13
changelog:
  - Resolves: #443059
    add short note about /usr/bin/time x bash time confusion
  - Resolves: #452290
    add the description of the 42th parameter of /proc/[pid]/stat
  - Resolves: #456219
    fix the links to documentation
  - Resolves: #468897
    add posix manual notice to posix man-pages
  - Resolves: #471176
    add additional note to LOG_KERN in syslog(3) man-page
  - Resolves: #474238
    add pthread_setaffinity_np(3) man page
  - Resolves: #497197
    fix the description of /proc/sys/fs/file-nr file
  - Resolves: #515346
    fix typo in gai.conf(5) man-page
  - Resolves: #517309
    add --version option to zdump(8) man page
  - Resolves: #518984
    fix statfs(2) man page
  - Resolves: #522761
    fix nsswitch.conf(5) man page
  - Resolves: #524246
    fix ip(7) man page
  - Resolves: #527196
    proc(5) fix info about the restricton in /proc/sys/fs/file-max file


author: Ivana Varekova <varekova@redhat.com> - 2.39-11
changelog:
  - Resolves: #444540
    fix rint.3 man page
  - Resolves: #248405
    fix open.2 man page
  - Resolves: #450186
    add notification to malloc_hook.3
  - Resolves: #439199
    add scopev4 description to gai.conf.5
  - Resolves: #436398
    man pages imply STREAMS is implemented
  - Resolves: #402181
    improve gethostid.2 man-page
  - Resolves: #392401
    fix connect.2 man-page
  - Resolves: #357921
    update intro.2 man page, add _syscall.2 man page
  - Resolves: #449156
    update ptrace.2 man page - thanks Anoop
  - Resolves: #361611
    update proc.5 man page


author: Stepan Kasal <skasal@redhat.com> - 2.39-10
changelog:
  - fix inconsistent arg names in splice.2
  - Resolves: #232172
  - add man-pages-2.43-swapon.patch
  - Resolves: 222493
  - Remove the deprecated pciconfig_*.2 man pages.
  - Resolves: #219827
  - Add man-pages-2.39-_syscallX.patch, macros _syscall0 et al. are no longer
    available.
  - Resolves: #230554 and 235206
  - Add man-pages-2.39-rt_sigprocmask.patch
  - Resolves: #219074


author: Ivana Varekova <varekova@redhat.com> 2.39-6
changelog:
  - add getunwind.2, kexec_load.2, move_pages.2, perfmonctl.2, 
    spu_create.2, spufs.2, spu_run.2 and  vserver.2 man pages


author: Ivana Varekova <varekova@redhat.com> 2.39-4
changelog:
  - add (get/set)_robust_list.2 man pages
  - add add_key.2, keyctl.2, request_key.2 man pages 
      (removed from keyutils-libs-devel package)
  - add tux.2 man page
      (removed from tux package)


author: Ivana Varekova <varekova@redhat.com> 2.36-1
changelog:
  - add nscd_conf options (nscd_conf.patch)
  - added {create,query}_module.2, get_kernel_syms.2 man-pages 
  - added nscd, getrlimit, libaio and write patch
  - remove sigprocmask patch
  - update to 2.36


author: Ivana Varekova <varekova@redhat.com> 2.07-6
changelog:
  - man pages updated for new audit system (added missing man-pages 
  of some syscalls) (see bug 159225)


author: Jiri Ryska <jryska@redhat.com> 2.05-1
changelog:
  - update to 2.05
  - atanh(3) fix
  - issue(5) fix
  - ldd(1) fix
  - removed man1p/{compress,uncompress,renice}.1p


author: Jiri Ryska <jryska@redhat.com> 1.67-7
changelog:
  - io_setup() and io_destroy() pages now refers to header file
  - fixed types for struct shmid_ds in shmget(2) and shmctl(2)
  - fixed pages for readv(2) and writev(2)


author: Jindrich Novy <jnovy@redhat.com> 1.67-6
changelog:
  - unify fs.5 patches together to get rid of the bogus
    fs.5.orig.gz shipped among man5 pages
  - bump release to 6 to avoid conflicts with RHEL4/FC3 man-pages


author: Adrian Havill <havill@redhat.com> 1.67-2
changelog:
  - updated to latest
  - getrpcent/setrpcent typo (#73836)
  - add new resolver.5 page (#126557)
  - add SHM_HUGETLB option to shmget (#128837)


author: Adrian Havill <havill@redhat.com> 1.60-4
changelog:
  - transliterated ALL pages with latin-1 characters that would be
    displayed as either a fallback from a ascii-superset locale or
    from the POSIX locale into ascii (according to glibc transliteration
    data for locale "en"). pages with non-ascii are moved into the "en"
    locale. (#103214)


author: Adrian Havill <havill@redhat.com> 1.60-1
changelog:
  - bumped version, removed no longer needed patches
  - added #define for re_comp() and re_exec() (#79703)
  - fixed typo in Era format specifier (#80025)
  - fixed ftell info for fopen with mode "a+" (#81359)
  - fixed prototype for shmget() (#86258)
  - fixed spelling in wait.2 (#86450)
  - obsoleted _init and _fini in dlopen() (#88408)
  - fixed and merged double ext3 descriptions (#103198)
  - issue to refer to mingetty (#86248)
  - synced man page with actual ld params (#97176)


author: Ernie Petrides <petrides@redhat.com>
changelog:
  - Modify mlock.2, mlockall.2, and shmctl.2 for change to locking
    permission semantics made in kernel's linux-2.4.21-mlock.patch.


author: Trond Eivind Glomsrød <teg@redhat.com> 1.48-2
changelog:
  - Remove getipnodebyname, getipnodebyname, freehostent - they were
    only briefly part of a glibc devel version (#62646)


author: Trond Eivind Glomsrød <teg@redhat.com> 1.41-1
changelog:
  - 1.41
  - Remove bug section in llseek.2, which claimed ext2 don't support
    files bigger than 2 GB (#54569)


author: Trond Eivind Glomsrød <teg@redhat.com> 1.39-2
changelog:
  - New strptime.3, from the ftp site. Matches glibc better.
  - Fix missing .br in netdevices.7 (#53091)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Remove diff.1 - let diffutils include it instead
  - Remove capget.2 - it's included in libcap
  - Keep resolv.conf.5 - it's useful on systems without bind packages
  - Fix bootparam.7 (patch from Tim Waugh (twaugh@redhat.com)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - correct the URL for unicode in the charset manpage (#34291)
  - roff fixes
  - redo iconv patch, so we don't get a .orig from patch because of
    a two line offset


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - 1.33
  - obsolete some old, now included patches
  - remove netman-cvs, it's now older than the mainstream


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - don't delete the man pages for dlopen() and friends, 
    they are no longer part of another package
  - include man pages for ld*


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - fixed bad header specification (#15364)
  - removed obsolete patches from package
  - updated the rest


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - use %{_mandir) instead of /usr/man
  - verify and fix bug in mmap man page (#7382)
  - verify and fix missing data in recvfrom man page (#1736)
  - verify and fix missing data in putw man page (#10104)
  - fixed sendfile(2) man page (#5599)
  - fixed tzset man page (#11623)


author: Tim Waugh <twaugh@redhat.com> 1.6-2
changelog:
  - New archive from Sebastian.
  - Run fmtutil in %post and %postun.
  - Require new xmltex.
  - Fix body-start().


author: PLD Team <pld-list@pld.org.pl>
changelog:
  All persons listed below can be reached at <cvs_login>@pld.org.pl

  $Log: passivetex.spec,v $
  Revision 1.8  2001/08/21 10:12:42  wrobell
  - ver. 1.6
  - stb

  Revision 1.7  2001/03/27 16:55:44  wiget
  Requires xmltex

  Revision 1.6  2001/03/27 16:53:29  wiget
  changed Source URL, updated to 1.5 version, more files in package; now passivetex is more powerfull and work ;-)

  Revision 1.5  2001/01/27 03:25:36  kloczek
  - added tetex to Prerq,
  - simplified %post, %postun.

  Revision 1.4  2001/01/27 00:08:39  klakier
  - added URL

  Revision 1.3  2001/01/27 00:07:47  klakier
  - added URL

  Revision 1.2  2001/01/24 12:41:17  klakier
  - small fixes

  Revision 1.1  2001/01/24 12:31:43  klakier
  - initial


author: Tomas Mraz <tmraz@redhat.com> 0.9.7a-7
changelog:
  - fixed sha1 on 2gb boundary (patch from upstream) (#189492)
  - enable compilation of updated assembler code on IA64 (#180091)
  - correct verification of CA certs in SSL (#201005)


author: Tomas Mraz <tmraz@redhat.com> 0.9.7a-6
changelog:
  - fix a few rpmlint warnings
  - fix build if 'rand' or 'passwd' in buildroot path (#178782)
  - make libica build in brew


author: Tomas Mraz <tmraz@redhat.com> 0.9.7a-4
changelog:
  - fix CAN-2005-2969 - remove SSL_OP_MSIE_SSLV2_RSA_PADDING which
    disables the countermeasure against man in the middle attack in SSLv2
    (#169863)
  - more fixes for constant time/memory access for DSA signature algorithm
  - updated ICA engine patch


author: Tomas Mraz <tmraz@redhat.com> 0.9.7a-3
changelog:
  - fix CAN-2005-0109 - use constant time/memory access mod_exp
    so bits of private key aren't leaked by cache eviction (#157631)


author: Guillaume Rousse <guillomovitch@users.sourceforge.net> 1.0.1-1jpp
changelog:
  - 1.0.1
  - versioned dir for javadoc
  - no dependencies for and javadoc package
  - adaptation for new servlet3 package
  - drop j2ee package
  - regenerated the patch
  - section package


author: Guillaume Rousse <guillomovitch@users.sourceforge.net> 1.0-4jpp
changelog:
  - javadoc into javadoc package
  - Requires and BuildRequires servletapi3 >= 3.2.3-2
  - regenerated the patch


author: Tim Waugh <twaugh@redhat.com> 0.0.12-2
changelog:
  - Disable magic encoding detection, since the stylesheets don't handle
    it well at all (bug #80732).


author: Tim Waugh <twaugh@redhat.com> 0.0.11-1
changelog:
  - 0.0.11.
  - xmlto.mak no longer needed.
  - CVS patch no longer needed.
  - Update docbook-xsl requirement.
  - Ship xmlif.
  - Run tests.
  - No longer a noarch package.


author: Ray Strode <rstrode@redhat.com> - 1:2.16.0-49
changelog:
  Resolves: #474588
  - Don't crash if defined extended input device is unplugged
    Patch by Olivier Fourdan.


author: Ray Strode <rstrode@redhat.com> - 1:2.16.0-46
changelog:
  Resolves: #215855
  - Work around issue in SECMOD_CancelWait() that was preventing
    smart card helper from exiting


author: Ray Strode <rstrode@redhat.com> - 1:2.16.0-42
changelog:
  Resolves: #223192
  - Drop even more consoles message translations that were found
    during qa testing


author: Ray Strode <rstrode@redhat.com> - 1:2.16.0-40
changelog:
  Resolves: #210827
  - Only honor cancel requests when blocking in the pam conversation
    waiting for user input (the only time it makes sense to cancel).
    Doing it at other times was causing spurious "authentication failure"
    messages.


author: Ray Strode <rstrode@redhat.com> - 1:2.16.0-38
changelog:
  Resolves: #223192
  - Drop translations of console messages in locales that the console
    doesn't support


author: Ray Strode <rstrode@redhat.com> - 1:2.16.0-35
changelog:
  Resolves: #232896
  - Remove unneccesary code that was creating spurious audit
    entries.  Patch by Tomas Mraz.
  - apply patch mentioned in last changelog entry


author: Ray Strode <rstrode@redhat.com> - 1:2.16.0-30
changelog:
  Resolves: #220370
  - add function prototypes to fix crash in language selector on
  x86-64.  Patch by Bill Nottingham.


author: Ray Strode <rstrode@redhat.com> - 1:2.16.0-24
changelog:
  Resolves: #210378
  - The patch from -23 and -23 needed a bit of work to get the
    entire screen to update.


author: Ray Strode <rstrode@redhat.com> - 1:2.16.0-16.el5
changelog:
  - have security token monitor helper process kill itself when
    the communication pipe to the main process goes away (bug
    210677).


