{
  "schema_version": "1.6.1",
  "id": "RPI-CVE-2026-98563",
  "modified": "2026-10-19T04:30:01Z",
  "upstream": [
    "CVE-2026-98563"
  ],
  "published": "2026-10-18T15:22:13Z",
  "summary": "net: phylink: record the PHY only once bringup cannot fail",
  "details": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet: phylink: record the PHY only once bringup cannot fail\n\nphylink_bringup_phy() stores the PHY in pl->phydev before its last\nfallible step: on a MAC whose phylink ops implement LPI,\nphy_eee_rx_clock_stop() can fail with a real MDIO error. The callers\nunwind with phy_detach(), which knows nothing about pl->phydev, so a\npointer to a PHY that is no longer attached outlives the failed\nconnect.\n\nWhat that costs depends on how the caller got here.\nphylink_connect_phy() goes through phylink_attach_phy(), which refuses\nto attach while pl->phydev is set, turning a transient MDIO error into\na permanent -EBUSY. The SFP path is worse than that: sfp_sm_probe_phy()\nanswers the failure with phy_device_remove() and phy_device_free(), and\nit assigns sfp->mod_phy only past that error return, so nothing clears\npl->phydev and it is left pointing at a freed phy_device that\nphylink_resolve() and the ethtool helpers go on reading.\nphylink_fwnode_phy_connect() has no such check, so a later connect\noverwrites the stale pointer and hides the problem. A disconnect does\nnot: phylink_disconnect_phy() hands that pointer to phy_disconnect(),\nand the second phy_detach() on the same PHY drops references the first\none already released.\n\nFound while making a DSA port survive a PHY whose driver arrives after\nthe switch probes: keeping the port across a failed connect and\nretrying is what makes this window reachable.\n\nPublish the pointer after the last call that can fail instead of\nunwinding it afterwards. Nothing between the two points reads\npl->phydev, and the registration that follows cannot fail:\nphy_request_interrupt() falls back to polling on its own. The PHY-side\nstate keeps the order it had, so no MDIO operation moves relative to\nanother.",
  "affected": [
    {
      "package": {
        "ecosystem": "Raspberry Pi OS:13",
        "name": "linux"
      },
      "versions": [
        "1:6.18.29-1+rpt1",
        "1:6.18.33-1+rpt1",
        "1:6.18.34-1+rpt1",
        "1:6.18.39-1+rpt1",
        "1:6.18.50-1+rpt1"
      ],
      "ecosystem_specific": {
        "binaries": [
          {
            "binary_name": "linux-image-6.18.29+rpt-rpi-2712",
            "binary_version": "1:6.18.29-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.29+rpt-rpi-v6",
            "binary_version": "1:6.18.29-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.29+rpt-rpi-v7",
            "binary_version": "1:6.18.29-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.29+rpt-rpi-v8",
            "binary_version": "1:6.18.29-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.29+rpt-rpi-v8-rt",
            "binary_version": "1:6.18.29-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.33+rpt-rpi-2712",
            "binary_version": "1:6.18.33-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.33+rpt-rpi-v6",
            "binary_version": "1:6.18.33-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.33+rpt-rpi-v7",
            "binary_version": "1:6.18.33-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.33+rpt-rpi-v8",
            "binary_version": "1:6.18.33-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.33+rpt-rpi-v8-rt",
            "binary_version": "1:6.18.33-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.34+rpt-rpi-2712",
            "binary_version": "1:6.18.34-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.34+rpt-rpi-v6",
            "binary_version": "1:6.18.34-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.34+rpt-rpi-v7",
            "binary_version": "1:6.18.34-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.34+rpt-rpi-v8",
            "binary_version": "1:6.18.34-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.34+rpt-rpi-v8-rt",
            "binary_version": "1:6.18.34-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.39+rpt-rpi-2712",
            "binary_version": "1:6.18.39-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.39+rpt-rpi-v6",
            "binary_version": "1:6.18.39-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.39+rpt-rpi-v7",
            "binary_version": "1:6.18.39-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.39+rpt-rpi-v8",
            "binary_version": "1:6.18.39-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.39+rpt-rpi-v8-rt",
            "binary_version": "1:6.18.39-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.50+rpt-rpi-2712",
            "binary_version": "1:6.18.50-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.50+rpt-rpi-v6",
            "binary_version": "1:6.18.50-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.50+rpt-rpi-v7",
            "binary_version": "1:6.18.50-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.50+rpt-rpi-v8",
            "binary_version": "1:6.18.50-1+rpt1"
          },
          {
            "binary_name": "linux-image-6.18.50+rpt-rpi-v8-rt",
            "binary_version": "1:6.18.50-1+rpt1"
          }
        ]
      },
      "database_specific": {
        "per_version": {
          "1:6.18.29-1+rpt1": {
            "linux_commit": "66318c5b5cd8145a662303af12ed39ac07eb27cc",
            "upstream_version": "6.18.29",
            "assessment": "commit ancestry (strak rule)",
            "upstream_fixed": "6.18.55"
          },
          "1:6.18.33-1+rpt1": {
            "linux_commit": "95b85bebbedcaedfa7ca79116ed38b7376fba412",
            "upstream_version": "6.18.33",
            "assessment": "commit ancestry (strak rule)",
            "upstream_fixed": "6.18.55"
          },
          "1:6.18.34-1+rpt1": {
            "linux_commit": "c8c7494100e99ee05b11aaa4f0588a223a63d1af",
            "upstream_version": "6.18.34",
            "assessment": "commit ancestry (strak rule)",
            "upstream_fixed": "6.18.55"
          },
          "1:6.18.39-1+rpt1": {
            "linux_commit": "60ea684a8ace97bb0db1a16e20753bdd6ab371ff",
            "upstream_version": "6.18.39",
            "assessment": "commit ancestry (strak rule)",
            "upstream_fixed": "6.18.55"
          },
          "1:6.18.50-1+rpt1": {
            "linux_commit": "cff533aec2fa601846766b32ff57204e0a61bed7",
            "upstream_version": "6.18.50",
            "assessment": "commit ancestry (strak rule)",
            "upstream_fixed": "6.18.55"
          }
        }
      }
    }
  ],
  "references": [
    {
      "type": "ADVISORY",
      "url": "https://www.cve.org/CVERecord?id=CVE-2026-98563"
    },
    {
      "type": "FIX",
      "url": "https://git.kernel.org/stable/c/4e7a4af364c2048bafb213bf0ef4a89dcbe1bfd4"
    },
    {
      "type": "FIX",
      "url": "https://git.kernel.org/stable/c/671a68654a9d319d7f0d53a6321db3d9b391bdef"
    },
    {
      "type": "FIX",
      "url": "https://git.kernel.org/stable/c/a940003f44e7e441c228151dd212642152700ec8"
    }
  ],
  "database_specific": {
    "source": "https://git.kernel.org/pub/scm/linux/security/vulns.git",
    "upstream_modified": "2026-10-18T15:22:13Z"
  }
}