#!/usr/pkg/bin/perl  

# Check options and load configuration files
&init;

########################################################################
####                   Site configuration                            ###
########################################################################
# Set the following variables according to the requirements of your site
# Alternatively, copy the lines up to "End of configuration options"
# to your $HOME/.makesegments.cnf or $PWD/.makesegments.cnf for  
# overriding system-wide defaults

# These settings are OVERRIDDEN by corresponding command line options!
#
# This part of the program is run after any configuration file,
# config file settings therefore override anything set here

# Location to look for L2H-supported LaTeX styles
$LATEX2HTMLSTYLES="/usr/local/lib/texmf/latex2html/styles" 
    unless $LATEX2HTMLSTYLES;

# Location for TeX style files etc.
# $TEXINPUTS is read from the environment if not explicitly supplied
$TEXINPUTS=$ENV{'TEXINPUTS'} unless $TEXINPUTS;
$TEXINPUTS=".:/usr/local/lib/texmf/tex//" unless $TEXINPUTS;

# Location for BibTeX Bibliography databases
# $BIBINPUTS is read from the environment if not explicitly supplied
$BIBINPUTS=$ENV{'BIBINPUTS'} unless $BIBINPUTS;
$BIBINPUTS=".:/usr/local/lib/texmf/bibtex/bib/" unless $BIBINPUTS;

# Location for BibTeX Bibliography styles (in addition to $TEXINPUTS)
# $BSTINPUTS is read from the environment if not explicitly supplied
$BSTINPUTS=$ENV{'BSTINPUTS'} unless $BSTINPUTS;
$BSTINPUTS="/usr/local/lib/texmf/bibtex/bst/" unless $BSTINPUTS;

# The lowest sectioning command at which to create segments
# corresponds to -l option
$LEVEL="section" unless $LEVEL;

# set this to 1 if you want no Makefile by default
# corresponds to -n option
$NOMAKE=0 unless $NOMAKE;

# Set this to one if LaTeX style files should be searched for by default
# corresponds to -s option
$CHECK_LATEX_STYLES=0 unless $CHECK_LATEX_STYLES;

# Zeroeth-segment name (type makesegments -h for explanation)
# corresponds to -z option
$SEGSTART="a0" unless $SEGSTART;

# Set this to one to supress inlining input files
# corresponds to -i option
$IGNOREINPUTS=0 unless defined $IGNOREINPUTS;

# Set this to one to suppress copying required input files
# corresponds to -d option
$DONTCOPY=0 unless defined $DONTCOPY;

# Set this to one to softlink input files instead of copying them
# corresponds to -u option
$USELINKS=0 unless defined $USELINKS;

# SPECIALS=1 means that special sections (table of contents,
#  bibliography, index...) are put into special segments
# corresponds to -e option
$SPECIALS=0 unless defined $SPECIALS;

# Hash SPECIALNAMES defines standard filenames for 
# The special segments. (For tableofcontents, toc.tex resp. toc.html)
# Undefined entries (those commented out below)
# will not create a special segment.
%SPECIALNAMES=(
    "tableofcontents" => "toc",
    "printindex" => "ind",
#    "listoffigures" => "lof",
#    "listoftables" => "lot",
#    "bibliography" => "bbl",
#    "thebibliography" => "tbl",
	       );

# URL titles for special segments. Customize if you need titles in other
# languages.
%SPECIALTITLES=(
    "tableofcontents" => "Contents",
    "listoffigures" => "Figures",
    "listoftables" => "Tables",
    "bibliography" => "References",
    "thebibliography" => "References",
    "printindex" => "Index");

#####################################
## Options for Makefile generation ##
#####################################

# set $TEXENV to TEXINPUTS=.:(my_tex_path) PKFONTS=.:(my_PK_font_path) ...
# if you need to set these environment vars before starting latex
# You may also say $TEXENV="TEXINPUTS=$TEXINPUTS..." if you've set $TEXINPUTS
$TEXENV="" unless $TEXENV;

# accordingly, set $DVIPSENV for dvips
$DVIPSENV="" unless $DVIPSENV;

# Insert special paths (and options) for executables, if required
$LATEX="$TEXENV latex" unless $LATEX;
$BIBTEX="bibtex -verbose" unless $BIBTEX;
$MAKEINDEX="makeindex" unless $MAKEINDEX;
$DVIPS="$DVIPSENV dvips" unless $DVIPS;
$L2H="latex2html" unless $L2H;
$MAKE="make" unless $MAKE;
$TOUCH="touch" unless $TOUCH;

# LaTeX2HTML command line options for all files
$MAKE_COMMON="-index_in_navigation -contents_in_navigation"
    unless $MAKE_COMMON;

# LaTeX2HTML command line options for child segments
$MAKE_CHILDREN="-info \"\"" unless $MAKE_CHILDREN;

# LaTeX2HTML command line options for master file
$MAKE_TOP="" unless $MAKE_TOP;

########################################
### EXPERTS ONLY:
########################################

# Define additional LaTeX commands to be recognized

%USER_CMDS=();

# syntax:
# %USER_CMDS=("cmd1_name" => [cmd1_arguments],
#             "cmd2_name" => [cmd2_arguments],
#             ...)
#
# cmdX_arguments is a list of the arguments in correct order,
# $m for mandatory, $o for optional arguments.
#
# Give an empty list if no arguments are required.
#
# Example:
# %USER_CMDS=("parbox" => [$o,$m,$m], "newline" => [])
# to make makesegments recognize parbox commands.
# 
# Supply an additional entry for the starred command if it takes
# different arguments (but beware the same do... routine will be called!)
# 
# See the syntax of %misc_cmds below for further examples.

# You may add Perl code to support your commands by defining
# a subroutine "do_command".
# Example: Write all parboxes to a file "parboxes":
#
# sub do_parbox {
#    parboxnum++;
#    open (PARBOX,">>parboxes");
#    print PARBOX "parbox No. $parboxnum, $command".join('',@args)."\n";
#    print PARBOX "position: $opt[0], width=$mand[0]\n";
#    print PARBOX "text: $mand[1]\n";
#    close PARBOX;
# };
#
# The optional arguments can be retrieved from array @opt,
# mandatory ones from @mand (parens and whitespace stripped).
# Complete argument list is @arg (with parens).
# $star is "*" if the command was encountered in a starred version. 
#
# You MUST add "parbox" to %USER_CMDS to activate your routine!
#

# See below for examples.

1; # This should be the last line of your configuration script

########################################################################
####             End of configuration options                        ###
####           Do not modify below this line !                       ###
########################################################################

# Make sure that command line options override config-file settings    
# (users might omit unless defined ... in their config files)
$O_LEVEL && ($LEVEL=$O_LEVEL);
$O_DIR && ($DIR=$O_DIR);
$O_OUTFILE && ($OUTFILE=$O_OUTFILE);
$O_SEGSTART && ($SEGSTART=$O_SEGSTART);
$O_CHECK_LATEX_STYLES && ($CHECK_LATEX_STYLES=$O_CHECK_LATEX_STYLES);
$O_NOMAKE && ($NOMAKE=$O_NOMAKE);
$O_IGNOREINPUTS && ($IGNOREINPUTS=$O_IGNOREINPUTS);
$O_DONTCOPY && ($DONTCOPY=$O_DONTCOPY);
$O_USELINKS && ($USELINKS=$O_USELINKS);
$O_SPECIALS && ($SPECIALS=$O_SPECIALS);

# Specify the allowed segmentation levels
%levels=("document" => 0,
	 "part" => 1,
	 "chapter" => 2,
	 "section" => 3,
	 "subsection" => 4,
	 "subsubsection" => 5);

%nosegment_cmds=(
    "tableofcontents" => [],
    "listoffigures" => [],
    "listoftables" => [],
    "bibliography" => [$m],
    "printindex" => []);

%label_cmds=("label" => [$m]);
%ref_cmds=("ref" => [$m],
	   "pageref" => [$m]);
%index_cmds=("index" => [$m]);
%misc_cmds=(
	    "usepackage" => [$o,$m],
	    "internal" => [$o,$m],
	    "endinput" => [],
# \no mandatory arg specified for \input 
# (people may use tex-style \input myfile)
	    "input" => [],
	    "include" => [$m],
	    "title" => [$m],
# newcommand ... are included only because their arguments should be
# read by parse_simple_block rather than parse_latex_block
	    "newcommand" => [$m,$o,$m],
	    "renewcommand" => [$m,$o,$m],
	    "newenvironment" => [$m,$o,$m,$m],
	    "renewenvironment" => [$m,$o,$m,$m],
	    "documentclass" => [$o,$m],
	    "documentstyle" => [$o,$m],
	    "bibliographystyle" => [$m],
	    "begin" => [$m],
	    "end" => [$m],
	    "segment" => [$m,$m,$m],
	    "includegraphics" => [$o,$m],
	    "includegraphics*" => [$o,$o,$m],
	    "epsfig" => [$m],
	    "html" => [$m],
	    "hyperref" => [$m,$m,$m,$m],
	    "htmlref" => [$m,$m],
	    %USER_CMDS);

%nosegment_envs=(
    "thebibliography" => []);

@bibfiles=();
@files_to_copy=();