author: Ray Strode <rstrode@redhat.com> - 1:2.16.0-15.el5
changelog:
  - desensitize entry fields until pam asks for input, so if pam
    doesn't initially ask for input (like in smart card required
    mode) the user can't type something and confuse gdm (bug 201344)


author: Karsten Hopp <karsten@redhat.com> - 1:2.15.10-2.fc6
changelog:
  - buildrequire inttools as this isn't a requirement of scrollkeeper anymore
    and thus missing from the buildroot


author: Ray Strode <rstrode@redhat.com> - 1:2.15.6-14
changelog:
  - fix face browser
    (http://bugzilla.gnome.org/show_bug.cgi?id=349640)
  - fix error message reporting
    (http://bugzilla.gnome.org/show_bug.cgi?id=349758)


author: Ray Strode <rstrode@redhat.com> - 1:2.15.6-13
changelog:
  - simply all the security token code by only using one pam stack
  - drop lame kill on token removal feature


author: Ray Strode <rstrode@redhat.com> - 1:2.15.6-12
changelog:
  - move authcookies out of home directories to prevent problems
    on nfs/afs mounted home directories (bug 178233).


author: Ray Strode <rstrode@redhat.com> - 1:2.15.6-6
changelog:
  - fix off-by-one in the process-all-ops patch that was causing
    an anoying dialog to pop up on each login


author: Ray Strode <rstrode@redhat.com> 1:2.15.5-2
changelog:
  - add patch to process all operations when more than one comes
    in really quickly
  - move default "Please enter your username" message to the
    greeter instead of the slave so that it doesn't get stacked if
    a pam module has a non default message
  - add new message for reseting the current login operation
    (like the cancel button does, but accessible via the gdm fifo)


author: Ray Strode <rstrode@redhat.com> - 1:2.13.0.9-1
changelog:
  - Update to 2.13.0.9
  - Use new %post section, written by 
    Michal Jaegermann <michal@harddata.com> (bug 183082)


author: Ray Strode <rstrode@redhat.com> - 1:2.13.0.7.0.2006.02.12-1
changelog:
  - update to cvs snapshot
  - move gdm to /etc instead of /etc/X11
  - move custom gdm.conf to sysconfdir instead of symlinking from
    datadir (bug 180364)


author: Ray Strode <rstrode@redhat.com> - 1:2.13.0.4-3
changelog:
  - migrate X server configuration for pre-modular X configurations.
    Problems reported by Dennis Gregorovic <dgregor@redhat.com>


author: Ray Strode <rstrode@redhat.com> - 1:2.8.0.4-11
changelog:
  - Don't use X session / setup files anymore.
  - Don't install early login init scripts
  - remove xsri dependency
  - don't prune language lists anymore


author: Ray Strode <rstrode@redhat.com> 1:2.8.0.4-7
changelog:
  - zero-initialize message buffer,
    bug fixed by Josh Parson (jbparsons@usdavis.edu) (bug 160603)
  - fix typo in redhat-artwork requires line


author: Ray Strode <rstrode@redhat.com> 1:2.8.0.4-5
changelog:
  - bump redhat-artwork requirement to get rid of the boot
    throbber for now, since it seems to have reappeared
    mysteriously (bug 171025)


author: Ray Strode <rstrode@redhat.com> 1:2.6.0.8-16
changelog:
  - Make sure username/password incorrect message gets displayed
    (bug 158127).
  - reread system locale before starting gdm in early login mode 
    (bug 158376).


author: Ray Strode <rstrode@redhat.com> 1:2.6.0.8-12
changelog:
  - Fix processing of non-ascii characters that got broken
    in 2.6.0.8-11, found by Miloslav Trmac <mitr@redhat.com>,
    (bug 156590).


author: Ray Strode <rstrode@redhat.com> 1:2.6.0.8-11
changelog:
  - Fix halt command (bug 156299)
  - Process all messages sent to the greeter in a read, not just
    the first


author: Ray Strode <rstrode@redhat.com> 1:2.6.0.8-9
changelog:
  - Change default standard greeter theme to clearlooks and 
    default graphical greeter theme to Bluecurve specifically.

  - Change default path values (bug 154280)


author: Ray Strode <rstrode@redhat.com> 1:2.6.0.8-7
changelog:
  - calling gdm_debug and g_strdup_printf from signal handlers are
    bad news (Spotted by Mark McLoughlin <markmc@redhat.com>).


author: Matthias Clasen <mclasen@redhat.com> 1:2.6.0.8-4
changelog:
  - Don't do early-login if firstboot is going to run
  - Make early-login work with timed and automatic logins


author: Ray Strode <rstrode@redhat.com> 1:2.6.0.8-2
changelog:
  - touch /var/lock/subsys/gdm-early-login so gdm gets killed on
    runlevel changes (bug 154414)
  - don't try to use system dpi settings for canvas text (bug 127532)
  - merge resource database from displays other than :0


author: Ray Strode <rstrode@redhat.com> 1:2.6.0.5-9
changelog:
  - Look up and use username instead of assuming that user entered 
    login is cannonical.  Patch from
    Mike Patnode <mike.patnode@centrify.com> (fixes bug 141380).


author: Mark McLoughlin <markmc@redhat.com> - 1:2.6.0.0-3
changelog:
  - Update the "use switchdesk" message to only be display when
    switchdesk-gui is installed and to not reference a non existant
    menu item (bug #121460)


author: Colin Walters <walters@redhat.com> 1:2.6.0.0-2
changelog:
  - Always put session errors in /tmp, in preparation for
    completely preventing gdm from writing to /home/


author: Warren Togami <wtogami@redhat.com> 1:2.4.4.5-8
changelog:
  - patch30 xdmcp_session counter fix from gdm-2.5.90.0 #110315
  - automake14 really needed, not automake
  - BR libcroco-devel, libcroco-devel, libattr-devel, gettext
  - conditionally BR libselinux-devel
  - explicit epoch in all deps
  - make the ja.po time format change with a sed expression rather than
    overwriting the whole file (Petersen #113995)


author: George Lebl <jirka@5z.com> 1:2.4.2.102-1
changelog:
  - updated to 2.4.2.102
  - removed outdated patches
  - Use Xsetup_0 only for :0 since that's the way it works
    for xdm
  - remove the gnome.desktop file, its going into gnome-session


author: Havoc Pennington <hp@redhat.com> 1:2.4.1.6-1
changelog:
  - update to latest bugfix version on george's advice
  - remove setlocale patch that's upstream
  - remove console setup patches that are upstream


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Run the error dialogs under /bin/sh --login, so we
    get lang.sh, and thus unicode_start running. Fixes
    the X-doesn't-start dialog showing up as random
    blinking characters.


author: Matt Wilson <msw@redhat.com> 1:2.4.1.1-3
changelog:
  - fix pam.d entry, pam_env wasn't properly patched
  - disable optimizations on x86_64 to work around gcc bug


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 2.4.1.0
  - add patch from george to ask "are you sure?" for shutdown/reboot since it's now just one click away


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 2.4.0.12
  - update new patch for no-utf8-in-cjk
  - drop patch to photo setup, now upstream
  - drop confdocs patch now upstream
  - move all the gdm.conf changes into single "rhconfig" patch
  - remove "sid-fix" patch now upstream


author: Nalin Dahyabhai <nalin@redhat.com> 2.4.0.7-14
changelog:
  - remove the directory part of module specifications from the PAM config files,
    allowing the same PAM config to work for either arch on multilib boxes


author: Havoc Pennington <hp@redhat.com>
changelog:
  - put /usr/X11R6/bin in path for now fixes #72781
  - use proper i18n algorithm for word wrap, #71937
  - remove greek text from language picker due to lack 
    of greek font
  - reorder PAM config file #72657


author: Havoc Pennington <hp@redhat.com>
changelog:
  - improve gdmsetup icon
  - remove GNOME session, we will instead put it in gnome-session
  - apply patch from george to make gdmphotosetup file selector 
    work


author: Elliot Lee <sopwith@redhat.com> 2.4.0.7-6
changelog:
  - Patches for #64902, #66486, #68483, #71308
  - post-install script changes from the gdm.spec mentioned in #70965
  - noreplace on gdm.conf for #71309


author: Havoc Pennington <hp@redhat.com>
changelog:
  - put in a patch from george to fix some setsid()/kill() confusion
    possibly fixing #72295
  - turn off UseCirclesInEntry for now, fixes #72433


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 2.4.0.7 with bugfixes George kindly did for me, 
    including mnemonics for the graphical greeter
  - use Wonderland gtk theme for the nongraphical greeter
  - remove patches that are now upstream


author: Havoc Pennington <hp@redhat.com>
changelog:
  - update rhconfig patch
  - use pam_timestamp for the config tool
  - link to a desktop file in redhat-menus
  - update .gnome2 patch, filed upstream bug
  - 2.4.0.4
  - rebuild with new gail, librsvg2


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Require redhat-artwork, make the default greeter theme Wonderland
  - Look for all configuration in .gnome2 not .gnome. This avoids problems 
    with changes in the set of session/lang.
  - Remove English from locale.alias, make most locales UTF-8
  - Call find_lang with the right name


author: Havoc Pennington <hp@redhat.com>
changelog:
  - rebuild for new libs
  - put gdm-autologin pam config file in file list, hope
    its absence wasn't deliberate
  - use desktop-file-install


author: Havoc Pennington <hp@redhat.com>
changelog:
  - clean up some format string mess, and don't
    log username to syslog, #5681
  - own some directories #50692


author: Havoc Pennington <hp@redhat.com>
changelog:
  - After, oh, 2 years or so, finally upgrade version and set
    release to 1. Remove all hacks and patches, pretty much;
    this will break a few things, will be putting them back 
    via GNOME CVS. All changes should go in 'gdm2' module in 
    CVS for now.

    This RPM enables all kinds of features that I'm going to turn
    off shortly, so don't get excited about them. ;-)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - reinitialize pam credentials after calling initgroups() -- the
    credentials may be group memberships


author: Havoc Pennington <hp@redhat.com>
changelog:
  - Apply security errata patch we released for 6.2
  - Add Gnome.session back, don't know when it disappeared or why


author: Havoc Pennington <hp@redhat.com>
changelog:
  - Modify Default.session and Failsafe.session not to add -login option to bash
  - exec the session scripts with the user's shell with a hyphen prepended
  - doesn't seem to actually work yet with tcsh, but it doesn't seem to 
    break anything. needs a look to see why it doesn't work


author: Havoc Pennington <hp@redhat.com>
changelog:
  - Try to fix bug 8877 by clearing the message below 
    the entry box when the prompt changes. may turn 
    out to be a bad idea.


author: Michael Fulbright <drmike@redhat.com>
changelog:
  - fix to handling ancient gdm config files with non-standard language specs
  - dont close display connection for xdmcp connections, else we die if remote
    end dies.


author: Jonathan Blandford <jrb@redhat.com>
changelog:
  - added patch from otaylor to not call gtk funcs from a signal.
  - added patch to tab when username not added.
  - added patch to center About box (and bring up only one) and ignore "~"
    and ".rpm" files.


author: Michael Fulbright <drmike@redhat.com>
changelog:
  - remove GNOME/KDE/AnotherLevel session scripts, these have been moved to
    the appropriate packages instead.
  - added patch to make option menus always active (security problem otherwise)
  - added jrb's patch to disable stars in passwd entry field


author: Michael Fulbright <drmike@redhat.com>
changelog:
  - added session files for GNOME/KDE/AnotherLevel/Default/Failsafe
  - patched gdmgreeter to not complete usernames
  - patched gdmgreeter to not safe selected session permanently
  - patched gdmgreeter to center dialog boxes


author: Owen Taylor <otaylor@redhat.com>
changelog:
  - Updated patches for 1.0.0
  - Fixed some problems in 1.0.0 with installation directories
  - moved /usr/var/gdm /var/gdm


author: Michal Hlavinka <mhlavink@redhat.com> 5.2.14-31
changelog:
  - use alternatives for ksh/pdksh selection
  - spec cleanup
  - initial package for RHEL-5
  - resolves: #469297


author: Karsten Hopp <karsten@redhat.de> 5.2.14-30.4
changelog:
  - RHBA-2006:0704
  - fix signal handling (#200879)
  - fix memory handling (#186422)
  - add fix for multiline prompts (#198734)


author: Alan Cox <alan@redhat.com>
changelog:
  - EASYFIX (#125678) - add/remove alias /usr/bin/ksh, pdksh names. Fix
    inadequate grep anchors on remove script. Fix wrong permissions if
    upgrading with umask 077.


author: Trond Eivind Glomsrod <teg@redhat.com>
changelog:
  - add patch from author to fix "-x" problem (#10758)
  - add another author patch (some fixes wrt. job handling)


author: Cole Robinson <crobinso@redhat.com> - 0.400.3-6.el5
changelog:
  - virt-convert: allow converting to qcow2 (bz 506927)
  - Don't fail if a storage volume was manually deleted (bz 511925)
  - virt-install: Fix --prompt and --disk interaction (bz 516129)
  - Fix virt-install --wait <= 0 (bz 512931, bz 517081)
  - Fix badly formatted error message (bz 523767)
  - Better post install error handling and reporting (bz 545837, bz 498237)
  - virt-image: Hide unimplemented --prompt option (bz 503721)
  - Default to cache=none for new qemu guests (bz 512072)


author: Cole Robinson <crobinso@redhat.com> - 0.400.3-5.el5
changelog:
  - Use ac97 as only sound model for qemu driver (bz 508747)
  - Don't throw errors with unicode using locales (bz 508784)


author: Cole Robinson <crobinso@redhat.com> - 0.400.3-2.el5
changelog:
  - Fix virt-install --disk device=floppy (bz 503053)
  - Fix virt-install --disk vol= and pool= (bz 503073)
  - Make sure detected OS is in our dictionary (bz 503092)
  - Fix PCI device assignment detach/reset calls (bz 499576)
  - Restore old --location behavior for xen HVM (bz 503473)


author: Cole Robinson <crobinso@redhat.com> - 0.300.2-12.el5
changelog:
  - Don't add spurious forward slashes in urls (bz 470891)
  - Fix FTP treeinfo false positives (bz 470888)
  - Revert fix for bz 446950, push to 5.4 (bz 470176)


author: Cole Robinson <crobinso@redhat.com> - 0.300.2-10.el5
changelog:
  - Add --wait option to virt-install (bz 306871)
  - Fix fetching newer suse kernels (bz 449129)
  - Parse treeinfo files for newer fedora trees (bz 460585)
  - Keep windows media inserted for second install stage (bz 447791)
  - Build fix so we don't fail if imports aren't present.


author: Cole Robinson <crobinso@redhat.com> - 0.300.2-9.el5
changelog:
  - Add win2008 and f9 as distro options (rhbz #442702)
  - Exit with proper error code if we receive wrong cli value (rhbz #444986)
  - Remove virt-viewer from Requires, so we don't require X (rhbz #448505)
  - Catch errors during domain lookup (rhbz #288391)
  - Correctly print help messages with unicode characters (rhbz #446950)
  - Allow installing from Scientific Linux trees (rhbz #448634)
  - Add --cpuset=auto command for numa allocation (rhbz #438554)


author: Cole Robinson <crobinso@redhat.com> - 0.300.2-6.el5
changelog:
  - Add --force option to cli utils to not prompt for input.
  - Remove check for file existence in cli utils, breaks scripts.
  - (rhbz #434786)


author: Hugh O. Brock <hbrock@redhat.com> - 0.103.0-3.el5
changelog:
  - Patch to have virtinst set up the guest without auto-reboot. Useful 
  - for testing. Thanks to Jeff Burke (bz #249708)


author: Jeremy Katz <katzj@redhat.com> - 0.99.0-1.el5
changelog:
  - support upstream pvfb config syntax (danpb, #219195)
  - don't traceback on invalid memory param (gcosta, #219270)
  - let the console come back quicker to help with HVM installs (#212024)


author: Jeremy Katz <katzj@redhat.com> - 0.96.0-1
changelog:
  - improve check for if a machine is hvm capable to catch when support isn't
    allowed by the bios (#211276)
  - cleanup after nfs mount failure on pv install (#206196)
  - support for setting vcpus (#210516)


author: Jeremy Katz <katzj@redhat.com> - 0.94.0-1
changelog:
  - Fix using block device as backing (#209138)
  - Fix error handling for invalid install locations (danpb)
  - Write out vcpu config (danpb)


author: Jeremy Katz <katzj@redhat.com> - 0.93.0-1
changelog:
  - Fix hvm network xm config (danpb)
  - Enable PAE with pae hvm hosts (danpb)
  - Fix hvm block backed cds (danpb)
  - Fix handling of block devs backed by vbds (danpb)
  - Ensure we're on a xen kernel (#205889)
  - Default to vncunused


author: Jeremy Katz <katzj@redhat.com> - 0.92.0-1
changelog:
  - Fix silly loop when asking about graphics support (misa)
  - Fix passing macaddr
  - Add support so that we reboot into the guest after installation finishes


author: Jeremy Katz <katzj@redhat.com> - 1.26-3
changelog:
  - allow building on all x86 arches
  - pass appropriate compiler options to build on x86_64 as well (#136939)


author: Mike A. Harris <mharris@redhat.com> 3.0-3
changelog:
  - Pedantic spec file cleanups - s/Copyright/License/ and use _libdir instead of
    /usr/lib everywhere (even though it's currently x86 only)


author: Michael Fulbright <msf@redhat.com>
changelog:
  - initial integration into distribution. Removed the scripts to install a
    entry in the boot loader for memtest for the moment, and relocated to under
    /usr/lib.


author: Matthew Miller <mattdm@bu.edu>
changelog:
  - v 2.8a
  - removed lilo-configuring scripts. need to figure out the best way to
    work with grub and RH 7.2 / BU Linux 2.5
  - group -> System Environment/Base


author: Matthew Miller <mattdm@bu.edu>
changelog:
  - changed so that lilo.conf isn't written if it already exists. This is
    important if you're including memtest86 in a distribution
  - GPG key available from http://www.bu.edu/dsgsupport/linux/BULinux-GPG-KEY  
  - changed name of lilo.conf backup file to something less likely to conflict
    with other backups


author: Matthew Miller <mattdm@bu.edu>
changelog:
  - Updated to version 2.2
  - Cosmetic changes to spec file
  - updated Source: to reflect actual author's url


author: Peter Vrabec <pvrabec@redhat.com> - 1.4.1-45
changelog:
  - include a newline when logging to tty
  - syslogd keeps writing messages to /dev/console after an EINTR in syscall
  - fixing memory leak 
  - man page fixes
    Resolves: #490897, #506683, #481600, #471174, #460232


author: Jason Vas Dias <jvdias@redhat.com> 1.4.1rh-33
changelog:
  - fix bug 166643: klogd needs to use internal syslog functions in syslog.c,
                    because only they allow logging with facility==kernel.
  		  Fix prototypes to allow use of internal syslog functions.


author: Jason Vas Dias <jvdias@redhat.com> 1.4.1rh-31
changelog:
  - fix bug 62679:  give initscript a reload option
  - fix bug 78371:  make syslogd's umask configurable in sysconfig/syslog
  		  with initscript SYSLOG_UMASK option


author: Jason Vas Dias <jvdias@redhat.com> 1.4.1rh-30
changelog:
  - fix bug 158205: fix MARK message generation
                    Patch contributed by Ray Van Tassle of Motorola


author: Jason Vas Dias <jvdias@redhat.com> 1.4.1rh-28
changelog:
  - Fix bug 152319: potential ctime() deadlock in domark() when called
  -                 from signal handler


author: Jason Vas Dias <jvdias@redhat.com> 1.4.1rh-25
changelog:
  - Fix bug 144084 - bad version of '@host' name checking code
  - used by mistake + memory corruption caused by free of
  - addrinfo node returned by getaddrinfo().


author: Jason Vas Dias <jvdias@redhat.com> 1.4.1rh-24
changelog:
  - Do not allow hostnames that resolve to the address of a local
  - interface to be used for forwarding, else syslogd gets into
  - an infinite loop sending messages to itself (as reported by
  - Chuck Mead <csm@redhat.com>).


author: Jason Vas Dias <jvdias@redhat.com> 1.4.1rh-23
changelog:
  - Allow SIGALRM to interrupt system calls, as syslogd expects.
  - In Fedora Core, signal(SIGALRM,...) uses SA_RESTART; one is
  - required to use siginterrupt() to get interruptable system calls.
  - (#140983)


author: Bill Nottingham <notting@redhat.com> 1.4.1rh-7
changelog:
  - don't *require* logrotate, but conflict with older versions
  - fix fd leak of System.map (#52901)
  - switch to -x for klogd by default; we have kksymoops
  - provide LSB facility


author: Bill Nottingham <notting@redhat.com>
changelog:
  - require a specific version of logrotate (#50794)
  - fix %preun for the case when it's not running (#50123)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - adapt /etc/sysconfig/syslog for specification of arbitrary options (#23171)
  - fix translation string slightly (#24088)


author: Bill Nottingham <notting@redhat.com>
changelog:
  - don't set owner/group on manpages on install
  - read /etc/sysconfig/syslog if present for some configuration paramters
  - fix build with new kernel headers


author: Bill Nottingham <notting@redhat.com>
changelog:
  - handle bad directories passed to '-a' without behaving strangely (#10363)
  - remove compatibility chkconfig links


author: Donnie Barnes <djb@redhat.com>
changelog:
  - added status|restart support to syslog.init
  - added chkconfig support
  - various spec file cleanups


author: Jon Masters <jcm@redhat.com> - 8.0.45-28
changelog:
  - Remove dependency on /lib/firmware in Driver Update packages. Those who
    need to ship firmware files should use an override filelist instead.
  - Resolves: #252188.


author: Jon Masters <jcm@redhat.com> - 8.0.45-26
changelog:
  - Fix kernel_module_package -v/-r macros.
  - Resolves: #252188.
  - Fix handling of zero sized JAR files.
  - Resolves: #269481.


author: Jon Masters <jcm@redhat.com> - 8.0.45-24
changelog:
  - Fix use of TMPDIR to JTMPDIR in order to avoid conflict with mktemp use.
  - Resolves: #244899.
  - Set PKG_CONFIG_PATH in %__pre_build.
  - Resolves: #251922.


author: Elliot Lee <sopwith@redhat.com> 8.0.33-1
changelog:
  - Change -D to -Wp,-D to make java happy
  - Add -D_FORTIFY_SOURCE=2 to global cflags (as per Jakub & Arjan's request)


author: Jens Petersen <petersen@redhat.com> - 8.0.26-1
changelog:
  - preserve the vendor field when VENDOR not set
  - put VENDOR in the final i386-libc line, not the tentative one


author: Jens Petersen <petersen@redhat.com> - 8.0.25-1
changelog:
  - update config.{guess,sub} to 2003-06-17
  - define VENDOR to be redhat only when /etc/redhat-release present
    [suggested by jbj]
  - put VENDOR in vendor field in our config.guess file for
    ia64, ppc, ppc64, s390, s390x, x86_64 and elf32-i386 Linux
  - drop the --host, --build, --target and --program-prefix configure options
    from %configure, since this causes far too many problems


author: Jens Petersen <petersen@redhat.com> - 8.0.22-2
changelog:
  - add config.guess and config.sub (2003-02-22) with s390 patch on config.sub
  - make %configure use them


author: Phil Knirsch <pknirsch@redhat.com> 8.0.3-2
changelog:
  - Added fix for outdated config.[sub|guess] files in 
    CFLAGS="${CFLAGS:--O2}" ; export CFLAGS ; 
    CXXFLAGS="${CXXFLAGS:--O2}" ; export CXXFLAGS ; 
    FFLAGS="${FFLAGS:--O2}" ; export FFLAGS ; 
    for i in $(find . -name config.guess -o -name config.sub) ; do 
             [ -f /usr/lib/rpm/redhat/$(basename $i) ] && /bin/rm -f $i && /bin/cp -fv /usr/lib/rpm/redhat/$(basename $i) $i ; 
    done ; 
    ./configure --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu \
  	--target=noarch-redhat-linux-gnu \
  	--program-prefix= \
  	--prefix=/usr \
  	--exec-prefix=/usr \
  	--bindir=/usr/bin \
  	--sbindir=/usr/sbin \
  	--sysconfdir=/etc \
  	--datadir=/usr/share \
  	--includedir=/usr/include \
  	--libdir=/usr/lib64 \
  	--libexecdir=/usr/libexec \
  	--localstatedir=/var \
  	--sharedstatedir=/usr/com \
  	--mandir=/usr/share/man \
  	--infodir=/usr/share/info section


author: Alexander Larsson <alexl@redhat.com> 8.0.1
changelog:
  - Add debug package support to 
      
      
      
      /usr/lib/rpm/redhat/brp-compress 
      /usr/lib/rpm/redhat/brp-strip /usr/bin/strip 
      /usr/lib/rpm/redhat/brp-strip-static-archive /usr/bin/strip 
      /usr/lib/rpm/redhat/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump 
      /usr/lib/rpm/brp-python-bytecompile 
      /usr/lib/rpm/redhat/brp-java-repack-jars


author: Jens Petersen <petersen@redhat.com> 7.3.92-4
changelog:
  - fix %configure targeting for autoconf-2.5x (#58468)
  - include ~/.rpmmacros in macrofiles file path again


author: Dan Walsh <dwalsh@redhat.com> - 1.30.12-1
changelog:
  - Latest update from NSA
  	* Merged user and range_transition support for modules from 
  	  Darrel Goeddel


author: Dan Walsh <dwalsh@redhat.com> - 1.30.11-1
changelog:
  - Latest update from NSA
  	* merged range_transition enhancements and user module format
  	  changes from Darrel Goeddel
  	* Merged symtab datum patch from Karl MacMillan.