# die if no input file specified
!$FILE && die "$usage_string\n\nmakesegments: No filename specified!\n";

# add .tex to filename if it isn't already there
!($FILE =~ /[.]tex$/) && do { $FILE=$FILE.".tex" };
# strip unnecessary /./ and ./ from filename
$FILE =~ s|/[.]/|/|g;
$FILE =~ s|^[.]/||;

!defined($levels{$LEVEL}) && 
    die "\nmakesegments: level $LEVEL not allowed!\nValid levels are: ".
    join(', ',(sort {$levels{$a} <=> $levels{$b}} (keys %levels)))."\n\n";

!defined($DIR) && do { 
    $DIR="segmented"; 
    print STDERR "No directory specified: trying ./$DIR\n" ;
};

# strip unnecessary /./ from dirname. assume current if no dir specified.
$DIR =~ s|/[.]/|/|g;
$DIR =~ s|^[.]/||;

if (!defined ($OUTFILE)) {
    if ($DIR =~ /^[.]$/) {
	($OUTFILE=$FILE) =~ s/[.]tex$/_seg.tex/;
# do not copy include files into the current directory
	$DONTCOPY=1;
    } else { ($OUTFILE=$FILE) =~ s|.*/|| };
    print STDERR "No output file specified: trying $DIR/$OUTFILE\n";
};
    
($OUTFILE =~ m|/|) && die "\nmakesegments: must use a simple filename with the -o option\n";

!($OUTFILE =~ /[.]tex$/) && do { $OUTFILE=$OUTFILE.".tex" };

$PWD=$ENV{"PWD"}."/";

if ($DIR =~ m|^/|) {
    $fulldir=$DIR } else { $fulldir="$PWD$DIR" };
$fulldir =~ s|/[.]$|| unless ($DIR =~ m|^/|);

if ($FILE =~ m|^/|) {
    $fullfile=$FILE } else { $fullfile="$PWD$FILE" };

($fullfile =~ m|^$fulldir/$OUTFILE$|) && die "\nmakesegments: can't overwrite $FILE!\n";

!(-f $FILE) && die "\nmakesegments: $FILE doesn't exist!\n" ;

if (-e $DIR) {
    stat $DIR;
    !(-d _) && die "\nmakesegments: $DIR is not a directory!\n";
    !(-r _) && die "\nmakesegments: $DIR is not readable!\n";
    !(-w _) && die "\nmakesegments: $DIR is not writable!\n";
    !(-x _) && die "\nmakesegments: $DIR is not executable!\n";
    if (-e $OUTFILE) {
	!(-w $OUTFILE) && die "\nmakesegments: $OUTFILE exists and is non-writable!\n"
	}
    } 
else {
    !(mkdir $DIR, 0777)
	&& die "\nmakesegments: can\'t create $DIR!\nsystem error:$!\n"
	};


foreach $key (keys %levels) {
    $segments{$key} = [$o,$m] unless ($levels{$key} > $levels{$LEVEL});
};

&make_known_cmds;

$begin_env_re='\\\\begin\\s*\\{\\s*([^\}\s]+)\\s*\\}';
$begin_simple_re='([\\{]|[\\[])';
$end_simple_re='([\\}]|[\\]])';
$simple_delim_re='([\\{]|[\\[]|[\\}]|[\\]])';
$begin_block_re='([\\$]|[\\{]|[\\[]|\\\\begin\\s*\\{\\s*[^\}]+\\s*\\})';
$end_block_re='([\\$]|[\\}]|[\\]]|\\\\end\\s*\\{\\s*[^\}]+\\s*\\})';
$ord_command_re='(\\\\\\w+[*]?)';
$special_re='('.$begin_block_re.'|'.$end_block_re.'|'.$ord_command_re.')';

$command_re='(\\\\[\@\\w]+[*]?|\\\\[ !\\"\\$%&\'\\(\\)+,\\-.\\/:;<=>\\[\\]\\^_\\`{}|~]'.
    '|\\\\a[=\'\\`]|\\\\\@\\.)';
$no_escape_re='(^|[^\\\\])((?:\\\\\\\\)*)';
$use_html_mark="\001<<HTML>>";
$begin_htmlonly_mark="\001<<BEGIN_HTMLONLY>>";
$end_htmlonly_mark="\001<<END_HTMLONLY>>";


$input="IN000";
$output="OUT000";
$segname=$SEGSTART;
$preamble=1;
$head="";
$ERROR="";

@l2hinputs=split(/:/,($ENV{'LATEX2HTMLSTYLES'} ? 
		      $ENV{'LATEX2HTMLSTYLES'}:$LATEX2HTMLSTYLES));

@texinputs=split(/:/,$TEXINPUTS);
@bibinputs=split(/:/,$BIBINPUTS);

@bstinputs=split(/:/,$BSTINPUTS);
@graphicsinputs=@texinputs;
@graphicsextensions=(".ps",".eps",".gif",".prn");

%packages=();

@temporary_files=();

($outname=$OUTFILE) =~ s/[.]tex//;

($tmp_out = $OUTFILE) =~ s/[.]tex$/.tmp/;

print STDERR "\nPass 1: Analyzing $FILE ...\n\n";
&push_input($FILE);

#print STDERR "first line: $_\n";

($one,$two)=&parse_latex_block("",$_);

&pop_output;
&pop_input;

print STDERR "\nPass 2: looking for dependencies & linking segments\n\n";

&dependencies;

&write_segments;

&make_makefile unless $NOMAKE;

print STDERR "Done.\n";

exit 0;

sub get_next_line {
#    print STDERR "%";
    if (eof ($input)) { 
	if ($#inhandle > 0) { 
	    &pop_input ;
	} else { 
	    die "\nmakesegment: Reached eof before end of block !\n" ;
	};
    };
    my ($line);
    $line=<$input>;
#    print STDERR "get: $line\n";
    chomp $line;
    $line;
}

sub gently_get_next_line {
#    print STDERR "&";
    if (eof ($input)) { 
	if ($#inhandle > 0) { 
	    &pop_input ;
	} else { 
	    $ERROR="\nmakesegment: Reached eof before end of block !\n" ;
	};
    };
    my ($line);
    $line=<$input>;
#    print STDERR "gently: $line\n";
    chomp $line unless $ERROR;
    ($ERROR ? "" : $line );
}

sub parse_latex_block {
    local ($_);
    my ($start);
    ($start,$_)=@_;
    my ($comment,$block,$delim,$after,$verb);
    local ($env,$done,$end_re);
    local $foundend=0;
    $env="";
    $verb="";
    local $gentle=0;
    local $direct="";
    $done=$start;
    $start =~ s/\s//g;
# check which kind of block
  TYPE: {
      length($start) == 0 && do { 
# This is only allowed for the outermost block
	  $gentle=1;
	  $preamble=1;
	  $end_re="";
	  $direct=&push_output ("$DIR/$tmp_out");
	  $cur_seg=$SEGSTART;
	  $segment_names{$cur_seg}="document";
	  last TYPE };
      $start =~ /^\{$/ && do {
	  $end_re='\}';
	  last TYPE };
      $start =~ /^\[$/ && do {
	  $end_re='\]';
	  last TYPE };
      $start =~  /^\\begin\{(\w+)([*]?)\}$/ && do {
	  $env=$1.($2 ? "\[$2\]" : "");
	  $end_re='\\\\end\s*\{\s*'.$env.'\s*\}';
	  last TYPE };
      $start =~ /^\$$/ && do {
	  $end_re='\$';
	  last TYPE };
      die "\nparse_latex_block: invalid opening delimiter: \"$start\"!\n";
  };
#    print STDERR "Entering block: $start...$end_re\n";
    while (1) {
#	    print STDERR "line $.: \"$_\"\n";
	($_,$comment)=&strip_comment($_);
      CASE: {
	  s/^\s*$// && do {
	      if ($direct) { if ($preamble)
			     { $head.="$&$comment\n" } else { print "$&$comment\n" } } 
	      else { $done.="$&$comment\n" };
	      $comment="";
	      $_=&gently_get_next_line;
	      if ($ERROR) {
		  if ($gentle) {
		      return ("","");
		  } else {
		      die $ERROR; 
		  };
	      };
	      last CASE;
	  };
# handle \verb
	  s/$no_escape_re(\\verb[*]?)(.*)$//o && do {
	      $_.="$1$2";
	      $verb=$3;
	      $comment="$4$comment";
# No last statement here - continue with \verb-stripped $_ and $verb set
	  };
	  s/$no_escape_re$special_re//o && do {
	      if ($direct) { if ($preamble) { $head.="$`$1$2" } else { print "$`$1$2" } } 
	      else { $done.="$`$1$2" };
	      $after=$';
	      ($delim=$3)=~ s/\s*//g;
#		  print STDERR "BlockRE: $&, $1, $2, \"$delim\", $after\n";
	    DELIM: {
# we're done
		$end_re && ($delim =~ /^$end_re$/) && do {
		    if ($direct) { 
			while ($#outhandle > 0 ) { 
			    &pop_output } 
		    };
		    return ("$done$delim","$after$verb$comment");
		};
# It's an environment begin
		$delim =~ /^$begin_env_re$/	&& do {
		    ($block,$after)=&process_env($delim,"$after$verb$comment");
#		    if ($gentle){ print STDERR "MAIN: closed $delim : $direct :".select."\n"};
		    if ($direct && !(select =~ /$direct$/)) { $direct="" }; 
		    if ($direct) { if ($preamble) { $head.=$block } else { print $block} } 
		    else { $done.=$block };
		    $comment="";
		    $verb="";
		    $_=$after;
		    last CASE;
		};			
		$delim =~ /^$begin_block_re$/ && do {
# It's a block begin
		    ($block,$after)=&parse_latex_block($delim,"$after$verb$comment");
#		    if ($gentle){ print STDERR "MAIN: closed $delim : $direct :".select."\n"};
		    if ($direct && !(select =~ /$direct$/)) { $direct="" }; 
		    if ($direct) { if ($preamble) { $head.=$block } else { print $block} } 
		    else { $done.=$block };
		    $comment="";
		    $verb="";
		    $_=$after;
		    last CASE;
		};
		$delim =~ /^$end_block_re$/ && do {
		    if ($delim =~ /^\]/) {
			if ($direct) { if ($preamble) { $head.=$delim } else { print $delim} } 
			else { $done.=$delim };
#			print STDERR "WARNING: strange block: $done, $after, $_\n";
			$_="$after$comment";
			$comment="";
			$verb="";
			last CASE;
			$_=$after;
		    } else {
			if ($delim =~ /^\}$/) {
			    return ("$done","$delim$after$verb$comment") }
			else {
			    die "\nmakesegments: Block end doesn't match:\n".
				"END: \"$delim\", expected: \"".
				    ($env ? "\\end\{$env\}" : $end_re).
					"\"\ntext:$done\n";}
		    };
	        };
		$delim =~ /^$ord_command_re$/ && do {
		    ($block,$after)=&process_command($delim,"$after$verb$comment");
#			print STDERR "\$delim=$delim, select=".select.", \$direct=$direct\n";
		    if ($direct) { if ($preamble) { $head.=$block } else { print $block} } 
		    else { $done.=$block };
		    if ($foundend) { return ($done,$after) };
		    $comment="";
		    $verb="";
		    $_=$after;
		    last CASE;
		};
	    };
	  };
	  $verb && do {
	      if ($direct) { print "$_$verb" } else { $done.="$_$verb" };
	      ($block,$after)=&process_verb($comment);
#		  print STDERR "VERB FOUND:\n$block\n";
	      if ($direct) { print $block } else { $done.=$block };
	      $comment="";
	      $verb="";
	      $_=$after;
	      last CASE;
	  };
#	      print STDERR "Nothing found on $_\n";
	  if ($direct) { if ($preamble) { $head.="$_$comment\n" } 
			 else { print "$_$comment\n" } }
	  else { $done.="$_$comment\n" };
	  $comment="";
	  $_=&gently_get_next_line;
	  if ($ERROR) {
	      if ($gentle) {
		  return ("","");
	      } else {
		  die $ERROR; 
	      };
	  };
      };
    };
};

sub parse_simple_block {
# Special version, only needed for arguments of commands like
# \newcommand or \newenvironment.
# In these cases, constructs like 
# \newcommand{\beq}{\begin{equation}} are legitimate.
# (would be an error in parse_latex_block, sice environment isn't closed)
# No command parsing is carried out.
# Now generally used for command arguments, since these rarely contain
# environments or commands that need to be parsed
    local ($_);
    my ($start);
    ($start,$_)=@_;
    my ($comment,$block,$delim,$after,$end_re,$done,$verb);
    $verb="";
    $done=$start;
    $start =~ s/\s//g;
# check which kind of block
#    print stderr "Parse_simple_block: $start, $_\n";
  TYPE: {
      $start =~ /^\{$/ && do {
	  $end_re='\}';
	  last TYPE };
      $start =~ /^\[$/ && do {
	  $end_re='\]';
	  last TYPE };
      die "\nparse_simple_block: invalid opening delimiter: \"$start\"!\n";
  };
    while (1) {
#	    print STDERR "line $.: \"$_\"\n";
	($_,$comment)=&strip_comment($_);
      CASE: {
	  s/^\s*$// && do {
	      $done.="$&$comment\n";
	      $comment="";
	      $_=&get_next_line;
	      last CASE;
	  };
# handle \verb
	  s/$no_escape_re(\\verb[*]?)(.*)$//o && do {
	      $_.="$1$2";
	      $verb=$3;
	      $comment="$4$comment";
# No last statement here - continue with \verb-stripped $_ and $verb set
	  };
	  s/$no_escape_re$simple_delim_re//o && do {
	      $done.="$`$1$2";
	      $after=$';
	      ($delim=$3)=~ s/\s*//g;
#		  print STDERR "BlockRE: $&, $1, $2, \"$delim\", $after\n";
	    DELIM: {
# we're done
		$end_re && ($delim =~ /^$end_re$/) && do {
		    return ("$done$delim","$after$verb$comment");
		};
		$delim =~ /^$begin_simple_re$/ && do {
# It's a block begin
		    ($block,$after)=&parse_simple_block($delim,"$after$verb$comment");
		    $done.=$block ;
		    $comment="";
		    $verb="";
		    $_=$after;
		    last CASE;
		};
		$delim =~ /^$end_simple_re$/ && do {
		    if ($delim =~ /^\]/) {
			if ($direct) { if ($preamble) { $head.=$delim } else { print $delim} } 
			else { $done.=$delim };
			print STDERR "PSB WARNING: strange block: $done, $after, $_\n";		    
			$_="$after$comment";
			$comment="";
			$verb="";
			last CASE;
		    } else {
			if ($delim =~ /^\}$/) {
			    return ("$done","$delim$after$verb$comment") }
			else {
			    die "\nmakesegments: Block end doesn't match:\n".
				"$done\nEND: \"$delim\", expected: \"$end_re\"\n";}
		    };
	        };
                   };
	  };
	  $verb && do {
#	      print STDERR "Parse_simple_block: $start, $verb, $_\n";
	      $done.="$_$verb";
	      ($block,$after)=&process_verb($comment);
#	      print STDERR "VERB FOUND:\n$block\n";
	      $done.=$block;
	      $comment="";
	      $verb="";
	      $_=$after;
	      last CASE;
	  };
	  $done.="$_$comment\n";
	  $comment="";
	  $_=&get_next_line;
      };
    };
};


sub process_env {
# $above is local from calling parse_latex_block
    local ($_);
    my ($delim,$env,$done,$after);
    ($delim,$_)=@_;
    $delim =~ $begin_env_re;
    $env=$1;
#    print STDERR "PE: environment \"$env\"\n";
  CASE: {
      $env =~ /document/ && do {
	  !$preamble && die "\\begin{document} encountered after end of preamble !\n";
          $head=&process_preamble($head);
	  $preamble=0;
	  last CASE;
      };
      $env =~ /htmlonly/ && do {
# Ignore inputs in htmlonly blocks 
	  local $IGNOREINPUTS=1;
# Ignore segments 
	  local %segments=();
	  ($done,$_)=&parse_latex_block($delim,$_);
	  $preamble && do {
	      $done =~ s/^\s*\\begin\s*\{\s*htmlonly\s*\}/$begin_htmlonly_mark/;
	      $done =~ s/\\end\s*\{\s*htmlonly\s*\}\s*$/$end_htmlonly_mark/;
	  };
	  return ($done,$_);
      };
      $env =~ /verbatim[*]?|rawhtml/ && do {
	  my $end_re='\\\\end\s*\{\s*'.$env.'\s*\}';
	  while (1) {
	      if (s/$end_re//) {
		  return ("$delim$done$`$&",$');
	      } else {
		  $done.="$_\n";
		  $_=&get_next_line;
	      };
	  };
      };
      defined ($nosegment_envs{$env}) && do {
	  while ($#outhandle > 0) { 
	      $direct="";
	      &pop_output;
	  };
	  $special_sections{$env}="";
	  ($done,$_)=&parse_latex_block($delim,$_);
	  $cur_seg=$SEGSTART;
	  if ($SPECIALS && (defined $SPECIALNAMES{$env})) {
	      open (SPECIAL,">$DIR/$SPECIALNAMES{$env}.tmp");
	      print SPECIAL "\n$done";
	      close SPECIAL;
	      $done=join("\n","\\begin{latexonly}",
#			 "\\DumpCounters\{$SPECIALNAMES{$env}\}\{section\}\{\}",
			 $done,
			 "\\end{latexonly}");
	      push @specialsegments,("$SPECIALNAMES{$env}");
	  };
	  return ($done,$_);
      };
  };
#    print STDERR "processing $env ...";
    ($done,$_)=&parse_latex_block($delim,$_);
    return ($done,$_);
}