author: Dan Walsh <dwalsh@redhat.com> - 1.30.8-1
changelog:
  - Latest upgrade from NSA
  	* Lindent.
  	* Merged patch to remove TE rule conflict checking from the parser
  	  from Joshua Brindle.  This can only be done properly by the 
  	  expander.
  	* Merged patch to make checkpolicy/checkmodule handling of
  	  duplicate/conflicting TE rules the same as the expander 
  	  from Joshua Brindle.
  	* Merged optionals in base take 2 patch set from Joshua Brindle.


author: Dan Walsh <dwalsh@redhat.com> - 1.30.5-1
changelog:
  - Latest upgrade from NSA
  	* Merged compiler cleanup patch from Karl MacMillan.
  	* Merged fix warnings patch from Karl MacMillan.


author: Dan Walsh <dwalsh@redhat.com> - 1.30.4-1
changelog:
  - Latest upgrade from NSA
  	* Changed require_class to reject permissions that have not been
  	  declared if building a base module.


author: Dan Walsh <dwalsh@redhat.com> - 1.30.3-1
changelog:
  - Latest upgrade from NSA
  	* Fixed checkmodule to call link_modules prior to expand_module
  	  to handle optionals.
  	* Fixed require_class to avoid shadowing permissions already defined
  	  in an inherited common definition.


author: Dan Walsh <dwalsh@redhat.com> - 1.30-1
changelog:
  - Latest upgrade from NSA
  	* Updated version for release.
  	* Fixed bug in role dominance (define_role_dom).


author: Dan Walsh <dwalsh@redhat.com> - 1.29.4-1
changelog:
  - Latest upgrade from NSA
  	* Added a check for failure to declare each sensitivity in
  	  a level definition.
  	* Changed to clone level data for aliased sensitivities to
  	  avoid double free upon sens_destroy.  Bug reported by Kevin
  	  Carr of Tresys Technology.


author: Dan Walsh <dwalsh@redhat.com> 1.27.19-1
changelog:
  - Latest upgrade from NSA
  	* Added error checking of all ebitmap_set_bit calls for out of
  	  memory conditions.
  	* Merged removal of compatibility handling of netlink classes
  	  (requirement that policies with newer versions include the
  	   netlink class definitions, remapping of fine-grained netlink
  	   classes in newer source policies to single netlink class when
  	   generating older policies) from George Coker.


author: Dan Walsh <dwalsh@redhat.com> 1.27.16-1
changelog:
  - Latest upgrade from NSA
  	* Removed obsolete cond_check_type_rules() function and call and 
  	  cond_optimize_lists() call from checkpolicy.c; these are handled
  	  during parsing and expansion now.
  	* Updated calls to expand_module for interface change.
  	* Changed checkmodule to verify that expand_module succeeds 
  	  when building base modules.
  	* Merged module compiler fixes from Joshua Brindle.
  	* Removed direct calls to hierarchy_check_constraints() and 
  	  check_assertions() from checkpolicy since they are now called 
  	  internally by expand_module().


author: Dan Walsh <dwalsh@redhat.com> 1.27.10-1
changelog:
  - Latest upgrade from NSA
  	* Updated for changes to sepol expand_module and link_modules interfaces.


author: Dan Walsh <dwalsh@redhat.com> 1.27.9-1
changelog:
  - Latest upgrade from NSA
  	* Merged support for require blocks inside conditionals from
  	Joshua Brindle (Tresys).


author: Dan Walsh <dwalsh@redhat.com> 1.27.5-1
changelog:
  - Latest upgrade from NSA
  	* Merged error handling improvement in checkmodule from Karl MacMillan (Tresys).


author: Dan Walsh <dwalsh@redhat.com> 1.27.4-1
changelog:
  - Latest upgrade from NSA
  	* Merged bugfix for dup role transition error messages from
  	Karl MacMillan (Tresys).


author: Dan Walsh <dwalsh@redhat.com> 1.25.12-1
changelog:
  - Update to NSA Release
  	* Fixed handling of validatetrans constraint expressions.
  	Bug reported by Dan Walsh for checkpolicy -M.


author: Dan Walsh <dwalsh@redhat.com> 1.25.11-1
changelog:
  - Update to NSA Release
  	* Merged use-after-free fix from Serge Hallyn (IBM).  
  	  Bug found by Coverity.


author: Dan Walsh <dwalsh@redhat.com> 1.25.10-1
changelog:
  - Update to NSA Release
  	* Fixed further memory leaks found by valgrind.
  	* Changed checkpolicy to destroy the policydbs prior to exit
  	  to allow leak detection.
  	* Fixed several memory leaks found by valgrind.


author: Dan Walsh <dwalsh@redhat.com> 1.25.8-1
changelog:
  - Update to NSA Release
  	* Updated checkpolicy and dispol for the new avtab format.
  	  Converted users of ebitmaps to new inline operators.
    	  Note:  The binary policy format version has been incremented to 
  	  version 20 as a result of these changes.  To build a policy
  	  for a kernel that does not yet include these changes, use
  	  the -c 19 option to checkpolicy.
  	* Merged patch to prohibit use of "self" as a type name from Jason Tang (Tresys).
  	* Merged patch to fix dismod compilation from Joshua Brindle (Tresys).


author: Dan Walsh <dwalsh@redhat.com> 1.25.5-1
changelog:
  - Update to NSA Release
  	* Fixed call to hierarchy checking code to pass the right policydb.
  	* Merged patch to update dismod for the relocation of the
  	  module read/write code from libsemanage to libsepol, and
  	  to enable build of test subdirectory from Jason Tang (Tresys).


author: Dan Walsh <dwalsh@redhat.com> 1.25.2-1
changelog:
  - Update to NSA Release
  	* Merged loadable module support from Tresys Technology.
  	* Merged patch to prohibit the use of * and ~ in type sets 
  	  (other than in neverallow statements) and in role sets
  	  from Joshua Brindle (Tresys).
  	* Updated version for release.


author: Dan Walsh <dwalsh@redhat.com> 1.23-3-1
changelog:
  - Update to NSA Release
  	* Added sepol_ prefix to Flask types to avoid namespace
  	  collision with libselinux.


author: Dan Walsh <dwalsh@redhat.com> 1.23,1-1
changelog:
  * Merged hierarchical type/role patch from Tresys Technology.
  	* Merged MLS fixes from Darrel Goeddel of TCS.


author: Dan Walsh <dwalsh@redhat.com> 1.21.4-1
changelog:
  * Merged define_user() cleanup patch from Darrel Goeddel (TCS).
  	* Moved genpolusers utility to libsepol.
  	* Merged range_transition support from Darrel Goeddel (TCS).


author: Dan Walsh <dwalsh@redhat.com> 1.19.2-1
changelog:
  - Latest from NSA
  	* Merged typeattribute statement patch from Darrel Goeddel of TCS.
  	* Changed genpolusers to handle multiple user config files.
  	* Merged nodecon ordering patch from Chad Hanson of TCS.


author: Mike A. Harris <mharris@redhat.com> 1:2.1.0-9
changelog:
  - I seem to have just unknowingly won the xsri package in a game of package
    roulette.  I pledge my allegiance to make it the best eye-candy app on the
    desktop for 2005.
  - Rebuilt with gcc 4 for FC4
  - Make rpm install section export RPM_OPT_FLAGS in CFLAGS


author: Tim Waugh <twaugh@redhat.com> 1.2.2-1
changelog:
  - s/Copyright/License/.
  - 1.2.2.
  - Apply multibyte patch so that DTD preparsing works with DocBook 4.0 up.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - don't try to touch the site-start.el file
  - use %{_tmppath}
  - don't %define %version above the "Version: " part
    of the header


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - PATH hack to protect "make install" from install-info
  - %doc path fixed
  - protect postun from uninstall
  - Moved $V outside of '' so that it gets interpolated


author: <than@redhat.com> 2.1.5-1
changelog:
  - 2.1.5 release
  - update c_cpp_reference
  - cleanup sepcfile
  - remove templates, which is now in new upstream
  - remove unneeded c_cpp_reference-2.0.1-config.patch
  - add missing mo files
  - fixed #75084, #73128, #70656, #77767, #74425


author: Than Ngo <than@redhat.com> 2.1.3-3
changelog:
  - Add fix to show/hide KaboutKDE and Report Bug menu item over
    KDE Action Restrictions in kdeglobals


author: Than Ngo <than@redhat.com> 2.1beta2-2
changelog:
  - fixed Strange characters appear in the output window (bug #59217)
  - fixed return-line feed sign in Kdevelop setup tool (bug #55032)


author: Than Ngo <than@redhat.com> 2.1beta1-1
changelog:
  - update to 2.1 beta1
  - fix build against gcc 3
  - fix some typo bugs
  - get rid of libkfile
  - update c_cpp_reference to 2.0.1


author: Than Ngo <than@redhat.com> 2.0-2
changelog:
  - fix a bug in creating documentation index when running KDevelop Setup (bug #52760)
  - backport some major bugfixes from 2.0.1


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update the C/C++ reference guide docs. The older version had a
    couple of examples that won't work with gcc 2.96-*


author: Than Ngo <than@redhat.com>
changelog:
  - update (only bugfixes)
  - fix up kdelibs documentation path
  - fix a dependency problem with kde-i18n package (Bug #27675)
  - add qt-designer into requires


author: Than Ngo <than@redhat.com>
changelog:
  - build snapshot 20001112, it works now with KDE2 and kde1-compat
  - fix libtool to build on sparc and alpha
  - don't use make -j


author: Than Ngo <than@redhat.de>
changelog:
  - add missing ldconfig in %post and %postun section (Bug #14924)
  - add missing C references stuff to kdevelop


author: Bernhard Rosenkränzer <bero@redhat.com>
changelog:
  - Fix up documentation path (Bug #7291)
  - Update to current stable branch - this should fix up the debugger problem
  - clean up spec file


author: Jarod Wilson <jarod@redhat.com> 1.2.1-9
changelog:
  - Start cpuspeed after syslog on boot so its messages are logged (#516244)
  - Don't load acpi-cpufreq by default on Intel 7100 series processors,
    due to a hardware bug that can lead to a lockup (#449004)
  - Minor initscript exit status fixups (#495049)


author: Jarod Wilson <jarod@redhat.com> 1.2.1-8
changelog:
  - Revert fixes for #488924, they unfortunately lead to cpuspeed
    never starting on boot on xen kernels, since cpuspeed starts
    before xend (#498406)


author: Jarod Wilson <jarod@redhat.com> 1.2.1-7
changelog:
  - Handle case under kernel-xen where xm is unavailable and/or
    we can't communicate with xend (additional fix for #488924)


author: Jarod Wilson <jarod@redhat.com> 1.2.1-6
changelog:
  - Don't try loading speedstep-centrino if acpi-cpufreq already
    successfully loaded, it causes p-state issues (#485480)
  - If we're running on a Xen kernel and the number of virtual cpus
    doesn't match the number of physical cpus, we could end up
    scaling the wrong physical cpu due to migration, so in the
    vcpus != pcpus case, don't do freq scaling (#488924)


author: Jarod Wilson <jarod@redhat.com> 1.2.1-5
changelog:
  - Support for speedstep-centrino module fallback if
    new-and-improved acpi-cpufreq doesn't work (#463488)


author: Jarod Wilson <jwilson@redhat.com> 1.2.1-3
changelog:
  - Disable freq scaling by default on AMD rev F and earlier
    cpus when running xen, due to clock instability (#435321)


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Fix up exit codes for LSB compliance (#237940)
  - Try loading acpi-cpufreq even on systems that don't
    report enhanced speedstep support (#216702)
  - Indentation and variable usage cleanup


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Fix error-suppression for systems that report support
    for est, but have it disabled in the bios (#220200)


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Fix up documentation in config file (#219926)
  - Fall back cleanly to userspace governor on
    non-centrino/powernow-k8/p4-clockmod systems
  - Update description to reflect support for
    kernel-space freq scaling


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Turn on ia64 builds (#216702)
  - Fix status on xen kernels
  - Move config file to /etc/sysconfig/cpuspeed, more
    appropriate for initscript configs (#152305)
  - Manify 'cpuspeed --help' along with other details (#172655)
  - Tweak cpuspeed default thresholds (#147565)
  - Let non-centrino/powernow-k8 systems also use other
    validated governors (#219926)
  - Fix cpuspeed daemon options settings (#221829)
  - Fix status and condrestart for centrino/powernow-k8 (#219926)
  - Give feedback when loading/unloading a cpufreq governor
  - Rework config file and initscript to make it much easier
    for end-users to adjust frequency scaling setup (#151761)
  - Log start/stop events with useful info
  - Don't start on xen kernels (freq scaling not supported)
  - Set lock file for centrino/powernow-k8 so status 
    indicates we do have scaling working 
  - Fix up centrino/powernow-k8 stop function (#213999)


author: Jarod Wilson <jwilson@redhat.com>
changelog:
  - Spec tweaks to bring in line with Fedora packaging guidelines
  - Add docs to package
  - Mark config file as noreplace
  - Be sure to stop service before uninstall


author: Dave Jones <davej@redhat.com>
changelog:
  - Merge patch from Michal Jaegermann <michal@harddata.com>
    that solves the acpi-cpufreq problem in an improved
    way and fixes several other nits.


author: Dave Jones <davej@redhat.com>
changelog:
  - Only load acpi-cpufreq on speedstep capable machines.
  - Unload acpi-cpufreq if BIOS tables didn't exist or
    other acpi-cpufreq failures occured.


author: Dave Jones <davej@redhat.com>
changelog:
  - Remove a bunch of no-longer needed gunk from the initscript.
  - Use on-demand governor on centrino/core based systems for now,
    as it seems to have a better effect.


author: Martin Stransky <stransky@redhat.com> 1.1.2-3
changelog:
  - Removed event patch, it blocks X events and breaks Adobe pdf plugin
  - Removed event limit in xt_event_polling_timer_callback


author: Martin Stransky <stransky@redhat.com> 1.1.2-1
changelog:
  - updated to 1.1.12
  - added librhythmbox* to ignored plugins (#467187)
  - removed debug prints (#467090)


author: Warren Togami <wtogami@redhat.com> 1.1.0-10
changelog:
  - Revert libcurl requires because it was done in an incorrect way
  - Revert patch from -7 because it made things worse


author: Martin Stransky <stransky@redhat.com> 0.9.91.5-23
changelog:
  - merged exclude patch with main tarball
  - fixed #431095 - Typo in mozilla-plugin-config verbose output


author: Martin Stransky <stransky@redhat.com> 0.9.91.4-15
changelog:
  - removed mozembeded dependency
  - excluded totem plugins from wrapping
  - xpcom support is optional now


author: Martin Stransky <stransky@redhat.com> 0.9.91.4-3
changelog:
  - updated nspluginsetup script and package install/uninstall scripts
  - added cross-compilation support
  - removed binaries stripping


author: Ivana Varekova <varekova@redhat.com> - 6.3.2-44
changelog:
  - Resolves: #291531
    fix log file permission
  - Resolves: #232163
    service psacct status returns the right value
  - Resolves: #447028
    Logrotate of psacct will restart accounting even if 
    the service was stopped


author: Charles Bennett <ccb@redhat.com> 6.3.2-33.fc4
changelog:
  - rhbz 133077: logrotate fixed to continue accounting during rotate
  - rhbz 141802: lastcomm was not handling all forms of --strict-match
  - rhbz 141971: rpm -e no longer leaves /var/lock/subsys/psacct
  - rhbz 43294: sa will never report any io because the kernel doesn't
     provide it.  Tweaked to ignore ac_io in acct.h
  - integrate lastcomm hz patch from RH support


author: Mike A. Harris <mharris@redhat.com> 6.3.2-25
changelog:
  - Added with_last conditional to disable /usr/bin/last because ours is in
    the SysVInit package.  This fixes unpackaged files terminate build prob.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-24
changelog:
  - Fixed initscript reload/restart by creating start/stop functions and
    making everything use them (#72261)


author: Mike A. Harris <mharris@redhat.com> 6.3.2-23
changelog:
  - Fixed chkconfig issue in rpm scripts (#61191)
  - Excludearch ia64, not taking the time to debug/troubleshoot random
    buildsystem failure due to higher priorities.


author: Elliot Lee <sopwith@redhat.com>
changelog:
  - Take the time to make sure things get through on all archs, by simply
    running it through the build system.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-19
changelog:
  - Made initscript touch/chmod accounting file if it is not present during
    startup, to ensure accounting works properly when enabled.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-17
changelog:
  - Removed the files usracct and savacct, which are not used by psacct
    utilities at all, but by the sa program.  Our sa uses files in a different
    location, and so these files are unused and unnecessary.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-15
changelog:
  - Added new feature - psacct initscript now controls process accounting so
    that it is not just forced on if installed as was the previous behaviour
  - Modified the initscripts package to not force psacct on anymore and made
    the new psacct-6.3.2-15 conflict with previous initscripts packages.
  - Fixed logrotate config to set perms/owner of new log files, and closed
    bug (#54165)


author: Mike A. Harris <mharris@redhat.com> 6.3.2-13
changelog:
  - Removed Build_7x flag, added FHS_compliant flag, reworked specfile to use new
    flag, and fixed bug (#60716)


author: Mike A. Harris <mharris@redhat.com> 6.3.2-11
changelog:
  - Conditionalized acct-6.3.2-config.patch to only be applied for RHL 7.x
    builds, as it breaks FHS compliance by putting files in nonstandard
    locations.  Also fixed up other places in specfile for FHS 2.2.
  - Added acct-6.3.2-I-HATE-GNU-AUTOCONK.patch because I hate GNU autoconk
    really really badly.
    
  - Bumped to -11 to avoid buildsystem stupidness


author: Mike A. Harris <mharris@redhat.com> 6.3.2-9
changelog:
  - Fixed bug (#53307) psacct is enabled by default, and the log files
    are huge, and will fill the disk up very quickly.  logrotate will
    now compress them daily.


author: Mike A. Harris <mharris@redhat.com> 6.3.2-7
changelog:
  - Change spec tag Copyright -> License
  - change logrotate to rotate daily, and keep 1 month (31 days) of data


author: Jesse Keating <jkeating@redhat.com> - 0:0.0.8-8
changelog:
  - rebuild
  - Add patch to not include linux/compiler.h
  - Remove br on glibc-kernheaders, part of the build-env.


author: Jay Fenlason <fenlason@redhat.com> 0.0.8-5
changelog:
  - add -man patch to correct the names of the default tables.
    bz#123089 aptables man pages is not correct: built in chain name are wrong.


author: Jay Fenlason <fenlason@redhat.com> 0.0.8-2
changelog:
  - backport latest version from 3E branch.
  - Add 2.6-kernel patch, since glibc_kernheaders has incorrect
    arptables headers for the 2.6 kernel.


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 2.0.0
  - add a bunch of build requires
  - put omf in file list
  - fix location of desktop file
  - use desktop-file-install


author: Mike A. Harris <mharris@redhat.com> 1.0.0.4-1
changelog:
  - Updated xorg-x11-drv-i740 to version 1.0.0.4 from X11R7 RC4
  - Removed 'x' suffix from manpage dirs to match RC4 upstream.


author: Mike A. Harris <mharris@redhat.com> 1.0.0-0
changelog:
  - Initial spec file for i740 video driver generated automatically
    by my xorg-driverspecgen script.


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-15
changelog:
  - update backport for selecting which key to use for validation so that it
    prefers services with the local host name as the instance, from HEAD (more
    of #450776)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-14
changelog:
  - backport the "multiple_ccaches" option from HEAD, requiring that it
    be enabled to not immediately remove an old ccache when asked to create
    a new one (#463417)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-13
changelog:
  - add patch to add the "chpw_prompt" option, to allow the older behavior
    of attempting a password-change during authentication if libkrb5 detects
    an expired password, based on patch from Olivier Fourdan (#509092)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-12
changelog:
  - don't vary the password prompt depending on whether or not the user exists
    or is known to the KDC (CVE-2009-1384, #505265)
  - prefer using the "host" service when verifying that a TGT isn't forged,
    from HEAD (#450776)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-11
changelog:
  - don't enforce minimum_uid when no_user_check is also used, from
    HEAD (#490404)
  - don't try to get password-changing creds with all of the flags set
    that we'd request for a TGT (#489015)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-10
changelog:
  - add workaround for libpam returning success from pam_get_user() when it
    returns a NULL user name (#467208)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-9
changelog:
  - add backported fix for ccache permissions bypass when the "existing_ticket"
    option is used (CVE-2008-3825, #462113)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-8
changelog:
  - fix a packaging error: we were including the unpatched version of README
    after it had been patched


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - backport change to link directly with libpam.so to keep applications which
    dlopen libpam from failing to load pam_krb5.so (#460998)


author: Nalin Dahyabhai <nalin@redhat.com> 2.2.14-7
changelog:
  - backport the "null_afs"/"nullafs" option from 2.3.0, based on Jan Iven's
    patch, which instructs pam_krb5 to guess "afs@REALM" before "afs/cell@REALM"
    when forced to guess the principal name of a given cell (#249558)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - backport change to use LOG_AUTHPRIV instead of the default facility when
    logging messages (#354291)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.14-6
changelog:
  - when erroneously called with "use_first_pass" and no previously-supplied
    password, ensure that we make at least one attempt to authenticate to the
    KDC so that we can at least tell the difference between an unknown user
    and other types of errors (more of #400611)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.14-5
changelog:
  - backport fixes from 2.2.15 to return user-unknown instead of auth-error
    when the client in a password change doesn't match a known client principal,
    and to avoid prompting for a new password unless we've previously gotten
    password-changing creds (#402721)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.14-4
changelog:
  - skip second and third auth attempts whenever we already know that the
    client is unknown to the KDC (#400611)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.14-3
changelog:
  - disable libkrb5's prompt-for-password-change-when-getting-initial-creds
    behavior, if it provides a function to let us do that (#402721)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.10-0.1
changelog:
  - revert previous changes to how prompting works, and add a
    no_subsequent_prompt option to suppress libkrb5-based prompts during
    authentication, providing the PAM_AUTHTOK for all questions which
    libkrb5 asks


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.10-0
changelog:
  - rework prompting so that we stop getting stray prompts every now and then,
    and so that use_first_pass will *never* prompt for any information


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.9-1
changelog:
  - return PAM_IGNORE instead of PAM_SERVICE_ERR when we're called in
    an unsafe situation and told to refresh credentials (#197428)
  - drop from setuid to "normal" before calling our storetmp helper, so that
    it doesn't freak out except when *it* is setuid (#190159)
  - fix handling of "external" cases where the forwarded creds don't belong to
    the principal name we guessed for the user (#182239,#197660)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.8-1
changelog:
  - don't try to validate creds in a password-changing situation, because the
    attempt will always fail unless the matching key is in the keytab, which
    should never be the case for the password-changing service (#187303, rbasch)
  - if v4 has been disabled completely, go ahead and try to set 2b tokens
    because we're going to end up having to do that anyway (#182378)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.7-1
changelog:
  - add v4 credential conversion for "use_shmem" and "external" cases (though
    it should be redundant with "use_shmem") (#182239)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.6-1
changelog:
  - add a "krb4_use_as_req" option so that obtaining v4 creds kinit-style can
    be disabled completely (Hugo Meiland)


author: Nalin Dahyabhai <nalin@redhat.com> - 2.2.5-1
changelog:
  - don't log debug messages that we're skipping session setup/teardown unless
    debugging is enabled (#179037)
  - try to build the module with -Bsymbolic if we can figure out how to do that


author: Nalin Dahyabhai <nalin@redhat.com> 1.57-1
changelog:
  - force -fPIC
  - add --with-moduledir, --with-krb5-libs, --with-krbafs-libs to configure
  - add per-user stashes and return values


author: Nalin Dahyabhai <nalin@redhat.com> 1.49-1
changelog:
  - set PAM_USER using the user's parsed name, converted back to a local name
  - add account management service (checks for key expiration and krb5_kuserok())
  - handle account expiration errors


author: Nalin Dahyabhai <nalin@redhat.com> 1.46-1
changelog:
  - link with libresolv to get res_search, tip from Justin McNutt, who
    built it statically
  - explicitly link with libdes425
  - handle cases where getpwnam_r fails but still sets the result pointer
  - if use_authtok is given and there is no authtok, error out


author: Nalin Dahyabhai <nalin@redhat.com> 1.43-1
changelog:
  - add minimum UID support (#52358)
  - don't link pam_krb5 with libkrbafs
  - make all options in krb5.conf available as PAM config arguments