sub getargs {
    local($_);
    $_=shift;
    my ($actual,$done,$comment,$delim,@blocks);
    $done="";
    while ($actual=shift) {
	if ($actual eq $m) { $actual="$actual|$ord_command_re" };
	($_,$comment)=&strip_comment($_);
# skip empty or pure comment lines
	while ( s/^\s*$// ) {
	    $done.="$&$comment\n";
	    $_=&get_next_line;
	    if (/^\s*$/) {
		print STDERR "WARNING: empty line found where arguments expected.\n".
		    "Ignoring - but LaTeX won\'t like this! \n"; 
	    };
	    ($_,$comment)=&strip_comment($_);
	};
	if (s/^(\s*)($o|$m|$ord_command_re)//o) {
	    $done.=$1;
	    $delim=$2;
	  CASE: {
	      $delim =~ /$actual/ && do {
		  if ($delim =~ /$ord_command_re/) {
		      ($block,$_)=($&,"$_$comment");
#		      print STDERR "GA: $block, $_\n";
		      push @blocks,("\{$block\}");
		  } else {
		      ($block,$_)=&parse_simple_block ($delim,"$_$comment");
		      push @blocks, ($block);
		  };
		  $done.=$block;
		  $comment="";
		  last CASE;
	      };
# found mandatory, but opt requested
	      ($actual eq $o) && do {
		  push @blocks, ("");
		  $_="$delim$_$comment";
		  last CASE;
	      };
# found opt, but mandatory requested: error
	      die "Wrong arguments to $command: $done $delim $_\n";
	  };
	} else {
	    die "Wrong arguments to $command: $done $delim $_\n";
	};
    };
    ($done,$_,@blocks);
};
	      
sub process_command {
    local($_,$command);
    local ($cmd,@arg,@opt,@mand,$star,$text);
    ($command,$_)=@_;
    $command =~ s/\s*//g;
    $command =~ s/[*]?$//;
    $star=$&;
    $command =~ s/^\\//;
#    print STDERR "command: $command\n";
    if (defined($known_commands{$command})) {
	if ($star && (defined $known_commands{"$command*"})) {
	    ($text,$_,@arg) = &getargs($_,@{$known_commands{"$command*"}});
	} else {
	    ($text,$_,@arg) = &getargs($_,@{$known_commands{$command}});
	};
        map { s/(^\s*|\s*$)//g } @arg;
	@opt = grep { /^\[/ } @arg;
	@mand = grep { /^\{/ } @arg;
	map { s/^\[\s*//; s/\s*\]$// } @opt;
	map { s/^\{\s*//; s/\s*\}$// } @mand;
#	print STDERR "$command ->  @arg : ".join(',',@opt)." -> ".join(",",@mand)."\n";
#	print STDERR "Known command found: $command!\n";
      CMD: {
	  defined (&{"do_$command"}) && do {
	      &{"do_$command"};
	      last CMD;
	  };
	  defined ($segments{$command}) && do {
	      &do_segment_cmd;
	      last CMD;
	  };
	  defined ($nosegment_cmds{$command}) && do {
#	      print STDERR "NOSEG FOUND: $command!\n";	
	      &do_nosegment_cmd;
	      last CMD;
	  };
	  defined ($label_cmds{$command}) && do {
	      &do_label_cmd;
	      last CMD;
	  };
	  defined ($index_cmds{$command}) && do {
	      &do_index_cmd;
	      last CMD;
	  };
	  defined ($ref_cmds{$command}) && do {
	      &do_ref_cmd;
	      last CMD;
	  };
      };
    };
    return (($command ? "\\$command$star" : "").join(" ",@arg),$_);
};

sub do_begin {
    my $block;
    ($block,$_)=&process_env("\\begin\{$mand[0]\}",$_);
    if ($direct && !(select =~ /$direct$/)) { $direct="" }; 
    if ($direct) { if ($preamble) { $head.=$block } else { print $block} } 
    else { $done.=$block };
    $command="";
    @arg=();
};

sub do_end {
    if ($env eq $mand[0]) {
	if ($direct) {
	    while ($#outhandle > 0 ) { 
		&pop_output 
		};
	};
    } else {
	die "\nmakesegments: Block end doesn't match:\n".
	    "END: \"\\end\{$mand[0]\}\", expected: \"\\end\{$env\}\"\n";
    };
    $foundend=1;
};

sub do_segment_cmd {
    while ($#outhandle > 0) { 
	&pop_output;
    };
# protect commands in section heading
# needed for the \segment command of html.sty
    $segname++;
    $mand[0] =~ s/$no_escape_re$ord_command_re/"$1$2".&protect($3)/ge;
    $done.="\\segment$star".'{'.$segname."\}\{$command\}\{$mand[0]\}\n";
    $direct=&push_output("$DIR/$segname.tmp");
    $cur_seg=$segname;
#    print STDERR "Starting segment: $segname\n";
    $segment_names{$cur_seg}=$command;
#    print STDERR join (", ",keys %segment_names)."\n";
    ($segment_titles{$cur_seg}=$mand[0]) =~ s/[\n\t]//g;
    1 while ($segment_titles{$cur_seg} =~
	     s/$no_escape_re$ord_command_re(\s*\[[^\]]*\])*(\s*\{[^}]*\})*/$1$2/g);
    $command="";
    @arg=();
};

sub protect {
    local ($_)=@_;
    $_="\\protect$_" unless ($_ eq "\\protect");
    $_;
};    

sub do_nosegment_cmd {
    while ($#outhandle > 0) { 
	$direct="";
	&pop_output;
    };
    $special_sections{$command}="";
    if ($command eq "bibliography") {
	my $file,$key;
	foreach $key (split(',',$mand[0])) {
	    $file=&find_texinput($key,\@bibinputs,[".bib"]);
	    push @bibfiles, ($file) unless $file =~ m:^(/|~):;
	};
    };
    $cur_seg=$SEGSTART;
    if ($SPECIALS && (defined $SPECIALNAMES{$command})) {
	open (SPECIAL,">$DIR/$SPECIALNAMES{$command}.tmp");
	print SPECIAL "\n\\$command".join("",@arg)."\n";
	close SPECIAL;
	push @specialsegments, ("$SPECIALNAMES{$command}");
	$command=join("\n","begin{latexonly}",
#		      "\\DumpCounters\{$SPECIALNAMES{$command}\}\{section\}\{\}",
		      "  \\$command".join('',@arg),
		      "\\end{latexonly}");
	@arg=();
    };
};    

sub do_label_cmd {
    push @{$cur_seg."_labels"},($mand[0]);
};

sub do_index_cmd {
    $indexsegs{$cur_seg}="";
};

sub do_ref_cmd {
    push @{$cur_seg."_refs"},($mand[0]) unless 
	($cmd=grep {/^$mand[0]$/} @{$cur_seg."_refs"});
};

sub do_htmlref {
#    print STDERR "Htmlref: ".join(',',@mand)."\n";
    push @{$cur_seg."_refs"},($mand[1]) unless 
	($cmd=grep {/^$mand[1]$/} @{$cur_seg."_refs"});
};

sub do_hyperref {
#    print STDERR "Hyperref: ".join(',',@mand)."\n";
    push @{$cur_seg."_refs"},($mand[3]) unless 
	($cmd=grep {/^$mand[3]$/} @{$cur_seg."_refs"});
};

sub do_bibliographystyle {
    my $file=&find_texinput($mand[0],[(@bstinputs,@texinputs)],[".bst"]);
    push @files_to_copy, ($file) unless $file =~ m:^(/|~):;
};

sub do_endinput {
    &pop_input if ($#inhandle > 0);
    $command="";
};

sub do_input {
# Allow argument in braces or simple (TeX-like) argument
    s/\s*\{\s*([^\}\s]+)\s*\}// || s/\s*([^\s\[\]\{\}]+)//;
# Args are read in directly to allow for tex-style \input myfile
    my $file=$1;
    $file = &find_texinput ($file,\@texinputs,["",".tex"]);
    if (!$IGNOREINPUTS) { 
	&push_input ($file) if $file;
	$command="";
	@arg=();
    } else {
	push @files_to_copy, ($file) unless $file=~ m:^(/|~):;
	@arg=("\{$file\}");
    };
};

sub do_include {
# Args are read in directly to allow for tex-style \input myfile
    my $file = &find_texinput($mand[0],\@texinputs,["",".tex"]);
    if (!$IGNOREINPUTS) {
	&push_input ($file) if $file;
	$command="";
	@arg=();
    } else {
	push @files_to_copy, ($file) unless $file=~ m:^(/|~):;
    };
};

sub do_includegraphics {
    if ((defined $packages{"graphics"}) || (defined $packages{"graphicx"})) {
	my $file=&find_texinput($mand[0],\@graphicsinputs,\@graphicsextensions);
	push @files_to_copy, ($file) unless (!$file or $file=~ m:^(/|~):);
    };
};

sub do_epsfig {
    if (defined $packages{"epsfig"}) {
	$mand[0]=~/file=(.*?)($|,)/;
	my $file=$1;
#	print STDERR "epsfig:\$file=$file\n";
	$file =~ s/^\s*|\s*$//g;
	$file=&find_texinput($file,\@graphicsinputs,\@graphicsextensions);
	push @files_to_copy, ($file) unless (!$file or $file=~ m:^(/|~):);
    };
};

sub do_segment {
# Encoutered an already existing segment.
#    print STDERR "processing segment file \"$mand[0]\"...$mand[1], $mand[2]\n";
    my $file,$base;
    $file = &find_texinput($mand[0],\@texinputs,["",".tex"]);
    if (!$INGNOREINPUTS) {
	($base = $file) =~ s/[.]tex$//;
	unless (open (TMPIN,"<$file")) {
	    die "Couldnt open $file for input!\n" };
	unless (open (TMPOUT,">$base\_msg.tex")) {
	    die "Couldnt open $base_msg.tex for output!\n" };
	unshift @temporary_files,("$base\_msg.tex");
	my $line;
	my $startfound=0;
	my $comment;
# Search for the \startdocument command
	while ($line=<TMPIN>) {
	    ($line,$comment)=&strip_comment($line);
	    if ($line =~ s/$no_escape_re\\startdocument(\W)//) {
		$startfound=1;
		$line="$3$'comment";
		last;
	    };
	};
	if ($startfound) {
	    print TMPOUT $line;
	    while ($line=<TMPIN>) {
		print TMPOUT $line;
	    };
# Pretend a \section ... \input sequence was found in the text
	    $_=join(" ","\\$mand[1]$star\{$mand[2]\}",
		    "\\input\{$base\_msg.tex}",$_);
	} else {
	    print STDERR "WARNING: No \\startdocument found in segment $file!\n";
	};
	close TMPIN;
	close TMPOUT;
	$command="";
	@arg=();
    } else {
	push @files_to_copy, ($file) unless $file=~ m:^(/|~):;
    };
};

sub do_title {
    ($maintitle=$mand[0]) =~ s/\n|\t//g;
    1 while ($maintitle =~ s/$no_escape_re$ord_command_re(\s*\[[^\]]*\])*\s*(\{[^}]*\})*/$1$2/g);
};

sub do_usepackage {
    my $file;
    if ($opt[0]) {
	if ($CHECK_LATEX_STYLES) {
	    if (!($file=&find_texstyle("$mand[0].sty"))) {
		print STDERR "WARNING: style file of package $mand[0] not found - ignored !\n";
		$command=""; 
		@arg=();
	    } else {
		push @files_to_copy, ($file) unless $file =~ m:^(/|~):;
		$packages{$mand[0]}=$opt[0];
	    };
	} else {
	    $packages{$mand[0]}=$opt[0];
        };
    } else {
	my $pack;
	    my @packs=split(',',$mand[0]);
	foreach $pack (@packs) {
	    if ($CHECK_LATEX_STYLES) {
		if (!($file=&find_texstyle("$pack.sty"))) {
		    print STDERR "WARNING: style file of package $pack not found - ignored !\n";
		    @packs=grep {!(/$pack/)} @packs;
		} else {
		    $packages{$pack}="";
		    push @files_to_copy,($file) unless $file=~ m:^(/|~):;
		};
	    } else { $packages{$pack}=""; };
	    if ($#packs > -1) { 
		@arg=("\{".join(',',@packs)."\}");
	    } else {
		@arg=();
		$command=""
	    };
        };
    };
};

sub do_documentclass {
    my $file;
    if (!$CHECK_LATEX_STYLES || ($file=&find_texstyle("$mand[0].cls"))) {
	$class=$mand[0];
	$global_options=$opt[0];
	$_="$use_html_mark$_";
	push @files_to_copy, ($file) unless $file =~ m:^(/|~):;
    } else {
	die "Fatal: document class file $mand[0].cls not found";
    };
};	      

sub do_internal {
    $command="";
    @arg=();
};



sub process_preamble {
    local ($_)=@_;
    my ($args,$html,$dir);
# insert a \usepackage{html} line if it's not yet there
    print STDERR "Document class: $class, global options: $global_options\n";
    print STDERR "packages found:\n";
    foreach $args (keys %packages) {
        print STDERR "$args ".($packages{$args} ? "(options: ".
	    $packages{$args}.").. " : ".. ");
        foreach $dir (@l2hinputs) {
            if (-f "$dir/$args.perl") {
		${$args."_supported"}=1 ;
	        print STDERR "(supported!) .. ";
	    };
        };
    };
    print STDERR "\n";
    $html=(defined $packages{"html"});
    s/$use_html_mark/($html ? "" : "\n\\usepackage{html}") /e;
    if (!$html) {
	$packages{"html"}="";
        print STDERR "Adding package html ...\n";
    };
    $_;
}

sub strip_comment {
    local ($_)=@_;
    my ($comment);
    if (s/(^|[^\\])(\\\\)*(%.*)//) {
	$comment=$3;
	$_.="$1$2" ;
    } else { $comment="" };
    ($_,$comment);
}

sub get_following {
    local ($_)=$@;
    my ($found)=0;
    my ($comment,$done,$arg,$command,$before,$block,$after);
    while (!$found) {
	($_,$comment)=&strip_comment($_);
      CASE: {
	  s/^\s$// && do {
# Empty line
	      $done.="$&$comment\n";
	      $comment="";
	      $_=&get_next_line;
	      last CASE;
	  };
	  s/^\s*$end_block_re//o && do {
	      $found=1;
	      return ($found,$done,$1,"$'$comment");
	  };
	  s/^\s*$end_re//o && do {
	      $found=1;
	      $arg=$1;
	      ($before,$block,$after)=&get_simple_argument("$'$comment");
	      if ($block) {
		  $done.=$before;
		  $arg.=$block;
		  return ($found,$done,$arg,$after);
	      } else { die "\nCorrupted \\end statement: \"$arg$before$block$after\"\n" };
	  };
	  s/^\s*$begin_block_re//o && do {
	      $found=2;
	      return ($found,$done,$1,"$'$comment");
	  };
	  s/^\s*$end_re//o && do {
	      $found=2;
	      $arg=$1;
	      ($before,$block,$after)=&get_simple_argument("$'$comment");
	      if ($block) {
		  $done.=$before;
		  $arg.=$block;
		  return ($found,$done,$arg,$after);
	      } else { die "\nCorrupted \\begin statement: \"$arg$before$block$after\"\n" };
	  };
# \begin{...} and \end{...} already excluded
	  s/^\s*$ord_command_re//o && do {
	      $command=$1;
	      $after=$';
# swallow \verb?...?
	      if ("$command$after$comment" =~ /^(\\verb[*]?)(.)/) {
		  # it's a \verb command: read \verb block and continue
		  $command=$&;
		  ($block,$after)=&process_verb ($2,$');
		  $done.="$command$block";
		  $_=$after;
		  last CASE;
	      } else {
		  $found=3;
		  return ($found,$done,$command,"$after$comment");
	      };
	  };
	  s/^\s*$command_re//o && do {
	      $found=4;
	      return ($found,$done,$1,"$'$comment");
	  };
# Normal text
	  return (5,$done,"","$_$comment");
      };
    };
};      
		
	
sub find_end_of_opt {
    local ($_)=@_;
    chomp;
    if (!(s/^\s*\[// )) { return ('',"$&$_\n") };
    my ($before)=$&;
    my ($text)="";
    my ($found)=0;
    my ($comment)="";
    while (!$found) {
	if (s/(^|[^\\])(\\\\)*(%.*)//) { 
	    $_.="$1$2";
	    $comment=$3 };
	if (s/(^|.*?[^\\])(\\\\)*([\[\]])//) {
	    $text=$&;
	    if ($3 =~ /\]/) { $before.=$text; $found=1; }
	    else { 
		$before.=$text;
		$before =~ s/[\[\]]$//;
		my ($block,$afterblock)=&find_end_of_opt("\{$_$comment\n");
		$comment="";
		print STDERR "subblock:\n$block\n";
		$before .= $block;
		$_=$afterblock;
		next 
		}
	} else {
	    $before.="$_$comment\n";
	    $comment="";
	    if (eof) { die "\nmakesegment: Reached eof before end of optional !\n" };
	    $_=<$input>;
	    chomp;
	};
    };
    ($before,$_.$comment)
}
	
sub process_verb {
    local ($_)=@_;
    my ($mark)=substr($_,0,1);
    my ($verbtext,$rest)=($mark,"");
    if ($mark =~ /[\\\]\[\{\}\^\|\(\)]/) { $mark="\\$mark"; };
#    print STDERR "mark: $mark\n";
    $_ =~ s/^[$mark]//;
    if (!$mark) { die "\nmakesegments: No valid \\verb delimiter found!\n" };
    my ($found)=0;
    unless (s/^[^$mark]*[$mark]//) { 
	s/^[^$mark]*$//; 
	print STDERR "\\verb ended by end of line: $verbtext$&\n"; 
    };
    $verbtext.=$&;
    $rest=$';
#    while (!$found) {
#	if (/[$mark]/) {
#	    $found=1;
#	    $verbtext.=$`$&;
#	    $rest=$';
#	    }
#	else {
#	    $verbtext.="$_\n";
#	    $_=&get_next_line;
#	    }
#    };
    ($verbtext,$rest);
}
	    
sub process_verbatim {
    local ($star,$_)=@_;
    my ($verbtext,$rest)=("","");
    my ($found)=0;
    my ($num)=0;
    if ($star) { $star="[$star]" };
    while (!$found) {
	if (/\\end\s*\{\s*verbatim$star\s*\}/) {
	    $found=1;
	    $verbtext.="$`$&";
	    $rest="$'";
	}
	else {
	    $verbtext.="$_\n";
	    $_=&get_next_line;
	}
    };
    ($verbtext,$rest);
}