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - note that we had to prepend the current directory to a given path in
    dlopen.c when we had to (noted by Onime Clement)


author: Nalin Dahyabhai <nalin@redhat.com> 1.42-1
changelog:
  - return PAM_NEW_AUTHTOK_REQD when attempts to get initial credentials
    fail with KRB5KDC_ERR_KEY_EXP (noted by Onime Clement)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add info about accessing the CVS repository to the README
  - parser cleanups (thanks to Dane Skow for a more complicated sample)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - don't set forwardable and assorted other flags when getting password-
    changing service ticket (noted, and fix supplied, by Onime Clement)
  - try __posix_getpwnam_r on Solaris before we try getpwnam_r, which may
    or may not be expecting the same number/type of arguments (noted by
    Onime Clement)
  - use krb5_aname_to_localname to convert the principal to a login name
    and set PAM_USER to the result when authenticating
  - some autoconf fixes for failure cases


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - don't call initialize_krb5_error_table() or initialize_ovk_error_table()
    if they're not found at compile-time (reported for RHL 6.x by Chris Riley)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - note that [pam] is still checked in addition to [appdefaults]
  - note that AFS and Kerberos IV support requires working Kerberos IV
    configuration files (i.e., kinit -4 needs to work) (doc changes
    suggested by Martin Schulz)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add max_timeout, timeout_shift, initial_timeout, and addressless options
    (patches from Simon Wilkinson)
  - fix the README to document the [appdefaults] section instead of [pam]
  - change example host and cell names in the README to use example domains


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - don't delete tokens unless we're also removing ticket files (report and
    patch from Sean Dilda)
  - report initialization errors better


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - treat semicolons as a comment character, like hash marks (bug reported by
    Greg Francis at Gonzaga University)
  - use the [:blank:] equivalence class to simplify the configuration file parser
  - don't mess with the real environment
  - implement mostly-complete aging support


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - don't fail to fixup the krb5 ccache if something goes wrong obtaining
    v4 credentials or creating a krb4 ticket file (#33262)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fixup the man page
  - log return code from k_setpag() when debugging
  - create credentials and get tokens when setcred is called for REINITIALIZE


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - don't twiddle ownerships until after we get AFS tokens
  - use the current time instead of the issue time when storing v4 creds, since
    we don't know the issuing host's byte order
  - depend on a PAM development header again instead of pam-devel


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add a separate config file parser for compatibility with settings that
    predate the appdefault API
  - use a version script under Linux to avoid polluting the global namespace
  - don't have a default for afs_cells
  - need to close the file when we succeed in fixing permissions (noted by
    jlkatz@eos.ncsu.edu)


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - use the appdefault API to read krb5.conf if available
  - create v4 tickets in such a way as to allow 1.2.2 to not think there's
    something fishy going on


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - only try to delete ccache files once
  - ignore extra data in v4 TGTs, but log that we got some
  - require "validate" to be true to try validating, and fail if validation fails


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - fix prompting when the module's first in the stack and the user does not have
    a corresponding principal in the local realm
  - properly implement TGT validation
  - change a few non-error status messages into debugging messages
  - sync the README and the various man pages up


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add Seth Vidal's no_user_check flag
  - document no_user_check and skip_first_pass options in the man pages
  - rebuild against Kerberos 5 1.2 (release 15)


author: Richard Hughes <rhughes@redhat.com> - 2.16.0-10.el5
changelog:
  - Don't poke the screensaver when we get a button press else we can
    trigger the LCD panel to wakeup when the lid is closed on some laptops.
  - Resolves: #423931


author: Richard Hughes <rhughes@redhat.com> - 2.16.0-8.el5
changelog:
  - Add patches 6..17 from upstream to fix various bugs and crashers.
    None of these patches are risky, and pose little risk for a large gain in
    stability.
  - Resolves: #244982


author: Ray Strode <rstrode@redhat.com> - 2.14.0-2
changelog:
  - use blank screensaver when lid is closed instead of
    of turning off screensaver completly (bug 186849).


author: Ondrej Vasik <ovasik@redhat.com> 0.11.1-6.1
changelog:
  - fix #235411 - CVE-2007-2027 - elinks tries to load .po files
    from non-absolute path
  - fix #523258 - CVE-2008-7224 - entity_cache static array buffer
    overflow


author: Karel Zak <kzak@redhat.com> 0.11.0-1
changelog:
  - update to new upstream version
  - fix 0.11.0 build system (srcdir.patch)
  - regenerate patches:
       elinks-0.11.0-getaddrinfo.patch, 
       elinks-0.11.0-ssl-noegd.patch,
       elinks-0.11.0-sysname.patch,
       elinks-0.11.0-union.patch


author: Miloslav Trmac <mitr@redhat.com> - 0.10.3-2
changelog:
  - Fix checking for numeric command prefix (#152953, patch by Jonas Fonseca)
  - Fix invalid C causing assertion errors on ppc and ia64 (#156647)


author: Tim Waugh <twaugh@redhat.com> 0.4.2-6
changelog:
  - Make getaddrinfo call use AI_ADDRCONFIG.
  - Don't put so much information in the user-agent header string (bug #97273).


author: Jakub Jelinek <jakub@redhat.com> 0.3.2-1
changelog:
  - update to 0.3.2 to fix the DNS Ctrl-C segfaults
  - update URLs, the project moved
  - include man page


author: Jason Vas Dias <jvdias@redhat.com> - 3.1.8-81
changelog:
  - rebuild for new gcc, glibc, glibc-kernheaders
  - workaround new refusal of /usr/bin/install to chown


author: Jason Vas Dias <jvdias@redhat.com> 3.1.8-78
changelog:
  - fix bug 159220: add pam_loginuid to pam session stack in /etc/pam.d/atd 
  - fix bug 102341: add '-r' synonym for '-d' / atrm for POSIX / SuS conformance


author: Jason Vas Dias <jvdias@redhat.com> 3.1.8-68
changelog:
  - Put PAM authentication check in 'check_permissions()', so
  - user can know when using at(1) if PAM permission is denied.


author: Jason Vas Dias <jvdias@redhat.com> 3.1.8-60
changelog:
  - fix bug 131510: no_export env. var. blacklisting should not
  - remove 'SHELL' when only 'SHELLOPTS' is blacklisted.
  - at(1) man-page should not say 'commands are run with /bin/sh'
  - and should explain usage of SHELL environement variable and
  - details of blacklisted variables.


author: Jason Vas Dias <jvdias@redhat.com>
changelog:
  - Had to disable the 'make test' for the build BEFORE
  - any changes were made (building on FC2 - perl issue?)
  - test.pl generates these 'errors' for what looks like
  - valid output to me:
  -   $ ./test.pl 2>&1 | egrep -v '(^ok$)|(time_only)'
  -   1..3656
  -   not ok
  -   'Monday - 1 month': 'Fri Jul  2 18:29:00 2004' =? 'Sat Jul  3 18:29:00 2004'
  -   not ok
  -   'Monday - 10 months': 'Thu Oct  2 18:29:00 2003' =? 'Fri Oct  3 18:29:00 2003'
  -   not ok
  -   'next week - 1 month': 'Mon Jul  5 18:29:00 2004' =? 'Tue Jul  6 18:29:00 2004'
  -   not ok
  -   'next week - 10 months': 'Sun Oct  5 18:29:00 2003' =? 'Mon Oct  6 18:29:00 2003'
  - will investigate and fix for next release.


author: Jens Petersen <petersen@redhat.com> - 3.1.8-49
changelog:
  - replace at-3.1.8-SHELL-91233.patch by at-3.1.8-SHELL-111386.patch which
    now executes $SHELL directly in the at shell script after all the variables
    have been setup with /bin/sh (#91233) [suggested by Göran Uddeborg]
  - this changelog is now in utf-8


author: Dan Walsh <dwalsh@redhat.com> - 3.1.8-47.sel
changelog:
  * Fri Jun 20 2003 Jens Petersen <petersen@redhat.com> - 3.1.8-46
  - add at-3.1.8-atrun.8-typo-97697.patch to fix typo in atrun.8 (#97697)
  - update at.1 description of shell behaviour (#91233)


author: Jens Petersen <petersen@redhat.com> - 3.1.8-41
changelog:
  - update source to at_3.1.8-11 from debian upstream
    - update source url
    - at-debian.patch no longer needed
    - at-3.1.7-paths.patch: the patch to "at.1.in" no longer needed
    - replace at-3.1.8-lexer.patch with at-3.1.8-11-lexer-parser.diff
    - at-3.1.8-dst.patch no longer needed
    - at-3.1.8-lsbdoc.patch no longer needed
    - at-3.1.8-o_excl.patch no longer needed
    - bump release number
  - at-3.1.8-test.patch: move out test.pl to a separate source file
    - apply at-3.1.8-test-fix.patch to it and drop patch
  - at-3.1.8-shell.patch: drop (#22216,#91233)
  - run "make test" after building
  - add "--without check" rpmbuild option
  - fix autoconf comment to point to right patch
  - use _sysconfdir, _sbindir, _bindir, and _localstatedir


author: Bill Huang <bhuang@redhat.com>
changelog:
  - Fixed delaying job execution and missing starting jobs..(bug#69595)
    (Thanks Bujor D Silaghi <bujor@cs.umd.edu> for his patch.)


author: Bill Huang <bhuang@redhat.com>
changelog:
  - Fixed cleaning atq and  multiple atd daemon.(bug#67414)
    (Thanks Bujor D Silaghi <bujor@cs.umd.edu> for his patch.)


author: Adrian Havill <havill@redhat.com> 3.1.8-21
changelog:
  - fix man page (#51253)
  - fix env prop problem (#49491)
  - .SEQ should not be executable (#52626)
  - beefed up file creation perms against symlink exploits (O_EXCL)


author: Crutcher Dunnavant <crutcher@redhat.com>
changelog:
  - applied enrico.scholz@informatik.tu-chemnitz.de's change to the env patch to 
  - address bug #46546


author: Crutcher Dunnavant <crutcher@redhat.com>
changelog:
  - changed atd.init to start at 95, stop at 5, closing #15915
  - applied mailto:wp@supermedia.pl's environment patch


author: Crutcher Dunnavant <crutcher@redhat.com>
changelog:
  - much love to David Kilzer <ddkilzer@lubricants-oil.com>
  - who nailed UTC, Leap year, DST, and some other edge cases down
  - he also wrote a test harness in perl
  - bug #28448


author: Crutcher Dunnavant <crutcher@redhat.com>
changelog:
  - Well, we will likely never really close the UTC issues,
  - because of 1) fractional timezones, and 2) daylight savigns time.
  - but there is a slight tweak to the handling of dst in the UTC patch.


author: Preston Brown <pbrown@redhat.com>
changelog:
  - move init script
  - add condrestart directive
  - fix post/preun/postun scripts
  - prereq initscripts >= 5.20


author: Michael K. Johnson <johnsonm@redhat.com>
changelog:
  - updated to at version 3.1.7
  - updated lock and sequence file handling with %ghost
  - Use chkconfig and atd, now conflicts with old crontabs packages


author: David Woodhouse <dwmw2@redhat.com> - 1.32-1
changelog:
  - update to bluez-hcidump 1.32
  - Fix BNEP IPv6 parsing (#196879)
  - Support IPv6 in -n and -s options (#196878)


author: Trond Eivind Glomsrød <teg@redhat.com> 0.4-1
changelog:
  - s/Copyright/License/
  - Minor description change
  - fix use of %doc
  - Add full location of source tarball


author: Ned T. Crigler <crigler@hell-city.org> 0.4
changelog:
  - Portability updates thanks to sourceforge's compile farm. dtach should now
    work on: FreeBSD, Debian/alpha, Debian/PPC, Debian/sparc, Debian/PPC, and
    Solaris.


author: Ned T. Crigler <crigler@hell-city.org> 0.3
changelog:
  - Use getrlimit and dynamically allocate the data structures, if possible.
  - Added some more autoconf checks.
  - Initial sourceforge release.


author: Ned T. Crigler <crigler@hell-city.org>
changelog:
  - Changed the master to send a stream of text to attaching clients instead
    of sending a huge packet all the time.
  - Decreased the client <-> master packet size.
  - Changed the attach code so that it tells the master when a suspend occurs.


author: Ned T. Crigler <crigler@hell-city.org> 0.2
changelog:
  - Removed silly thinko regarding terminal settings in attach, we
    always set the terminal to raw mode now.
  - Moved redraw code into the master, which tries to be smarter when
    using ^L.
  - Moved the code that obtains the current terminal settings into main,
    preventing a race condition between the master and attach processes.
  - Rewrote argument parsing code.
  - Changed name to dtach.
  - Added a man page.


author: Isaiah Weiner <iweiner@redhat.com>
changelog:
  - Modified spec file to correct detach binary permissions
  - Modified spec file to correct detach documentation path
  - Modified spec file URL: to point to http://people.redhat.com/iweiner/detach
  - Modified spec file %clean to remove buildroot and builddir.