sub push_output {
    my ($name)=@_;
    push @outhandle,(select);
#    print STDERR "outhandle: ".join(',',@outhandle)."\n";
    $output++;
    unless (open ($output,">$name")) { die "Can't open file $name for output:\n$!\n" };
#    print STDERR "opening $name, Handle=$output\n";
    select $output;
    $output;
};
    
sub push_input {
    my ($name)=@_;
    $input++;
    unless (open ($input,"<$name")) { die "Can't open file $name for input:\n$!\n" };
    print STDERR "processing file $name ...\n";
    unshift @inhandle,($input);
    $input;
};

sub pop_input {
    my ($current)= shift @inhandle;
    $input=$inhandle[0];
    close $current;
    $input;
};

sub pop_output {
    my ($new)=pop @outhandle;
#    print STDERR "outhandle: ".join(',',@outhandle)."\n";
    my ($current)=select;
#    print STDERR "Closed $current, selected $new\n";
    close $current;
    select $new;
};

sub make_known_cmds {    
    my $key;
    %known_commands= (
		      %segments,
		      %nosegment_cmds,
		      %label_cmds,
		      %ref_cmds,
		      %index_cmds,
		      %misc_cmds);
#    print STDERR "Known commands:\n";
#    foreach $key (keys %known_commands) {
#	print "$key => ",join(',',@{$known_commands{$key}})."\n";
#    };
#    print STDERR join(", ",(keys %known_commands))."\n";
};

sub dependencies {

    foreach $key (keys %segment_names) {
	if (defined @{$key."_labels"}) {
	    map { $labelsegs{$_} = $key } @{$key."_labels"};
	};
    };
    
    foreach $key (keys %segment_names) {
	$internal{$key}="\\internal\{\}\n" ;
	if (defined @{$key."_refs"}) {
	    map { $internal{$key}.="\\internal\{$labelsegs{$_}\}\n" 
		      unless ($labelsegs{$_} =~/$key|$SEGSTART/) } 
	    @{$key."_refs"};
        };
        foreach $k (@specialsegments) {
	    $internal{$key}.="\\internal\{$k\}\n" ;
        };
    };

    $internal{$outname}="";

    delete $segment_names{$SEGSTART};

    foreach $k (@specialsegments) {
	$internal{$k}="\\internal\{\}\n";
	foreach $key ((keys %segment_names),@specialsegments) {
	    $internal{$k}.="\\internal\{$key\}\n";
	};
    };

    foreach $key ((keys %segment_names),@specialsegments) {
	$internal{$outname}.="\\internal\{$key\}\n";
    };

    if (defined $special_sections{"printindex"}) {
	if ($SPECIALS && (defined $SPECIALNAMES{"printindex"})) {
	    foreach $key ("",keys %segment_names) {
		$internal{$SPECIALNAMES{"printindex"}}.=
		    "\\internal\[index\]\{$key\}\n";
	    };
	    if (defined $special_sections{"bibliography"}&& 
		(defined $SPECIALNAMES{"bibliography"})) {
		foreach $key ("",keys %segment_names) {
		    $internal{$SPECIALNAMES{"bibliography"}}.=
			"\\internal\[index\]\{$key\}\n";
		};
	    };
	    if (defined $special_sections{"thebibliography"}
		&& (defined $SPECIALNAMES{"thebibliography"})) {
		foreach $key ("",keys %segment_names) {
		    $internal{$SPECIALNAMES{"thebibliography"}}.=
			"\\internal\[index\]\{$key\}\n";
		};
	    };
	} else {
	    foreach $key (keys %segment_names) {
		$internal{$outname}.="\\internal\[index\]\{$key\}\n";
	    };
	};
    };

    if (defined $special_sections{"tableofcontents"}) {
	if ($SPECIALS&& (defined $SPECIALNAMES{"tableofcontents"}))  {
	    foreach $key ("",(keys %segment_names), @specialsegments) {
		$internal{$SPECIALNAMES{"tableofcontents"}}.=
		    "\\internal\[contents\]\{$key\}\n".
			"\\internal\[sections\]\{$key\}\n" ;
	    };
	} else {
	    foreach $key (keys %segment_names) {
		$internal{$outname}.="\\internal\[contents\]\{$key\}\n".
		    "\\internal\[sections\]\{$key\}\n";
	    };
	};
    };

    if (defined $special_sections{"listoffigures"}) {
	if ($SPECIALS && (defined $SPECIALNAMES{"listoffigures"})) {
	    foreach $key ("",keys %segment_names) {
		$internal{$SPECIALNAMES{"listoffigures"}}.=
		    "\\internal\[figure\]\{$key\}\n";
	    };
	} else {
	    foreach $key (keys %segment_names) {
		$internal{$outname}.="\\internal\[figure\]\{$key\}\n";
	    };
	};
    };

    if (defined $special_sections{"listoftables"}) {
	if ($SPECIALS && (defined $SPECIALNAMES{"listoffigures"})) {
	    foreach $key ("",keys %segment_names) {
		$internal{$SPECIALNAMES{"listoftables"}}.=
		    "\\internal\[table\]\{$key\}\n";
	    };
	} else {
	    foreach $key (keys %segment_names) {
		$internal{$outname}.="\\internal\[table\]\{$key\}\n";
	    };
	};
    };
    
};

sub write_segments {

    my $seghead;
    ($seghead=$head) =~ s/$begin_htmlonly_mark//g;
    $seghead =~ s/$end_htmlonly_mark//g;
    $head =~ s/$begin_htmlonly_mark/\\begin{htmlonly}/g;
    $head =~ s/$end_htmlonly_mark/\\end{htmlonly}/g;
    foreach $key (keys %segment_names) {
	unless (open (TMPFILE,"$DIR/$key.tmp")) { 
	    die "can't open $DIR/$key.tmp for input!\n" };
	unless (open (CREATE,">$DIR/$key".".tex")) { 
	    die "can't open $DIR/$key.tex for output!\n" };
	print CREATE join("\n",
			  "\\begin\{htmlonly\}",
			  $seghead,
			  "\\input\{".$key.".ptr\}",
			  "\\end\{htmlonly\}",
			  $internal{$key},
			  "\\startdocument");
	while (<TMPFILE>) {
	    print CREATE $_;
	};
	close TMPFILE;
	close CREATE;
    };
    
    foreach $name (@specialsegments) {
#	print "Making $DIR/$name.tex , $internal{$name}\n";
	unless (open (TMPFILE,"$DIR/$name.tmp")) { 
	    die "can't open $DIR/$name.tmp for input!\n" };
	unless (open (CREATE,">$DIR/$name.tex")) { 
	    die "can't open $DIR/$name.tex for output!\n" };
	print CREATE join("\n",
			  "\\begin\{htmlonly\}",
			  $seghead,
#			  "\\input\{".$name.".ptr\}",
			  "\\end\{htmlonly\}",
			  $internal{$name},
			  "\\startdocument");
	while (<TMPFILE>) {
	    print CREATE $_;
	};
	close TMPFILE;
	close CREATE;
    }
    
    unless (open (TMPFILE,"$DIR/$outname.tmp")) { 
	die "can't open $DIR/$outname.tmp for input!\n" };
    unless (open (CREATE,">$DIR/$OUTFILE")) { 
	die "can't open $DIR/$OUTFILE for output!\n" };

    print CREATE join("\n",
		      $head,
		      $internal{$outname});
    while (<TMPFILE>) {
	print CREATE $_;
    };
    
    close TMPFILE;
    close CREATE;

    if (!$DONTCOPY) {
	foreach $file (@bibfiles) {
	    if ($USELINKS) {
		if ($file && (-f $file)) { 
		    `rm -f $DIR/$file; ln -s $PWD$file $DIR/$file`; 
		    print STDERR "Linking $file to $DIR/$file\n"} ;
		$file="";
	    } else {
		if ($file && (-f $file)) { 
		    `cp $file $DIR`; print STDERR "Copying $file to $DIR\n"} 
		else { $file="" };
	    };
	};

	foreach $file (@files_to_copy) {
	    if ($USELINKS) {
		if ($file && (-f $file)) { 
		    `rm -f $DIR/$file; ln -s $PWD$file $DIR/$file`; 
		    print STDERR "Linking $file to $DIR/$file\n"} ;
	    } else {
		if ($file && (-f $file)) { 
		    `cp $file $DIR`; print STDERR "Copying $file to $DIR\n";
		};
	    };
	};
    };

    unless ((unlink map { "$DIR/$_.tmp" } 
	     ($outname,(keys %segment_names),(@specialsegments)))
	    and (!@temporary_files or unlink @temporary_files)) {
	print "\nmakesegments: Warning: couldn't delete temporary files!\n" };
    
};

sub make_makefile {

# Check segment hierarchy

    $indexspecial=($SPECIALS && (defined $special_sections{"printindex"}) 
		   && (defined $SPECIALNAMES{"printindex"}));
    $contentspecial=($SPECIALS && (defined $special_sections{"tableofcontents"})
		     && (defined $SPECIALNAMES{"tableofcontents"}));

    foreach $key (sort (keys %levels)) {
	@{$key."_segs"}=grep { $segment_names{$_} =~ /^$key$/ } (keys %segment_names);
    };

    foreach $key (keys %segment_names) {
	$k=$key;
	@higher= grep { ($levels{$segment_names{$_}} < $levels{$segment_names{$key}} )
			    && ($_ lt $key) } (keys %segment_names);
	$up=($#higher > -1 ? $higher[$#higher]: $outname);
	@higher= grep { ($levels{$segment_names{$_}} <= $levels{$segment_names{$key}} )
			    && ($_ lt $key) } (keys %segment_names);
	$prev=($#higher > -1 ? $higher[$#higher]: $up);
	@next= grep { ($levels{$segment_names{$_}} <= $levels{$segment_names{$key}} )
			  && ($_ gt $key) } (keys %segment_names);
	if ($#next > -1) { $down= $next[0] }
	elsif (defined $segment_names{++$k}) { $down=$k }
	elsif (defined @specialsegments) { 
	    $down=$specialsegments[0];
	    $lastsegment=$key;
	} else { $down=$outname ; $lastsegment=$key};
	($kupc=$key) =~ tr/a-z/A-Z/;
	($uupc=$up)=~ tr/a-z/A-Z/;
	($dupc=$down)=~ tr/a-z/A-Z/;
	($pupc=$prev)=~ tr /a-z/A-Z/;
	$make{$key}=join("\\\n\t\t",
			 "\$(L2H)",
			 "\$(MAKE_COMMON) \$(CONTENTS) \$(INDEX)",
			 "\$(MAKE_CHILDREN)",
			 "-prefix $key -t \$($kupc"."TITLE)",
			 "-up_url $up.html -up_title \$($uupc"."TITLE)",
			 "-prev_url $prev.html -prev_title \$($pupc"."TITLE)",
			 "-down_url $down.html -down_title \$($dupc"."TITLE)",
			 "$key.tex");
    };

    for ($i=0;$i <= $#specialsegments;$i++) {
	$key=$specialsegments[$i];
	$up=$outname;
	if ($i==0) { $prev=$lastsegment } else { $prev=$specialsegments[i-1] };
	if ($i==$#specialsegments) 
	{ $down=$specialsegments[0] } else { $down=$specialsegments[$i+1] };
	($kupc=$key) =~ tr/a-z/A-Z/;
	($uupc=$up)=~ tr/a-z/A-Z/;
	($dupc=$down)=~ tr/a-z/A-Z/;
	($pupc=$prev)=~ tr/a-z/A-Z/;
	$make{$key}=join("\\\n\t\t",
			 "\$(L2H)",
			 "\$(MAKE_COMMON) \$(CONTENTS) \$(INDEX)",
			 "\$(MAKE_CHILDREN)",
			 "-prefix $key -split 0 -link 0",
			 "-t \$($kupc"."TITLE)",
			 "-up_url $up.html -up_title \$($uupc"."TITLE)",
			 "-prev_url $prev.html -prev_title \$($pupc"."TITLE)",
			 "-down_url $down.html -down_title \$($dupc"."TITLE)",
			 "$key.tex");
    };

    ($down=$SEGSTART)++;
    ($dupc=$down)=~ tr/a-z/A-Z/;
    ($kout=$outname) =~ tr/a-z/A-Z/;
    ($pupc=$lastsegment) =~ tr/a-z/A-Z/;
    $make{$outname}=join("\\\n\t\t",
			 "\$(L2H)",
			 "\$(MAKE_COMMON) \$(CONTENTS) \$(INDEX)",
			 "\$(MAKE_TOP) -t \$($kout"."TITLE)",
			 "-prev_url $lastsegment.html -prev_title \$($pupc"."TITLE)",
			 "-down_url $down.html -down_title \$($dupc"."TITLE)",
			 "$outname.tex");
    
    print STDERR "Generating Makefile (edit for your own needs afterwards ...)\n";
    
    unless (open (MAKE,">$DIR/Makefile")) { die "Can't create Makefile in $DIR!\n$!\n" };
    
    print MAKE join("\n",
		    "#",
		    "# Makefile for segmented L2H document $OUTFILE",
		    "# Generated by makesegments",
		    "#",
		    "# COMMANDS:",
		    "#",
		    "LATEX\t\t= $LATEX",
		    "DVIPS\t\t= $DVIPS",
		    "BIBTEX\t\t= $BIBTEX",
		    "MAKEINDEX\t\t= $MAKEINDEX",
		    "L2H\t\t= $L2H",
		    "MAKE\t\t= $MAKE",
		    "TOUCH\t\t= $TOUCH",
		    "#",
		    "# HTML TITLES: ",
		    "#",
		    "# Edit the XYTITLE variables to change HTML titles",
		    "#",
		    "");
    
    print MAKE "$kout"."TITLE\t\t= \"".($maintitle ? $maintitle : "Main document")."\"\n";
    foreach $key (keys %segment_names) {
	($kupc=$key) =~ tr/a-z/A-Z/;
	print MAKE "$kupc"."TITLE\t\t= \"$segment_titles{$key}\"\n";
    };
    foreach $key (keys %special_sections) {
	($kupc=$SPECIALNAMES{$key}) =~ tr/a-z/A-Z/;
	print MAKE "$kupc"."TITLE\t\t= \"$SPECIALTITLES{$key}\"\n" if $kupc;
    };
    
    print MAKE join("\n",
		    "#",
		    "# FURTHER DEFINITIONS:",
		    "#",
		    "TEXFILES\t\t= ".join(' ',(map {$_.".tex"} 
					       (keys %segment_names, @specialsegments))),
		    "SEGMENTS\t\t= ".join(' ',(map {"$outname/$_".".html"} 
					       (keys %segment_names, @specialsegments))),
		    "INT\t\t= internals.pl\n",
		    "");
    
    print MAKE join("\n",
		    "#",
		    "# Latex2HTML command lines for each segment:",
		    "#",
		    "# Set INDEX to \"-index XXXX.html\" and ",
		    "#     CONTENTS to \"-contents YYYY.html\" for",
		    "# correct links to contents and index page - ",
		    "# Or set \$SPECIALS=1 in your Makesegments config file",
		    "#",
		    "MAKE_COMMON\t\t= -dir $outname $MAKE_COMMON",
		    "MAKE_TOP\t\t= $MAKE_TOP",
		    "MAKE_CHILDREN\t\t= -external_file $outname $MAKE_CHILDREN",
		    "CONTENTS\t\t=".
		    ($contentspecial ? " -contents ". 
		     $SPECIALNAMES{"tableofcontents"}.".html":""),
		    "INDEX\t\t=".
		    ($indexspecial ? " -index ".$SPECIALNAMES{"printindex"}.".html":""),
		    "",
		    "L2H$kout\t\t=$make{$outname}",
		    "");
    
    foreach $key (keys %segment_names) {
	($kupc=$key) =~ tr/a-z/A-Z/;
	print MAKE "L2H$kupc\t\t= $make{$key}\n";
    };

    foreach $key (@specialsegments) {
	($kupc=$key) =~ tr/a-z/A-Z/;
	print MAKE "L2H$kupc\t\t= $make{$key}\n";
    };    

    print MAKE join ("\n",
		     "html:\t$outname/$outname.html \$(SEGMENTS)",
		     "",
		     "all:\t$outname.ps html",
		     "",
		     "$outname.ps:\t$outname.dvi",
		     "\t\$(DVIPS) -o \$\@ $outname",
		     "",
		     "$outname.dvi:\t$outname.aux",
		     "\t\$(LATEX) $outname",
		     "",
		     "$outname.aux:\t$outname.stamp ".
		     (defined $special_sections{"bibliography"} ? "$outname.bbl " : "").
		     (defined $special_sections{"printindex"}   ? "$outname.ind " : ""),
		     "\t\$(LATEX) $outname",
		     "",
		     "$outname.stamp:\t$outname.tex \$(TEXFILES)",
		     "\t\$(LATEX) $outname",
		     "\t\$(TOUCH) \$\@",
		     "",
		     (defined $special_sections{"bibliography"} ? 
		      "$outname.bbl:\t$outname.stamp ".
		      join(' ', (map { (m:.*/: ? $& : $_) } @bibfiles)).
		      "\n\t\$(BIBTEX) $outname\n" : ""),
		     "",
		     (defined $special_sections{"printindex"} ? 
		      "$outname.ind:\t$outname.stamp $outname.idx".
		      "\n\t\$(MAKEINDEX) $outname.idx\n\n".
		      "$outname.idx:\t$outname.stamp" : ""),
		     "",
		     "$outname/$outname.html:\t".
		     join(" ",
			  (map { ($internal{$outname} =~ /\{$_\}/ ? "$outname/$_".".stamp" : "") } 
			   ((keys %segment_names),@specialsegments))),
		     "\t\$(L2H$kout)",
		     "",
		     "$outname/$outname.stamp:\t$outname.aux",
		     "\t\$(L2H$kout)",
		     "\t\$(TOUCH) \$\@",
		     "","");
    