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-35
changelog:
  - allow mc to enter directories containing '_' (#236550)
  - search in viewer remembers its last search string (#238417)
  Resolves: #236550, #238417


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-33
changelog:
  - attempt to fcntl() descriptors appropriatelly so that subshell
    doesn't leave them open while execve()ing commands (#217027)


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-32
changelog:
  - fix ftpfs which didn't work with IPv6 patch (#217510)
  - don't crash when there is no more space in /tmp (#217159)
  - sh vfs won't disconnect when there is a special character
    in the name (#217507)


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-27.fc6
changelog:
  - display hex values correctly even for non-UTF8 locales, thanks
    to Egmont Koblinger
  - fix BuildRoot


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-24.fc6
changelog:
  - fix segfault caused by improper parsing of ls output while
    deleting files via shell link (#202623)


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-23.fc6
changelog:
  - update to new mc CVS snapshot
  - drop .case, .rpmobsolete patches - applied upstream
  - allow exit command even on non-local filesystems (#202440)
  - use %{?dist}


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-22
changelog:
  - use less ugly UTF-8 special characters for scrollbars
  - properly highlight RPM tags that differ in case while
    editing spec file


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-21
changelog:
  - update to new mc snapshot (fixes #195810)
  - drop .segfault patch, applied upstream
  - highlight "Serial:" and "Copyright:" obsolete RPM tags so that
    everyone is aware it's obsolete


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-18
changelog:
  - apply 00-74, 00-78 patches from Egmont Koblinger with
    UTF-8 fixes related to filename truncation and file search


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-17
changelog:
  - apply UTF-8 fixes from Vladimir Nadvornik
  - move the free space widget to the bottom of the main panel
    and don't use highlighting


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-16
changelog:
  - fix the free space widget patch: stat()s filesystem less
    frequently, display correct info in all circumstances


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-13
changelog:
  - comment fallback to use only dd in FISH upload patch
  - drop .promptfix patch so that prompt is displayed only
    once while in panels


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-9
changelog:
  - fix hotkey conflict in Layout options (#183282)
  - move syntax configuration file from /usr/share/mc to /etc/mc
  - save layout settings pernamently for showing free space, not
    only for current session (#182127)
  - fix audio bindings, make firefox default html binding


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-8
changelog:
  - make mc FHS compliant: store config files in /etc/mc and
    extfs/*.ini files in /etc/mc/extfs instead of /usr/share/mc
    (#2188) - the oldest open Red Hat bug is now gone ;)
  - fix warnings


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-7
changelog:
  - update from CVS - fixes syntax file for PHP
  - make displaying of free space configurable
  - fix permission highlighting (#177100)
  - redirect stdout and stderr of several apps run on background
    to /dev/null to not to mess up mc interface (#178833)
  - refresh directories to avoid errors caused by copying
    files to non-existent directories (#177111)
  - add an option to insert changelog entry in mcedit,
    thanks to Radek Vokal


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-6
changelog:
  - display free space on a device assigned to current directory in
    main panels
  - correctly diplay characters in mcview for non-UTF-8 LANG set (#174007)
    thanks to Dmitry Butskoy


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-5
changelog:
  - correctly concatenate directory and file in concat_dir_and_file()
  - highlight PHP files correctly (#174802)
  - use evince instead of gv to view ps files
  - align mini status bar with main panels


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-4
changelog:
  - don't segfault when LANG is not set, thanks to Andy Shevchenko (#174070)
  - drop specsyntax patch, applied upstream
  - sync NVRE with Fedoras
  - depend on external slang [now updated to 2.0.5] (#174662)


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.23
changelog:
  - update from CVS to fix the usage of glibc private symbols
  - don't try to display UTF8ized characters in hex viewing mode
    and display the characters correctly (#173309)


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.22
changelog:
  - update from upstream CVS for the new slang support
  - use internal slang-2.0.5 in mc for now
  - temporarily drop slang-devel dependency
  - don't use gpm to avoid hangs caused by it (#168076, #172921),
    console mouse support works even without gpm
  - display scrollbars correctly even if UTF-8 locale isn't set (#173014)
  - add slang2 support to utf8 patch (Leonard den Ottolander)
  - update %description


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.21
changelog:
  - add vertical scrollbars to main panels and listboxes
  - fix memleak in menu.c caused by UTF-8 patch
  - display UTF-8 characters corectly in mcview (#172571)
  - fix extensions patch


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.19
changelog:
  - update from CVS
  - convert spec to UTF-8
  - sync utf8, promptfix, 64bit patches
  - drop upstreamed gcc4, ftpcrash, find, symcrash, cstrans, searchfix patches
  - drop ctrl-t patch
  - update userhost patch to let the edited/viewed file name be displayed in
    xterm title


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.18
changelog:
  - fix off-by-one highlighting when searching backwards in mcedit (#169823)
  - fix yet another duplicates in menus for Czech locale


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.17
changelog:
  - fix duplicated keyboard shortcuts in menus for Czech locale (#169734)
  - fix ctrl-t page code recoding for Russian locale, thanks to
    Andy Shevchenko (#163594)


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.16
changelog:
  - fix memory leak in mc-utf8 patch, thanks to Marcin Garski (#169549)
  - fix mc-find patch to support UTF-8, thanks to Victor Abramoff (#169531)
  - remove bogus condition from mc-symcrash patch


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.15
changelog:
  - fix segfault when copying symlinks of a particular type and
    fix creation of dangled symlinks (#168184)


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.14
changelog:
  - backport the new Find dialog from upstream (#167493)
  - disable Xorg usage and drop the dependency
  - enable samba vfs
  - highlight "%check" in spec files (Mike A. Harris)


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.13
changelog:
  - don't hang when ftpfs connection times out - Hans de Goede (#166976)
  - fix extension file to better fit FC (xpdf->evince, lynx->links)


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.10
changelog:
  - update from CVS
  - sync with .utf8 patch and some minor gcc4 fixups
  - add .fixes patch
  - drop upstreamed .spaceprompt patch
  - update .userhost, .64bit patch
  - add mcview


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.9
changelog:
  - update from CVS
  - sync with .utf8 patch
  - fix broken charset conversion feature in the .utf8 patch, 
    Andrew V. Samoilov (#154516)


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.6
changelog:
  - fix refusal to chdir/start file action when spaces are typed in
    command prompt and Enter is pressed (#151637)
  - undefinition of umode_t for ppc64 is no more needed


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.5
changelog:
  - update from CVS
  - sync the .utf8 patch with upstream
  - fix infinite loop hang when copying/deleting some strangely
    named files (#150569)
  - drop BuildRequires to gettext, XFree86-devel -> xorg-x11-devel
  - don't define umode_t on ppc64


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.4
changelog:
  - update from CVS (fixes #143586)
  - merge all UTF-8 related patches to single .utf8 patch
  - drop BuildRequires gettext-devel, autopoint no more needed


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.3
changelog:
  - rewrote mbstrlen() in utf8 patch, this fixes:
    - dir name truncation in command prompt for ja_JP, ko_KR locales (#142706)
    - localized texts will fit dialog windows and pull-down menus - tweak create_menu()
    - dialog titles are centered correctly
  - fix bad displaying of mc logo in help (#143415)
  - merge msglen patch with utf8 patch


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.2
changelog:
  - update from CVS - problem in uzip.in fixed by upstream (#141844)
  - fix msglen patch to deal with wide UTF-8 characters (#141875)


author: Jindrich Novy <jnovy@redhat.com> 4.6.1a-0.1
changelog:
  - update from CVS
  - sync UTF-8 patches with upstream
  - drop upstreamed badsize, growbuf patches
  - faster FISH upload support (#140750) - from Dmitry Butskoj


author: Jindrich Novy <jnovy@redhat.com>
changelog:
  - add msglen patch to calculate message length correctly in UTF-8 (#141875)
    (thanks to Nickolay V. Shmyrev)
  - convert hints for ru, uk, zh, man page conversion fix


author: Jindrich Novy <jnovy@redhat.com> 4.6.1-0.11
changelog:
  - update from CVS
    - fix #141095 - extraction of symlinks from tarfs is now fine
  - add growbuf patch from Roland Illig #141422 to view files
    in /proc and /sys properly


author: Jindrich Novy <jnovy@redhat.com> 4.6.1-0.10
changelog:
  - update from CVS
  - update promptfix patch, drop upstreamed strippwd patch
  - add badsize patch to fix displaying of filesizes >2GB
  - sync UTF-8 patches with upstream
  - replace autogen.sh style with configure


author: Jindrich Novy <jnovy@redhat.com> 4.6.1-0.9
changelog:
  - update from CVS
  - convert help files in /doc to UTF-8
  - add --enable-charset (#76486)
  - drop upstreamed 8bitdefault, extfs patch
  - update partially upstreamed strippwd and extension patches
  - add UTF-8 help patch from Vladimir Nadvornik (#136826)
  - add promptfix patch


author: Jindrich Novy <jnovy@redhat.com>
changelog:
  - drop upstreamed smallpatches patch
  - install non-en man pages and fix encoding (#137036)
  - fix possible mem leak in strippwd patch


author: Jindrich Novy <jnovy@redhat.com> 4.6.1-0.8
changelog:
  - update from CVS
  - drop mc-php.syntax, more recent version in upstream
  - add utf8-input patch
  - sync strippwd, uglydir, extensions patches with upstream
  - add 8bitdefault patch to enable 8-bit input by default


author: Jindrich Novy <jnovy@redhat.com> 4.6.1-0.7
changelog:
  - update from CVS
  - sync strippwd patch with upstream
  - merged hp48.in patch to extfs patch (from Leonard den Ottolander)
  - rebuilt


author: Jindrich Novy <jnovy@redhat.com> 4.6.1-0.6
changelog:
  - update from CVS
  - drop upstreamed vcsa and xtermaliases patches
  - sync the rest of the patches with upstream
  - update strippwd patch to eliminate passwords from dir hotlist
    and chdir error messages
  - update perl scripts (Leonard den Ottolander, #127973, CAN-2004-0494)


author: Jindrich Novy <jnovy@redhat.com> 4.6.1-0.3
changelog:
  - patch to prevent displaying passwords in ftp paths (#131088)
    - also removes pswd from Delete/Copy/Error dialogs, etc.
  - added patch to fix/add extensions in mc.ext.in (#124242)


author: Karel Zak <zakkr@zf.jcu.cz>
changelog:
  - patch to prevent hangs on directory with '\n' in name, (#127164)
  - UTF8 hints support
  - original hint files conversion to UTF8 in the spec file


author: Jakub Jelinek <jakub@redhat.com> 4.6.1-0.1
changelog:
  - update from CVS
    - handle INFO/LICENSE and INFO/OBSOLETES in rpm vfs (#67341)
  - remove mc-cvs-unzip (#85073)
  - fix hotkey handling when not UTF-8 (Leonard den Ottolander, #120735)
  - allow terminal aliases for keys in mc.lib and ~/mc/ini,
    add gnome, xterm-new and rxvt aliases for xterm (#128163)


author: Jakub Jelinek <jakub@redhat.com> 4.6.0-12
changelog:
  - fix a bug in complete.c introduced by last patch
  - export MC_TMPDIR env variable
  - avoid integer overflows in free diskspace % counting
  - put temporary files into $MC_TMPDIR tree if possible,
    use mktemp/mkdtemp


author: Jakub Jelinek <jakub@redhat.com> 4.6.0-11
changelog:
  - fix a bunch of buffer overflows and memory leaks (CAN-2004-0226)
  - fix hardlink handling in cpio filesystem
  - fix handling of filenames with single/double quotes and backslashes
    in /usr/share/mc/extfs/rpm
  - update php.syntax file (#112645)
  - fix crash with large syntax file (#112644)
  - update CAN-2003-1023 fix to still make vfs symlinks relative,
    but with bounds checking


author: Warren Togami <wtogami@redhat.com> 4.6.0-7
changelog:
  - BuildRequires glib2-devel, slang-devel, XFree86-devel,
    e2fsprogs-devel, gettext
  - Copyright -> License
  - PreReq -> Requires
  - Explicit zero epoch in versioned dev dep
  - /usr/share/mc directory ownership
  - Improve summary
  - (Seth Vidal QA) fix for CAN-2003-1023 (Security)


author: Jakub Jelinek <jakub@redhat.com> 4.6.0-2
changelog:
  - kill unneeded patches, update the rest for 4.6.0
  - build with system slang
  - first part of UTF-8ization


author: Havoc Pennington <hp@redhat.com> 4.6.0pre3-3
changelog:
  - drop our translations, they are surely out of date
  - ugh, due to spec file weirdness hadn't actually used the new pre3
    tarball. disabled patches that no longer apply.
  - patch for #78506


author: Havoc Pennington <hp@redhat.com>
changelog:
  - 4.6.0-pre1
  - comment out the patches that don't apply, 
    if someone wants to spend time fixing them 
    that'd be great


author: Karsten Hopp <karsten@redhat.de> 4.5.55-10
changelog:
  - support large files (#65159, #65160)
  - own /usr/lib/mc/extfs and /usr/lib/mc/syntax
  - fix NL translation (#63495)


author: Havoc Pennington <hp@redhat.com>
changelog:
  - don't build --with-included-slang on upstream recommendation
  - add uzip method from cvs, fixes some sort of format string problem
  - get fix for breaking zip files while browsing them from upstream


author: Havoc Pennington <hp@redhat.com>
changelog:
  - cons.saver rewrite to use vcsa user from Jakub, #61149
  - make cons.saver attr(4711, vcsa, root)
  - require new dev package


author: Havoc Pennington <hp@redhat.com>
changelog:
  - rebuild in rawhide
  - fix prefix/share -> datadir
  - comment out gmc/mcserv subpackages, place order for asbestos suit