    foreach $key (@specialsegments) {
	($kupc=$key) =~ tr/a-z/A-Z/;
	print MAKE join ("\n",
			 "$outname/$key.html:\t".
			 join(" ",
			      (map { ($internal{$key} =~ /\{$_\}/ ? "$outname/$_".".stamp" : "") } 
			       ((keys %segment_names),@specialsegments))),
			 "\t\$(L2H$kupc)",
			 "",
			 "$outname/$key.stamp:\t$outname.aux",
			 "\t\$(L2H$kupc)",
			 "\t\$(TOUCH) \$\@",
			 "","");
    };
    
    foreach $key (keys %segment_names) {
	($kupc=$key) =~ tr/a-z/A-Z/;
	print MAKE join ("\n",
			 "$outname/$key.html:\t".
			 join(" ",
			      (map { ($internal{$key} =~ /\{$_\}/ ? "$outname/$_".".stamp" : "") } 
			       ((keys %segment_names),@specialsegments))),
			 "\t\$(L2H$kupc)",
			 "",
			 "$outname/$key.stamp:\t$outname.aux",
			 "\t\$(L2H$kupc)",
			 "\t\$(TOUCH) \$\@",
			 "","");
    };
    
    print MAKE join ("\n",
		     "clean:\t",
		     "\trm -rf $outname \\",
		     "\t".
		     join(' ',
			  map { $outname.$_ } 
			  (".ps",".dvi",".aux",".toc",".lof",".lot",".bbl",".idx",".ind",".stamp")
			  )." \\",
		     "\t".join(' ',
			       map { $_.".ptr" } (keys %segment_names))."\\",
		     "\t".join(' ',
			       map { $_.".stamp" } (keys %segment_names)),
		     "");
    
    close MAKE;
};

sub find_texinput {
# parameters: filename, array reference for input dirs, 
# array reference for possible extensions
    my ($file,$inputs,$extensions) = @_;
#    print STDERR "Looking for $file in ".
#	join (" and ",@$inputs).", extensions: ".join (" and ",@$extensions)."\n";
    my $basedir,$dir,$found,$dirtext,$match,$ex;
    $ext="";
    $found="";
    ($file =~ s/([.]\w+)$//) && do { $ext=$1 };
# Absolute pathname ?
    my $abs= ($file =~ m:^/|^~:);
# filename is absolute 
    if ($abs) { 
	if ($ext) { 
	    (-f "$file$ext") && ($found="$file$ext") ;
	} else {
	    foreach $ex (@$extensions) {
		$found || ((-f "$file$ex") && ($found="$file$ex"));
	    };
	};
    } else {
	foreach $basedir (@$inputs) {
	    $found =&search_tree ($basedir,$file,($ext ? $ext : @$extensions));
	    last if $found;
	};
    };
    !$found && print STDERR "WARNING: Input file $file not found!\n";
    $ext && ($ext =~ /^.sty$|^.clo$|^.cls/) && do {
	print STDERR "WARNING: Attempt to input style file $file$ext with \\input or \\include!\n";
	$found="";
    };
    return $found;
};

sub find_texstyle {
    my ($file) = @_;
    my $basedir,$dir,$found,$dirtext;
    $ext="";
    $found="";
    ($file =~ s/([.]\w+)$//) && do { $ext=$1 };
# Absolute pathname ?
    my $abs= ($file =~ m:^/|^~:);
# filename is absolute 
    if ($abs) { 
	((-f $file) && ($found=$file)) || ((-f "$file.tex") && ($found="$file.tex"));
    } else {
# strip directories
	$file =~ s:.*/::;
	(print STDERR "WARNING: Invalid input/inlude filename: $&\n", return "") unless $file;
	foreach $basedir (@texinputs) {
	    $found =&search_tree ($basedir,$file,($ext ? $ext : ("",".tex")));
	    last if $found;
	};
    };
    !$found && print STDERR "WARNING: Input file $file not found!\n";
    return $found;
};

sub search_tree {
    local($_,$file,@exts)=@_;
    my ($found,$dir);
    my @subdirs,$filelist;
    my @files;
#    print STDERR "Looking for $file in $_, extensions: ".join(", ",@exts)." ...\n";
    if (m://:) {
# dirname contains double slash
	my $base=$`;
	my $sub=$';
	if ($sub && $sub =~ s:/.*::) {
	    my $rest=$&;
	    @subdirs=split("\n",
			   `find $base -follow -name $sub -type d -print`);
	    foreach $dir (@subdirs) {
		if ($found=&search_tree("$dir$rest",$file,@exts)) { return $found };
	    };
	} else {
	    $filelist=join(" -o ",map { "-name $file$_" } @exts);
	    @files=split("\n",
			 `find $base -follow -type f \\( $filelist \\) -print`);
	    if ($#files > 0) {
		print STDERR "WARNING: multiple files matching $file found in $base!\n";
		return $files[0];
	    } elsif ($#files == 0) { return $files[0] };
	};
    } else {
	my $base=$_;
	$base.="/" unless ($base=~m:/$:);
	@files=grep { -f "$base$file$_" } @exts;
	if ($#files > 0) {
	    print STDERR "WARNING: multiple files matching $file found in $base!\n";
	    return "$file$files[0]";
	} elsif ($#files == 0) { return "$file$files[0]" };
    };
    return "";
};
    
sub init { 
    local @_=@ARGV;
# openers for *o*ptional and *m*andatory arguments
    ($o,$m)=("\\[","\\{");
    $usage_string=join("\n",
		       "Makesegments - create segmented documents for LaTeX2HTML.","",
		       "Usage:",
		       "   makesegments [options] LaTeX-file\[.tex\]","",
		       "Options:",
		       "  -level level: specify level of sectioning commands down to which",
		       "                segmentation is carried out (default section)",
		       "                (short: -l level)",
		       "  -dir dir: specify target directory (default ./segmented)",
		       "            (short: -d dir)",
		       "  -output outputfile: specify the name of the master file for output",
		       "                      (short: -o outputfile)",
		       "  -config config-file: specify name of makesegments\'s configuration file",
		       "                       (default ./.makesegments.cnf, \$HOME/.makesegments.cnf)",
		       "                       (short: -c config-file)",
		       "  -zero string: basename of zeroeth segment (default a0)",
		       "                if you specify \"-zero SEG000\", segment names will be",
		       "                \"SEG001.tex\", \"SEG002.tex\",...",
		       "                (short: -z string)",
		       "  -no_makefile: Don\'t generate the Makefile (short: -n)",
		       "  -check_latex_styles: Check if requested LaTeX packages are accessible",
		       "                       (requires proper setting of TEXINPUTS)",
		       "                       (short: -s)",
		       "  -ignore_inputs: Don\'t replace \\input and \\include statements by the",
		       "                  contents of input files (short: -i)",
		       "  -use_links: Use soft links for input files in the target directory",
		       "              instead of copying them (short: -u)",
		       "  -dont_copy: Don\'t copy or link input files from current in the target",
		       "              directory (short: -y)",
		       "  -specialsegments: Create special \"segments\" for Table of contents,",
		       "                    index, bibliography etc. (short: -e)",
		       "  -help: Print this message (short: -h or -?)","",
		       "See the documentation in makesegments.tex for further details.");

# Parse options
    while ($_=shift) {
      OPTIONS: {
	  /^-l$|^-level$/ && do { $O_LEVEL=shift; last OPTIONS };
	  /^-d$|^-dir$/ && do { $O_DIR=shift; last OPTIONS };
	  /^-o$|^-output$/ && do { $O_OUTFILE=shift; last OPTIONS };
	  /^-c$|^-config$/ && do { $CNF_FILE=shift; last OPTIONS };
	  /^-z$|^-zero$/ && do { $O_SEGSTART=shift; last OPTIONS };
	  /^-h$|^-?$|^-help$/ && do { print STDERR $usage_string; exit 0 };
	  /^-s$|^-check_latex_styles$/ && do { $O_CHECK_LATEX_STYLES=1; last OPTIONS };
	  /^-n$|^-no_makefile$/ && do { $O_NOMAKE=1; last OPTIONS };
	  /^-i$|^-ignore_inputs$/ && do { $O_IGNOREINPUTS=1; last OPTIONS };
	  /^-e$|^-specialsegments$/ && do { $O_SPECIALS=1; last OPTIONS };
	  /^-u$|^-use_links$/ && do { $O_USELINKS=1; last OPTIONS };
	  /^-y$|^-dont_copy$/&& do { $O_DONTCOPY=1; last OPTIONS };
	  /^-/ && die "$usage_string\nmakesegments: unknown option $_!\n";
	  $FILE=$_;
	  };
    };
    
# $CNF_FILE overrides ./.makesegments.cnf which overrides $HOME/.makesegments.cnf
    if (-f ($cnf=$ENV{'HOME'}."/.makesegments.cnf")) {
	unless (require $cnf) { print "WARNING: couldn't execute $cnf!\n" };
    };
    
    if (-f ($cnf="./.makesegments.cnf")) {
	unless (require $cnf) { print "WARNING: couldn't execute $cnf!\n" }; 
    };
	    
    if (defined $CNF_FILE) {
	unless (require $CNF_FILE) { 
	    die "makesegments:\nCan't open configuration file $CNF_FILE!\n" };
    };
};