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - run %configure in the build phase, not the setup
  - modify Tim's patch to always just edit one file


author: Jakub Jelinek <jakub@redhat.com>
changelog:
  - builtin cpio vfs, change rpm extfs to use it -
    should speed up e.g. copyout from rpm by orders of magnitude
    patch by Jan Hudec <jhud7196@artax.karlin.mff.cuni.cz>
  - fix buglet in the patch


author: Jonathan Blandford <jrb@redhat.com>
changelog:
  - updated mc to work with mc 4.5.36.  Thanks to Brian Ryner
    <bryner@uiuc.edu> for providing the patch.


author: Michael Fulbright <drmike@redhat.com>
changelog:
  - removed rpm menu defs - we depend on gnorpm for these
  - fixed bug that caused crash if group doesnt exist for file


author: Michael Fulbright <drmike@redhat.com>
changelog:
  - version pre-4.5.30 with patch to make this link on alpha properly
    Mark as version 0.7 to denote not the official 4.5.30 release


author: Michael Fulbright <drmike@redhat.com>
changelog:
  - version 4.5.29
  - added default desktop icons for Red Hat desktop
  - added redhat-logos to requirements
  - added README.desktop to doc list for gmc
  - added locale data


author: Tomasz Kłoczko <kloczek@rudy.mif.pg.gda.pl>
changelog:
  - added --without-debug to configure,
  - modification in %build and %install and cosmetic modification in packages
    headers,
  - added %{PACKAGE_VERSION} macro to Buildroot,
  - removed "rm -rf $RPM_BUILD_ROOT" from prep section
  - removed Packager field.


author: Michele Marziani <marziani@fe.infn.it>
changelog:
  - Merged spec file with that from RedHat-5.0 distribution
    (now a Hurricane-based distribution is needed)
  - Added patch for RPM script (didn't always work with rpm-2.4.10)
  - Corrected patch for mcserv init file (chkconfig init levels)
  - Added more documentation files on termcap, terminfo, xterm


author: Tomasz Kłoczko <kloczek@rudy.mif.pg.gda.pl>
changelog:
  - updated to 4.1.6
  - added %attr macros in %files,
  - a few simplification in %install,
  - removed glibc patch,
  - fixed installing /etc/X11/wmconfig/tkmc.


author: Michele Marziani <marziani@fe.infn.it>
changelog:
  - added support for mc alias in /etc/profile.d/mc.csh (for csh and tcsh)
  - lowered number of SysV init scripts in /etc/rc.d/rc[0,1,6].d
    (mcserv needs to be killed before inet)
  - removed all references to $RPM_SOURCE_DIR
  - restored $RPM_OPT_FLAGS when compiling
  - minor cleanup of spec file: redundant directives and comments removed


author: Michele Marziani <marziani@fe.infn.it>
changelog:
  - removed all references to non-existent mc.rpmfs
  - added mcedit.1 to the %files section
  - reverted to un-gzipped man pages (RedHat style)
  - removed double install line for mcserv.pamd


author: Tomasz Kłoczko <kloczek@rudy.mif.pg.gda.pl>
changelog:
  - added new rpmfs script,
  - removed mcfn_install from mc (adding mc() to bash enviroment is in
    /etc/profile.d/mc.sh),
  - /etc/profile.d/mc.sh changed to %config,
  - removed %{prefix}/lib/mc/bin/create_vcs,
  - removed %{prefix}/lib/mc/term.


author: Tomasz Kłoczko <kloczek@rudy.mif.pg.gda.pl>
changelog:
  - new version 3.5.27,
  - %dir %{prefix}/lib/mc/icons and icons removed from tkmc,
  - added commented xmc part.


author: Tomasz Kłoczko <kloczek@rudy.mif.pg.gda.pl>
changelog:
  - FIX spec:
     - added URL field,
     - in mc added missing %{prefix}/lib/mc/mc.ext, %{prefix}/lib/mc/mc.hint,
       %{prefix}/lib/mc/mc.hlp, %{prefix}/lib/mc/mc.lib, %{prefix}/lib/mc/mc.menu.


author: Tomasz Kłoczko <kloczek@rudy.mif.pg.gda.pl>
changelog:
  - added making packages: tkmc, mcserv (xmc not work yet),
  - gziped man pages,
  - added /etc/pamd.d/mcserv PAM config file.
  - added instaling icons,
  - added /etc/profile.d/mc.sh,
  - in %doc added NEWS README,
  - removed %{prefix}/lib/mc/FAQ,
  - added mcserv.init script for mcserv (start/stop on level 86).


author: Steve Dickson <steved@redhat.com> - 0.3.1-1.1
changelog:
  - Updated to latest upstream version 0.3.1 which eliminated the 
    need for the patches introduced in the previous commit.


author: Tom "spot" Callaway <tcallawa@redhat.com> 0.3.0-1.1
changelog:
  - lose the BR for autotools
  - Patch in support for destdir
  - use %configure macro, make DESTDIR= install
  - add sparc to -fPIE (trivial, but correct)
  - destdir revealed missing/poorly created symlink, patch fixes it, add nfs4_editfacl to files
  - LDFLAGS passed to configure/exported were being blindly overwritten, patch fixes


author: Steve Dickson <steved@redhat.com> - 0.3.0-1
changelog:
  - Updated to latest upstream version 0.3.0
  - Fixed minor issues in spec file from the package review


author: Ivana Varekova <varekova@redhat.com> - 7.0.2-2
changelog:
  - Resolves: #451626
    switch off SMP_RACE option
  - Resolves: #458811
    fix -I problems on ia64 machine
  - Resolves: #369981
    add two extended nfs fields


author: Ivana Varekova <varekova@redhat.com> - 7.0.2-1
changelog:
  - Resolves: #223138 
    update to 7.0.2
  - Resolves: #243307
    problem with empty debuginfo package
  - Resolves: #369951
    too much open files
  - Resolves: #229760
    add hotplug CPU support
  - Resolves: #236934
    sar command exits with "realloc: Success" 
    see 7.0.0-7.0.1 changelog
  - Resolves: #177540
    add option to iostat which emables it to show 
    the registered device names for device mapper devices


author: Charles Bennett <ccb@redhat.com> 5.0.5-5.fc
changelog:
  - bring in filename and append-msg patch
  - append-msg adds verbose text for when saNN data file cpu count
  -  does not match cpu count on the currently running system


author: Nils Philippsen <nphilipp@redhat.com>
changelog:
  - version 5.0.5
  - remove some obsolete patches
  - update statreset, overrun, lib64init patches
  - renumber patches


author: Alan Cox <alan@redhat.com>
changelog:
  - Fix spew of crap to console at startup
  - Fix order of startup (#124035)
  - Fix array overrun (#117182)
  - Fix interrupt buffer sizing (caused bogus irq info)


author: Nils Philippsen <nphilipp@redhat.com> 5.0.0-0.6
changelog:
  - let user configure how long to keep logs through /etc/sysconfig/sysstat
    (#81294)
  - reset stats at system boot (#102445)


author: Nils Philippsen <nphilipp@redhat.com> 5.0.0-0.4
changelog:
  - fix insecure tmp files in scripts (#78212)
  - require tools needed in scripts
  - use IFNAMSIZ from /usr/include/linux/if.h for maximum interface length


author: Trond Eivind Glomsrød <teg@redhat.com> 4.0.3-2
changelog:
  - Do the daily sa2 run just before midnight, not at 4AM... you'd 
    only get 4 hours worth of data that way (#63132)


author: Trond Eivind Glomsrød <teg@redhat.com> 4.0.2-1
changelog:
  - 4.0.2
  - the kernel patch for extended statistics is in, don't say it needs
    applying in the man page


author: Preston Brown <pbrown@redhat.com>
changelog:
  - Summarize previous day's activity with sa2, not current day (which is only 4 hours of data when it gets run) (#24820)
  - upgrade to 3.3.4 for full 2.4 compatibility and improved iostat


author: Preston Brown <pbrown@redhat.com>
changelog:
  - make sure disk accounting is enabled to fix iostat -l, -p (#16268)
  - crontab entries were missing the user (root) to run as (#18212)


author: Preston Brown <pbrown@redhat.com>
changelog:
  - packaged for Winston
  - change va patch to indicate kernel is not patched for iostat accounting.
    re-enable if our stock kernel gets this patch.
  - upgrade to 3.2.
  - install crontab entry.


author: Jan Zeleny <jzeleny@redhat.com> - 1.0.7-3
changelog:
  - replaced unofficial 1.0.7 source tarball with official one
  - update of Makefile, part of it moved to postinstall section
    of spec file


author: Ondrej Vasik <ovasik@redhat.com> - 2.4.0-3
changelog:
  - added /usr/src/debug, /usr/src/kernels (#487568)
  - added several /usr/share/locale dirs (#487568)
  - added /usr/share/man{0,1,3]p to owned files (#487568)
  - added ownership for /usr/share/man/<locale>/man<xy> (#487568)
  - added URL, project on fedorahosted


author: Phil Knirsch <pknirsch@redhat.com> - 2.3.7-2
changelog:
  - Fixed games location according to FHS 2.1 (#165425)
  - Added {_libdir}/sse2 to owned files (#192853)
  - Added /dev to owned files (#192860)
  - Added {_datadir}/icons to owned files (#195911)
  - Dropped obsolete /etc/X11/starthere (#191163)


author: Bill Nottingham <notting@redhat.com> 2.2.3-1
changelog:
  - move /usr/dict to /usr/share/dict (#113645)
  - add /usr/lib/locale, /var/empty (#108686,#113036)
  - add */%{_lib}/tls (#113050)


author: Preston Brown <pbrown@redhat.com>
changelog:
  - /etc/opt, /usr/share/{info,man/man*,misc,doc} (FHS 2.1)
  - added /var/games.  Data should move from /var/lib/games to there (FHS 2.1)
  - bump version up to 2.0 already!


author: Erik Troan <ewt@redhat.com>
changelog:
  - added /var/db
  - set attributes in the spec file; don't depend on the ones in the cpio
    archive
  - use a tarball instead of a cpioball


author: Ryan McCabe <rmccabe@redhat.com> 1.0.57-3
changelog:
  - Fix Red Hat bugzilla tickets: 352631 436939 474155 476260 488957 491798 515443 517140 520866 530171


author: Jim Parsons <jparsons@redhat.com> 1.0.21-1
changelog:
  -  Some gui fixups, support for file system IDs, and some exposure of a few additional rgmanager params


author: Stanko Kupcevic <kupcevic@redhat.com> 1.0.13-1
changelog:
  -  Fixes for bz161344, 160264, 160127, 163673, 163237, 160240, 164407, 159965, 165130, 165140, 161974, 165169, 164936, 165184, 164857, 166663, 166140, and validation of IP addresses.


author: Jim Parsons <jparsons@redhat.com> 0.9.17-1
changelog:
  - Fixes for bz149123, 149885, 149660, 149508, 149488, 149897,
      150895, 150813, 149124, 149662, 149128, 149508, 149545, 149707


author: Jim Parsons <jparsons@redhat.com> 0.9.12-1
changelog:
  - Fixes for bz149897, 149123, 149124, 149674, 149676, 149761, 149269, 149670.
      Also added in Service Creation dialog panel.


author: Jim Parsons <jparsons@redhat.com> 0.9.5-1
changelog:
  - Many fixes and completions. Added check boxes for restricted
      and ordered failover domains. Added properties for fences.
      Fixed bug in fence devices section. Added support for GULM
      in UI.


